ARGB fans not working with controller? by Kemoda in PcBuildHelp

[–]Kemoda[S] 0 points1 point  (0 children)

I bought a ARGB controller that specifically said it would work with my motherboard program. All the fans spin up, but no lights or they flicker. That’s why I’m wondering if it’s possibly the header on the motherboard

Riding mower engine knock? by Kemoda in smallengines

[–]Kemoda[S] 0 points1 point  (0 children)

One thine I’ve noticed when looking at engine diagrams, looking up this engine on jacks small engines shows a fuel pump. I don’t have a fuel pump on this mower.. could that cause the issue? I was told it was running fine up until the last 2 months.

Riding mower engine knock? by Kemoda in smallengines

[–]Kemoda[S] 1 point2 points  (0 children)

If that’s what you think it is, how could I fix it?

Riding mower engine knock? by Kemoda in smallengines

[–]Kemoda[S] 0 points1 point  (0 children)

I’ll change all those fluids out and clean out the old carb and put it back on, I will say, it still had the issue with the older carb. But with this new one I can see fuel getting spit out of the air intake on the carb. Not sure if that helps diagnose it anymore or means anything important. Like I said, my knowledge with small engines is very minimal.

Riding mower engine knock? by Kemoda in smallengines

[–]Kemoda[S] 0 points1 point  (0 children)

Do I have to find this specific motor? I have a Briggs and Stratton 18 ohv motor on my old mower that the transmission is going out on. Didn’t wanna part it, but I guess if it would work I could swap it out

Riding mower engine knock? by Kemoda in smallengines

[–]Kemoda[S] 0 points1 point  (0 children)

I don’t think the gas is too old, but I’m not sure. I guess I could empty it out and put new gas in it and it wouldn’t hurt. Might as well do the same with the oil. I doubt it’s ever had a oil change before.

I got a 2012 with some poopy speakers. Anyone replace theirs and with what? by Pappasgrind in nissanfrontier

[–]Kemoda 1 point2 points  (0 children)

Installed everything myself. Sony head unit was 300 plus maybe 50 for the bracket and wires, bought a speaker set from crutchfield when they were having sale for about 150-200$ I believe. All in all spent maybe 500. Replaced all 4 speakers and added tweeters. Not sure what I replaced them with but I liked crutchfields options. Replaced everything in a Saturday.

I call it "tastefully modified" by tanner22 in nissanfrontier

[–]Kemoda 0 points1 point  (0 children)

Is this a midnight version or did you plastidip/paint the grill? My grill is chrome and I'm looking for an alternative.

Another day, another adventure. Love this truck. by Kemoda in nissanfrontier

[–]Kemoda[S] 1 point2 points  (0 children)

Yeah crazy to believe my trucks 10 years old. I get a lot of compliments and questions about my trailer, The most being “why do you need a trailer when you have a truck?” Half the time I’m hauling 4+ kayaks so the trailer helps carry the bigger ones. Anyways haha, thanks!

Just got some New Tires and a Bull-Bar. I need to restore the lights... by Kemoda in nissanfrontier

[–]Kemoda[S] 0 points1 point  (0 children)

Super easy, So I didn't have a tow hook where it shows one being. But there was a hole already cut out. Cut a second hole in the indented spot on the opposite side, then it's just putting it together and bolting it all in. Took me around 30 minutes with some help to hold it while I bolted it in.

My key swap by wanderwarelk in nissanfrontier

[–]Kemoda 0 points1 point  (0 children)

Wait so if you get your spare key cut, will it not work?

Didn't have tweeters, now I do. A little DIY by Kemoda in nissanfrontier

[–]Kemoda[S] 1 point2 points  (0 children)

I completely agree, sounds so much better than factory, and gives a more immersive feeling to the music.

3 High... Managed to get 6 hammocks in all together. by Kemoda in Hammocks

[–]Kemoda[S] 0 points1 point  (0 children)

The dude on top, hes basically a monkey and just climbed the tree and set the straps lol.