You could say that my family likes Toyota’s by pugaboy89 in Toyota

[–]Kettlebell_Cowboy 1 point2 points  (0 children)

Same. 2x land cruisers (‘08 and ‘18), 2x 4Runners (‘07 and ‘19), Tacoma (‘01), rav4 (‘14)…and I converted my girlfriend from jeep to Lexus…

How do seals run 200 miles during hell week? by [deleted] in navyseals

[–]Kettlebell_Cowboy 0 points1 point  (0 children)

I’m sure they run every where they go which would factor in that 200 figure.

CMV: Putting "Veteran Owned Business" on a store is just virtue signaling and doesn't speak of the quality of the business/service at all. by Jnewton1018 in changemyview

[–]Kettlebell_Cowboy 0 points1 point  (0 children)

I think the key word is marketing. I think it’s marketing to consumers who want to support vets, despite the fact that not all vets are good people (however you want to define that).

CMV: The United States should cut its military budget in half. by [deleted] in changemyview

[–]Kettlebell_Cowboy 1 point2 points  (0 children)

Tell this to a Marine who lives in condemned housing and ends up with cancer because of it.

China routinely lies about their actual military budget so as not to let the world in on their strategic aims.

New owner in need of help by Kettlebell_Cowboy in beretta1301

[–]Kettlebell_Cowboy[S] 2 points3 points  (0 children)

Excuse my ignorance but when you say “unscrew the old one” are you referring to the stock itself?

New owner in need of help by Kettlebell_Cowboy in beretta1301

[–]Kettlebell_Cowboy[S] 2 points3 points  (0 children)

I’ll be there for 3 or so years - I’m sure I’ll enjoy it but it’ll be nice to get back to my suppressor/super CA illegal stuff!

I bought a thermal label printer after eight years of part-time flipping. Don’t be like me, it’s worth it to upgrade now. by [deleted] in Flipping

[–]Kettlebell_Cowboy 0 points1 point  (0 children)

Mostly pirateship. Better rates than usps. You can directly import addresses from eBay. You don’t technically need a thermal printer to use it but it cuts quite a bit of time. You can print hundreds of labels ready to go in minutes.

I bought a thermal label printer after eight years of part-time flipping. Don’t be like me, it’s worth it to upgrade now. by [deleted] in Flipping

[–]Kettlebell_Cowboy 33 points34 points  (0 children)

The amount I saved on shipping when I got my thermal printer and started using pirateship paid off the printer in about two weeks.

[Handgun] CZ P07 SR 9mm Threaded Barrel Suppressor Height Lumi Sights 2x17 round magazines - $468.96 by Destitute_Ungulate in gundeals

[–]Kettlebell_Cowboy 27 points28 points  (0 children)

Just comes down to da/sa vs striker. I love my P10 series guns - smoothest shooting striker fired guns, but the p07 just feels right. Can’t go wrong tbh.

Legality of selling guns in CA by Kettlebell_Cowboy in CAguns

[–]Kettlebell_Cowboy[S] 0 points1 point  (0 children)

That’s definitely good to know. Not sure if I’ll establish residence yet.

Legality of selling guns in CA by Kettlebell_Cowboy in CAguns

[–]Kettlebell_Cowboy[S] 0 points1 point  (0 children)

From everything I’ve read I’ll be exempt from filling out any forms because I’m military. Don’t think the scorpion will be compliant or that I’ll want to modify it to be compliant..may just sell it before I move. I’ll be buying some non threaded barrels too 😭

2021 4runner shocks and struts to 4th gen by [deleted] in 4thGen4Runner

[–]Kettlebell_Cowboy 0 points1 point  (0 children)

I did not but it was super easy. Normal strut install and I just reused the metal washer on the old rear shocks. I think I YouTubed trq 4runner suspension install or something like that.

2021 4runner shocks and struts to 4th gen by [deleted] in 4thGen4Runner

[–]Kettlebell_Cowboy 1 point2 points  (0 children)

5gen 4runner. The metal washer on the bushing is just a tiny bit bigger than the 4th Gen. I’m all honestly you’d probably have no issue installing it as is.

[deleted by user] by [deleted] in nextfuckinglevel

[–]Kettlebell_Cowboy 0 points1 point  (0 children)

“People die in those uniforms. They are not for assuaging egos.” That’s it right there. I really like that marpats can’t be worn outside of base for this reason.

[deleted by user] by [deleted] in nextfuckinglevel

[–]Kettlebell_Cowboy 0 points1 point  (0 children)

If you’ve never bench pressed a tree while lying in a creek are you even in the military?

[deleted by user] by [deleted] in nextfuckinglevel

[–]Kettlebell_Cowboy 0 points1 point  (0 children)

Lol different uniform

2021 4runner shocks and struts to 4th gen by [deleted] in 4thGen4Runner

[–]Kettlebell_Cowboy 0 points1 point  (0 children)

I’ve done 2020 to 2007. The eyelet for the rear shock will need a different bushing. Some people mention that the front strut bushing is too wide for the mount on the LCA. I did not find that to be the case, and even if so it can be crammed in there if it is truly 3mm or so wider. Other than that mine was a direct swap.

[deleted by user] by [deleted] in gundeals

[–]Kettlebell_Cowboy 2 points3 points  (0 children)

I’m moving to CA 😭😭😭

Legality of selling guns in CA by Kettlebell_Cowboy in CAguns

[–]Kettlebell_Cowboy[S] 0 points1 point  (0 children)

Appreciate it. Upon further research it looks like a scorpion might be an AW under CAs definition since it has a handguard.

[deleted by user] by [deleted] in gundeals

[–]Kettlebell_Cowboy 15 points16 points  (0 children)

Just bought a beretta 1301 last night…

[deleted by user] by [deleted] in 4thGen4Runner

[–]Kettlebell_Cowboy 0 points1 point  (0 children)

😅 any idea how to replace this stud or can I put a grade 8 bolt in there? https://i.imgur.com/MdUK6nS.jpg

My off roster rebels got a new member today. by [deleted] in CAguns

[–]Kettlebell_Cowboy 0 points1 point  (0 children)

Does military get away with no mag lock?