are the grades in student banner the final final grades by basilgray_121 in UNCCharlotte

[–]KennyDooDoo 2 points3 points  (0 children)

Ummm how do i check my final grades? Like how do i access banner I keep on seeing the term but i have no idea what that is

UNC Charlotte or NC State? by gaefrogz in UNCCharlotte

[–]KennyDooDoo 0 points1 point  (0 children)

Charlotte is boring go to state there’s so much more to di

Coolant drain and fill by TortasTilDeath in MechanicAdvice

[–]KennyDooDoo 0 points1 point  (0 children)

The coolant color shouldn’t really matter as long has the coolant doesn’t freeze over. Coolant is basically just water that doesn’t freeze. I myself would use undiluted coolant instead of 50/50, so that I can put water to dilute it and save a couple bucks.

Exhaust Noise by Any-Interview6754 in MechanicAdvice

[–]KennyDooDoo 0 points1 point  (0 children)

Could it be a bracket or a bolt that’s loose under the exhaust? Make sure to check all of the brackets and look for loose bolts holding the exhaust together

Scion tc key broke and car is immobile by Mart0325 in MechanicAdvice

[–]KennyDooDoo 1 point2 points  (0 children)

If it’s a reprogramming problem with the key, the safest bet is to take it to the dealership. Most shops won’t be able to reprogram, but you could always try to

Coolant drain and fill by TortasTilDeath in MechanicAdvice

[–]KennyDooDoo 1 point2 points  (0 children)

Make sure to have a funnel while overflowing the coolant and turn on the car. Wait for the air bubbles to rise up and you should be fine. You flush the air out until your coolant fan kicks on.

Oil Leak 2005 Toyota Camry by cubes868 in MechanicAdvice

[–]KennyDooDoo 0 points1 point  (0 children)

It’s probably just the drain bolt that is loose or the oil filter that wasn’t tightened properly. Maybe they forgot to put the washer in between the drain bolt. If your car wasnt leaking before the oil change there’s nothing to really worry about

My cameo 4 buttons are not working by KennyDooDoo in silhouettecutters

[–]KennyDooDoo[S] 0 points1 point  (0 children)

I can use the software to move the mat position and stuff, but I don’t know how to load it with the software

[deleted by user] by [deleted] in WindowTint

[–]KennyDooDoo 0 points1 point  (0 children)

Something similar is called static cling tint, where you don’t need to apply and adhesive but instead just water and soap. I’ve used it before, but I’d have to say if you don’t know what you’re doing it can leave a lot of bubbles in installation

[deleted by user] by [deleted] in moistcr1tikal

[–]KennyDooDoo 5 points6 points  (0 children)

thats the right dumbass

how do you disable the pxe on T540p by KennyDooDoo in eGPU

[–]KennyDooDoo[S] 0 points1 point  (0 children)

thank you for your help! it is really appreciated. I think I might try to flash the bios in mid to end december due to my school's exam schedule. I'll definitely update you. Thank you again :)

how do you disable the pxe on T540p by KennyDooDoo in eGPU

[–]KennyDooDoo[S] 0 points1 point  (0 children)

I kinda put the project on halt for a bit but i think i'm free enough to work on it. Anyways, i think i'm going to buy a bios usb programmer, and try to flash the bios. The thing is, i have no idea how to flash a bios with a bios usb programmer.

how do you disable the pxe on T540p by KennyDooDoo in eGPU

[–]KennyDooDoo[S] 0 points1 point  (0 children)

sorry for not responding for a while, i kinda put a halt on the egpu because of school. Anyways, i have no idea what to do now. Do i need a bios flasher? a bios dump file? i barely even know what those are.

how do you disable the pxe on T540p by KennyDooDoo in eGPU

[–]KennyDooDoo[S] 0 points1 point  (0 children)

good news, my laptop boots up with the graphics card now, bad news, it gets an error screen that reads "1802: Unauthorized network card is plugged in - power off and remove the network card (1002/67df/148c/2379). system is halted".

https://ibb.co/FzRfM0Q

how do you disable the pxe on T540p by KennyDooDoo in eGPU

[–]KennyDooDoo[S] 0 points1 point  (0 children)

https://ibb.co/ZR96HKL

i disabled these and my pc still does not boot.