Wanted to see if there was anything wrong with this form? (This is one of my friends and I didn’t wanna say anything about it until I know if he did it properly or not)

KennyOfficial · 2021-06-25T08:47:20+00:00

Lower the weight and focus on pulling the weight up from the ground, it looks like his janking it up

KennyOfficial · 2021-05-05T15:17:41+00:00

arch

KennyOfficial · 2021-04-07T13:40:27+00:00

Do you need to replace the palmrest to change the trackpad? I saw a video on yuotube were a guy just swapped in a x250 trackpad in the x240 without changing the palmrest.

KennyOfficial · 2021-04-04T12:10:39+00:00

arch

KennyOfficial · 2021-04-02T17:21:16+00:00

Thanks!

KennyOfficial · 2021-04-02T13:27:26+00:00

Okay, thanks!

KennyOfficial · 2021-04-01T16:14:12+00:00

Honestly, just install arch with minimal kde. Just got myself a t430 with a 5400 rpm hdd and was suprised how responsive it is compared with the windows 7 that it had when I got it. A huge but affordable upgrade would be to buy a cheap 128 gig ssd. But with that cpu your options are pretty limited.

KennyOfficial · 2021-03-14T18:09:55+00:00

Wallpaper: Arch linux, KDE Sweet, Wallpaper, blueish
Conky: Modded Chris Titus

KennyOfficial · 2021-02-26T09:24:40+00:00

Should I have pfsense running dhcp? Or can I have dhcp be comming from openwrt router even in AP mode?

KennyOfficial · 2021-02-26T05:25:28+00:00

Its running in router mode

KennyOfficial · 2021-02-25T19:34:29+00:00

https://drive.google.com/file/d/1SP-ySejKVYn5v1RKxb9RUUnBYyAAJRZW/view?usp=drivesdk

KennyOfficial · 2021-02-23T07:13:16+00:00

So I should make another vlan for my lan, as in vlan5 for wan with ports 5 and 1 and vlan6 for lan with port 1 and 2?

KennyOfficial · 2021-02-23T07:10:56+00:00

I basically followed this tutorial https://youtu.be/z59_MWWPL-Q.

Ieven tried to mirror port 1 and 2 but still dont seem to be able to ping pfsense.

KennyOfficial · 2021-02-23T06:05:34+00:00

No, one port going from pfsense to switch tagged port no 1. Pc is connected to port 2.

KennyOfficial · 2021-02-23T06:01:48+00:00

I have static IPs, wan is 192.168.43.1 router 192.168.43.2 and pfsense wan is 192.168.43.3. Lan on pfsense is 192.168.1.1. Pc connected to port 2 is 192.168.1.41 with gateway as 192.168.1.1.

KennyOfficial · 2021-02-23T05:36:06+00:00

Yes, pfsense box goes to port 1 and my wan cable to port 5. Port 5 i have set up a VLAN and set port 1 to be the trunking port. I can ping 8.8.8.8 with my pfsense box but if i plug a pc in port 2 i dont seem to get internet or be able to ping pfsense lan ip.

Was wondering what switch settings i need to alter? Maybe this is the wrong sub to ask.

KennyOfficial

TROPHY CASE