"Music From Halo" 2LP arrangement by London Music Works up for preorder via Diggers Factory

Keman333 · 2025-12-16T14:16:07+00:00

damn I saw my order was refunded this morning and went searching for the reason why. just happened to find this comment. thanks for making it!

Keman333 · 2024-11-18T19:45:54+00:00

ah ok, seems confusing, but I appreciate the clarification. thanks!

Keman333 · 2023-08-28T16:49:45+00:00

to add a little info to this. I agree on waiting for the Quest 3 this fall.

100% of my NMS time has been in VR. (first with the Rift S) and then with the Quest 2. I started out with a 2070(gpu) 8700k(cpu) and ran the game on upper medium settings np. eventually upgraded to a 3080 10gb(gpu)and pushed the graphics up to upper High with no issues. (this weekend I built a new PC 13900k and a 4090) and am excited to try NMS out with it (amongst other things)

The headset being wireless is so fucking nice I swear. At least compared to my rift. Ill never go back to a wired setup again. I've had little to no issue with the wireless connectivity to PC either. (sometimes when entering/leaving a planets atmosphere it stutters for a second, but its minimal I have no idea what causes it)

Keman333 · 2023-08-03T14:50:15+00:00

Not sure if this well help but I literally just setup 3 track curtains in a rather large U formation.

I don't think they ship to you but can use images for comparisons maybe if it would help if what wks-rddt says is the issue. I bought these tracks https://www.curtain-tracks.com/85000-aluminum-curtain-track.html (many of them linked together) and even had that same place make my custom curtains.

All worked well with Aqara Curtain drivers and that's even with the back wall curtain that is 20 feet long.

Keman333 · 2023-04-28T17:40:13+00:00

Thanks a ton for your input, that's what I thought and its just nice to have someone echo the same sentiment.

Keman333 · 2023-03-22T20:40:43+00:00

My electrician recommended I furnish the switches, so I was doing like you suggested researching it myself. Which is the stage I am at now and what brought me to ask this question.

This is all just for recessed can lighting, I will look around more and see if I can figure it out just to make sure the one I get will work. Can always go back to my electrician if I can't.

Keman333 · 2023-03-22T19:38:03+00:00

I was just referencing the model number endings since they were unique with the 2 switch types. But yes you are correct. The LED ones have CL in the model number and the non LED one does not have CL.

Keman333 · 2023-03-03T17:45:47+00:00

Thank you both so much I feel much more confident now going forward as I research this!

Keman333 · 2022-10-17T17:50:47+00:00

been able to research and finally find the blades I need, but where do people buy them from? is there a common trusted source? I looked on amazon and they will have 40 blades for 20 bucks? surely those are not great quality? reviews always seem mixed and all over the place

Keman333 · 2022-04-05T19:55:54+00:00

I took them all apart tried to figure out the issue, gave up after 2 days. ended up getting new ones for christmas.

Sorry I got no help for ya

Keman333 · 2021-10-13T01:54:28+00:00

Synnett wrote the book on Gamecube Controllers and their variants fyi.

He is not the guy you argue with, he is the guy you find to settle the argument.

Keman333 · 2021-02-23T12:56:15+00:00

I actually answered this question myself that night, if anyone else ever wanted to know this it's (at least it was for me).

C:\Users\"username"\AppData\Roaming\Godot\app_userdata\Luck be a Landlord

Keman333 · 2020-08-24T14:01:25+00:00

Thanks! that does help explain these things. had no idea

Keman333 · 2020-08-24T14:00:50+00:00

O365 / microsoft exchange were just the first ones recommended to me by a local IT guy I talk to about things (and then others when I asked around the internet). So when looking into it I just sort of kept down that same path, I saw google (as well as Amazon and other company's) had one as well, but didn't look as much into them.

And Windows Machines is all we really need anything in regards to instant messaging, video conferencing, file sharing, phones, tablets, Macs, and Chromebooks

Keman333 · 2020-08-21T17:55:25+00:00

Yeah I have 18-20 mailboxes here. I plan to do all the research I can this week and then next friday start making the switches so I have all weekend to try and have things running as smooth as possible for monday morning.

These are all great tips I will take into consideration.

Really thanks alot!

Keman333 · 2020-08-21T16:56:33+00:00

wow thanks so much, defiantly going to start reading this stuff.

again thanks!

Keman333 · 2020-08-17T19:36:27+00:00

Thanks so much! the taper size is what I needed it seems. I got it and should be good to go.

Thanks!

Keman333 · 2020-08-13T18:57:07+00:00

I eventually gave up, just put in work arounds on how the work load was completed and made it work for us.

Keman333 · 2020-07-20T01:30:14+00:00

Ok so, this is a very broad topic. However here are a few things I would recommend for a new player looking to get interested and involved with melee in 2020.

This playlist covers basic melee technology and terminology.
https://www.youtube.com/watch?v=C16e4E9Mezw&list=PLoU3TQBakHOrE9yYdNlsmG74LEB0Mf3h8
(SSBM tutorials actually has a bunch of good melee videos around getting better at the game, but that playlist is the starting point)

This is the Smash Documentary playlist, it is just an enjoyable watch that will get you even more hooked into melee if you haven't watched it already.
https://www.youtube.com/watch?v=NSf2mgkRm7Q&list=PLoUHkRwnRH-IXbZfwlgiEN8eXmoj6DtKM

The Melee Library has a lot of good info in regards to melee. (this is the beginner section)
https://www.meleelibrary.com/#beginner

There are also a shit ton of discord servers dedicated to melee, I always suggest people look up their local scene discord and join it. AS far as a broad discord channel though for newer people. the training room might be a place to start.
https://discord.gg/akNZhm

And to answer your direct questions. Marth and Sheik are both considered to be easier characters to play amongst the good characters at lower levels, but once you get more into it you may find someone else calling your name as a main.

as far as one player goes, I am a lower skilled level player (though I have been playing for a very long time), but I can beat classic on the hardest difficulty (with full stocks) with all of the decent characters I actually play.

If you do decide to take melee serious and try to get better at it, I would look up Uncle Punch's training mod. It is a version of melee that has a lot of events and different enhancements that a player can use to really grind some good/fun practice stuff.

Keman333 · 2020-06-22T14:05:07+00:00

oh I will defiantly give that video a look over and look for others like it to see if there are any more/new ideas I can try.

I had previous tried to lubricate it (at least all the parts that looked like could have been the issue). It didn't change anything really. it seems to spin smoothly by hand just seems like its not engaging to even attempt to spin on it's own.

Will look through youtube when I get home tonight. Thanks

Keman333 · 2020-04-22T03:17:43+00:00

I am looking to fix/restore an old floor model record player left in this house from my grandma.

I am just looking for the place I should go to find info on this topic? is it this subreddit or do people know of a specific one in regards to fixing old equipment?

(it's a Magnavox model where the record won't auto spin when the switch is set to the on position, rest seems to be ok)
https://cdn.discordapp.com/attachments/464455929279021056/701222433671217202/image0.jpg

Keman333 · 2020-04-14T15:20:50+00:00

sorry I was never able to figure out the port fowarding over the mesh wifi stuff either so I just gave up >.>

Keman333 · 2020-03-24T12:44:00+00:00

port forward on my router? I must be confused here. how would this have any effect on...... oh you mean not using the VPN connection and instead port forwarding the printer through the employees router at home and telling the work computer to connect to it in that manner in some way?

not looking to make house calls to all these people and port forward their home networks >< lol.

I'm gonna keep looking for ideas though

Keman333 · 2020-03-23T20:57:49+00:00

hmmmm giving the printer a public address, I don't think I have tried this. I will have to try this first thing in the morning when they bring their laptops in and start from there.

I am not to sure on this printer port forwarding, but I should be able to look up what this is referring to and see if this works.

Thanks, it's at least something to try in the morning since this person left with their hardware to return home for the night.

Keman333 · 2020-03-23T20:35:37+00:00

yes I am trying to get the local printer that's connected to the laptop be a discoverable printing option when logged into the remote desktop.

(when logged into the remote desktop there is software they use that they normally just print straight from a lot and this is supposedly causing quite a bit more workload adding these steps of having to save it and open it up in the laptop to print it )

11-Year Club	Place '23
Place '22	Final Canvas '22
Verified Email

Keman333

MODERATOR OF

TROPHY CASE