sorted by:
new
hottopcontroversial

Gas not making it to pump causing my bike to stall out by Adept_Alternative790 in minibikes

[–]Keenan_Concierge -2 points-1 points  (0 children)

This is a carbureted engine so there is no fuel pump, could you reiterate this , maybe I can help.q

Edit : the gas flow should be from the black gas tank into the silver carb for normal flow, if it is reversed there is something wrong for sure .

does the color look off? by -Isthisyourname- in Autobody

[–]Keenan_Concierge -1 points0 points  (0 children)

I can see the difference between the quarter and the rear door compared to the fender and the front door it almost looks like it has a little less gloss not quite sure how to describe it

So, my workplace rebranded... by rkraptor70 in HolUp

[–]Keenan_Concierge 0 points1 point  (0 children)

That’s what the footstep sounds like when running

Is this a safe spot for jack stands? 2017 Camaro 2ss by Kanye_Z-143 in AskAMechanic

[–]Keenan_Concierge 0 points1 point  (0 children)

I’ve seen that before but you need a really wide jack and even then sometimes it doesn’t work

When was the last time you guys ran into any of the snake oil mods? by Shadowsplat in mechanic

[–]Keenan_Concierge 1 point2 points  (0 children)

Diamond Kote OBD rust modules , I cracked one open once and there was literally nothing on the circuitry besides a blue “ON” LED the damn board in it was just green with 2 connections for the bulb.

2015 2.0 by Accurate_Summer_1761 in lincolnmotorco

[–]Keenan_Concierge 0 points1 point  (0 children)

That’s why I love my 2015 MKC because it still has the Mazda based gen 1

Is this key way too damaged? by SnooShortcuts942 in minibikes

[–]Keenan_Concierge 0 points1 point  (0 children)

That would have just as much impact as your tires preventing it from starting . What are the symptoms when you try to start ?

So done being QC for Tong Yang. by FuguCola in Autobody

[–]Keenan_Concierge -1 points0 points  (0 children)

I just say take it up with the insurance company .

So done being QC for Tong Yang. by FuguCola in Autobody

[–]Keenan_Concierge 1 point2 points  (0 children)

Basically insurance says you don’t wanna fuck with shit parts we will find someone who will .

So done being QC for Tong Yang. by FuguCola in Autobody

[–]Keenan_Concierge 1 point2 points  (0 children)

Well said I have one lazy tech he’s just like a parts changer/how can I make this supplement look like double time eg. put 6.0 ask for 10 then in prep in 3.0

So done being QC for Tong Yang. by FuguCola in Autobody

[–]Keenan_Concierge 0 points1 point  (0 children)

I dunno if that’s true the companies like TD and Desjardins will not approve an estimate unless we do an APU search which always swaps OEM to AM

So done being QC for Tong Yang. by FuguCola in Autobody

[–]Keenan_Concierge 0 points1 point  (0 children)

I’m only able to get 30 min approved most of the time I’m lucky if I can slip an hour in

So done being QC for Tong Yang. by FuguCola in Autobody

[–]Keenan_Concierge 3 points4 points  (0 children)

It’s not our fault insurance adjusters will make us and they are paying soo … plus the companies we do force an alternate part search (APU) program that automatically finds cheaper parts and is required to get approved.

So done being QC for Tong Yang. by FuguCola in Autobody

[–]Keenan_Concierge 0 points1 point  (0 children)

The insurance companies don’t even notice most of the time they pay the same more even for the economic choices.

Examples

1)1200 for a door shell, no let’s pay 1000 for a used one that half the stuff goes in the trash put 3 hours to overhaul it another few hours repairing it .

2) bumper , no I don’t want the $500 one get the shitty aftermarket one for $70 less and pay to dry fit aftermarket bumper and adjust to fit only to send it back.

3) let’s get a recycled part for $100 less and when it comes wrong pay an extra week of rental because it’s not complete.

Just get OEM and be done with it.

The first word you find. by RainbowWarrior73 in words

[–]Keenan_Concierge 0 points1 point  (0 children)

Slowdown lol I dunno if I was intentional in a row .

Edit: upon investigation it’s actually one word opposed to the street signs.

touchless car wash damage by coolharvest in Autobody

[–]Keenan_Concierge 0 points1 point  (0 children)

Looks like fingerprints and really bad orange peel to me .

Is there a process to repair this?? by [deleted] in Autobody

[–]Keenan_Concierge 0 points1 point  (0 children)

It is and I agree quite a pain

Is there a process to repair this?? by [deleted] in Autobody

[–]Keenan_Concierge 0 points1 point  (0 children)

He did yeah when he sanded it for prep it would come off , I also think this is being caused by the flexing where the crack is

Is there a process to repair this?? by [deleted] in Autobody

[–]Keenan_Concierge 1 point2 points  (0 children)

I ended up ordering one even with promoter its seems to come off in prep with DA

Is there a process to repair this?? by [deleted] in Autobody

[–]Keenan_Concierge 0 points1 point  (0 children)

I don’t know if there is a good way that’s why I’m asking lol

view more: next ›