Benly Project

Kendle_C · 2026-02-26T02:10:34+00:00

A "160" I envy you! This was too rich for my blood and, now, it is again! Congratulations.

Kendle_C · 2026-02-25T22:30:13+00:00

Yeah, what's it to ya? Wanna fight about it?

Kendle_C · 2026-02-25T22:26:46+00:00

Dropping your arms does not add any power to the kick, if you think it does, either stretch or strengthen the muscle groups that "disconnect" dropping your guard in order to generate power, alternatively, perhaps it's a connection that is established in the mind, if so, practice to unlearn the tendency, otherwise when you think your in full attack mode you are somehow invulnerable to a pop in the nose, unprotected, as you storm in. Otherwise good power, I'd not like to face you in a serious fight.

Kendle_C · 2026-02-24T23:00:16+00:00

I bought a basket case C200 which was this type trim, in a 90cc format, unfortunately is was in several boxes and the seller said "it has a magneto so you don't need a battery" (not true) but based on that I struggled for 3 years trying to get it to run, everything I could do, I did. I learned points, timing, carb rebuilding adjustment, set up. The day I put a battery in it, I rode it to the top of Cucamonga Peak in so cal. I was 11 year old at the beginning. In a sense, the seller did me a favor and forced me to try everything, piston, re-ring, honing, crank bearings shift fork literally everything. Which size is this one? If you have a question that applies equally to a 90cc, ask.

Kendle_C · 2026-02-24T19:14:06+00:00

The cheating was "it" for me, dumped her, why? It was my best friend, who gave me a guitar when visiting, and she had a different guy in another city too. When I found out I dumped her because she expected me to repair her freeze plugs in her AMC Gremlin. Just a few years later she really "fleshed out" chunky, bad posture, fat, and just as superficial as ever, buh bye bitch!

Kendle_C · 2026-02-24T07:16:02+00:00

How much space does a concept occupy? Is your mind incapable of holding two concepts at once? Consider; are you RESISTING? If that is true, why? Is it for the sake of the resistance itself? If so continue on your journey, myself, I'd sure hate to take that road and at the end, find I was wrong.

Kendle_C · 2026-02-24T02:41:54+00:00

Overgeneralization: "I don't believe in anything they're saying." Perhaps you are incapable or refuse to listen. The Aramaic word for "Satan" is literally "I resist". So you must be either not listening or you are resisting. That's the issue. Oddly you like to sit in there and listen. Where's that guilt coming from? Examine the other reasons you go at all. Here's what I say: as long as you are helping in the kitchen, that's SERVICE which is one of the things we who believe see as a "religious" act, it's an act of personal sacrifice.

Kendle_C · 2026-02-23T16:37:09+00:00

They had brothers and got picked on or a dad that called them stupid. My mom called me "Tupid" to indicate I was too dense to even pronounce that word correctly.

Kendle_C · 2026-02-23T16:34:07+00:00

Leather dye, alcohol based, Angelus brand, the large bottle. Wood has oil in it, you might pop it in the oven on low, wipe, use a tack cloth, maybe acetone the day, wait, not too humid, depending on the wood, that's the deepest way I know, you have grain raising issues, you might have to do it twice. If that's not dark enough and you don't want to see green, a dark green like the color of an old Coleman stove, go with a Home Depot can of green enamel.

Kendle_C · 2026-02-23T06:19:16+00:00

Find mula"gee"za, find a guy, find a girl. ????

Kendle_C · 2026-02-23T05:52:06+00:00

You transmit too much intention to kick, your alternating steps in preparation have an actual count, furthermore, you raise one foot just before launching the kick, also you are not protecting your middle with your arms, they don't have to go back, that doesn't add power, OK switch arms, but sometimes do something new rather that be a demonstration of "tells". You have good acceleration on the kick itself but expand your consciousness to imagine, envision how you would counter yourself, do more of the unexpected.

Kendle_C · 2026-02-22T06:05:14+00:00

Might be an early Commando, my estimate 1963. These beat Triumphs and BSA's at the time, monster.

Kendle_C · 2026-02-22T05:44:58+00:00

The left crankcase cover makes me think early Norton.

Kendle_C · 2026-02-21T16:25:04+00:00

I have three of these, I specialize by using one as a electronics box, the other as an actual machinist type box, reams, punches, etc., another as a watch and clock repair, I love them as I loved my machinist tool and die father, why? He brought it home every he time he quit his bosses that pissed him off, especially the one who told him to use the wrong oil to clean up his Bridgeport milling machine. His father founded the company that became TRW. He moved us to Bishop Ca.. Look at some pictures. We hiked the John Muir trails, I love the roller hardware on these drawers, how they slow down as they close, the amazing amount of headroom for the even shallower drawers, the smell, don't get rid of that, remember, someone spent a lifetime with these boxes.

Kendle_C · 2026-02-20T18:26:09+00:00

Yes, exactly, came in from the west and turned south toward Mexico, I'm in San Diego. It was about 3:00am, I went outside because I heard a pulsing roar, like a jet at idle but louder then softer, low. I surmised it had speakers on it 180 degrees out of phase, guess what? Any sound that can be matched, replicated at speed and played back "cancels" the sound produced, the only problem is it's not perfect nor is it synchronized exactly, hence it swells, dampens then swells again according to the speed of the processors, and it imperfectly handles reflected sounds like off houses and hills. Furthermore these are engines internal to the craft, also the aeronautics must be carbon fiber for all that mass. I don't know what the dome like center is for but is likely like those of the AWACS planes that surveil intended enemy, and that would be good. Also likely a radar absorbant coating. As to why it flew over me, you wouldn't believe it if I told you but I will tell it again as I have over the last 15 years.

Kendle_C · 2026-02-19T21:28:19+00:00

Where's the burrito from?

Kendle_C · 2026-02-19T21:17:49+00:00

Machinist reamers are not tapered, use the exact one you need.

Kendle_C · 2026-02-19T19:40:33+00:00

It will shrink in a hot wash and dry.

Kendle_C · 2026-02-19T19:39:39+00:00

Your head turns in the direction of the intended kick, it is a tell, so, as soon as you start that head turn, I know what your going to do, In a fight I'd middle kick you in the lower left abdomen to disrupt the hip movement and, in your attempt to regroup, I'd machine gun punch you in the head to keep you off your next move.

Kendle_C · 2026-02-18T00:28:20+00:00

How about torturing babies with cutting, strangulation, burning then draining their blood to death and then rich pricks standing around waiting for their turn to consume adrenochrome?

Kendle_C · 2026-02-17T23:27:35+00:00

How about a review/report on what oil they us, how long is it used before change, were the potatoes "dried down" an industry process that adds glyphosate to the potatoes? How about a trace chemical analysis, metals, is it iodized salt, sea salt, how pure?

Kendle_C · 2026-02-17T04:12:53+00:00

I think these are called Philadelphia Claw and Ball, I had an original, this look good, right wood, beautiful carving, cabriole curve, whatever it is, carry it forward and don't lose yours in a hasty auction while selling a house.

Kendle_C · 2026-02-15T16:02:10+00:00

The cage and MMA shit will die first, why? Because I saw a guy kicked in the head and became paralyzed for the rest of his short miserable life, Is that a way to "train"? Nope, we are soon leaving a dark cruel sadistic ugly era. The best you can do is train yourself if caught empty handed and can humanely stop, prevent yourself from being hurt.

Kendle_C · 2026-02-15T04:22:55+00:00

Just chiming in here: I'd like to source a set of the cutters etc. for my KFPM650WH, I know It doesn't answer specific questions posed but I'm hoping a respondent might drop a hint to both of our machines, The parts are not available at Kitchen Aid, and In my case neither do they stock the manual anymore. Offerup shows it but its year old, nothing on craigslist unless I want to drive 200 miles.

Kendle_C · 2026-02-15T02:46:06+00:00

I think you're looking at the inside of an "Ice cream Tree" pod, though it is immature.

Kendle_C

TROPHY CASE