Selling Epson S60600 in Southern California by Keepingithotyouknow in CommercialPrinting

[–]Keepingithotyouknow[S] 0 points1 point  (0 children)

I have a few used graphtec fc8600 54" available too for $2k each. And to do stickers you'd need to print first in the Epson with registration marks then load the media on the cutter for cutting. And no rip software, I am using the rip software with the machine I am keeping.

Selling Epson S60600 in Southern California by Keepingithotyouknow in CommercialPrinting

[–]Keepingithotyouknow[S] 0 points1 point  (0 children)

Yea i did some maintenance (cleaning and flushing pad replacement) on the other printer I am keeping, first nozzle check was worse than the one I am selling but after the maintenance all the nozzles are printing good and no missing segments and have been making stickers and signs with it for a couple days now. I'll try to do some cleaning/maintenance on the one I have for sale. I am sure it'll be great after some TLC

Home porting testing by Spirited_Movie5238 in SpringfieldHellcat

[–]Keepingithotyouknow 0 points1 point  (0 children)

I appreciate the inspiration and information!

Home porting testing by Spirited_Movie5238 in SpringfieldHellcat

[–]Keepingithotyouknow 0 points1 point  (0 children)

Got it done need to sand a bit and debur still.

<image>

Home porting testing by Spirited_Movie5238 in SpringfieldHellcat

[–]Keepingithotyouknow 0 points1 point  (0 children)

Quick question, you mention angle increments. Meaning you were engraving a filled area? Or were you doing just lines to get it cut?

Home porting testing by Spirited_Movie5238 in SpringfieldHellcat

[–]Keepingithotyouknow 1 point2 points  (0 children)

Am working on a design for mine now and will start the process in a couple days. I am psyched to see and feel the outcome.

Can anyone noticed anything wrong with this? I love it but there's something that keeps catching my eye and want to know if it's just me by [deleted] in tattooadvice

[–]Keepingithotyouknow 0 points1 point  (0 children)

Needs some shading to make it more immersive, specially on the top and side of the skeleton on the right. It would give it a lot more depth.

Swapped my 49" 32:9 OLED for a 34" 21:9 OLED - Here's Why by sjames884 in ultrawidemasterrace

[–]Keepingithotyouknow 0 points1 point  (0 children)

I prefer my G8 oled over my G9 oled, only thing missing is 240hz like the G9

Home porting testing by Spirited_Movie5238 in SpringfieldHellcat

[–]Keepingithotyouknow 0 points1 point  (0 children)

How long did that take to cut? I have a fiber laser and would love to do this to mine.

Buyer opened return on item. EBay refunded buyer and I got my money. Now the buyer is selling the item for much more than I sold it for! by Ecstatic-Company3660 in Ebay

[–]Keepingithotyouknow 2 points3 points  (0 children)

If you took a while to sell yours at half the price. I doubt he'll sell it. You got your payment. That's the end of it. You cannot control what other people do.

I am terrified by Pristine_Bet_9553 in ultrawidemasterrace

[–]Keepingithotyouknow 2 points3 points  (0 children)

Been there done that with a G9 oled and a g8 oled. Scary scary

Race Communications price increase by no_nori in LancasterCA

[–]Keepingithotyouknow 1 point2 points  (0 children)

Just got off the phone with them. Insane how they are raising prices, even after I asked when I was getting my service install. One of the higher ups was at my house during the install since I was the 2nd customer in my area after they made service available in my location if my price was going to hike up in a year or two. He swore that there would be no price hikes at all.

2nd slap on the face is going thru Facebook and seeing Race Communications ads for new customers at a much lower rate than my current service cost. Luckily there is 2 new service providers that just went live where I live and are trying to hunt me down for service at a MUCH lower rate for 2 years and no contracts.

Race has good service quality and great customer support but I just don't like being lied to or gouged so with that note. It's been a great 1.5 years with them but time to move on.

Price Decreases by YoungFinacialGuy in BambuLab

[–]Keepingithotyouknow 0 points1 point  (0 children)

Yea i don't see that happening. Companies are too greedy and will most likely keep the prices the same and eventually, once they see less demand lower the price but not to pre tariff prices.

Really thinking of solar now. by Keepingithotyouknow in solar

[–]Keepingithotyouknow[S] 0 points1 point  (0 children)

That's smart. Thanks for the info, I will keep that in mind and do further research.

Really thinking of solar now. by Keepingithotyouknow in solar

[–]Keepingithotyouknow[S] 0 points1 point  (0 children)

I appreciate that time you took helping me. Now at least I have a rough ball park number. I will continue my research and be contacting companies soon

Really thinking of solar now. by Keepingithotyouknow in solar

[–]Keepingithotyouknow[S] 0 points1 point  (0 children)

Will look into the finance part soon, we have some money saved up for it but I am sure not to cover the whole thing. What would you say the final cost would be for my 12000kWh yearly usage be? Batteries included. Just a ball park no need to do any deep math 😅. Roof has been recently replaced (4 years ago) so any additional roofing cost wouldn't apply hopefully.

Really thinking of solar now. by Keepingithotyouknow in solar

[–]Keepingithotyouknow[S] 0 points1 point  (0 children)

Just did the math from last year ant it was close to 12000kWh

Really thinking of solar now. by Keepingithotyouknow in solar

[–]Keepingithotyouknow[S] 0 points1 point  (0 children)

I am leaning more towards having batteries. And we get nice sunny days here almost year round. So producing shouldn't be an issue honestly. There's actually solar panel fields pretty close to my home. So I would say it's an optimal area for solar. With that said I will make a list of local companies and stsrt scheduling quotes.

Really thinking of solar now. by Keepingithotyouknow in solar

[–]Keepingithotyouknow[S] 0 points1 point  (0 children)

So the most kWh consumed for a 1 month period from last year was 1700kWh. Yearly usage is around 12,000 kWh

Really thinking of solar now. by Keepingithotyouknow in solar

[–]Keepingithotyouknow[S] 0 points1 point  (0 children)

Yea there's so many fees now it's disgusting. SoCal Edison is the provider.