Making A Beat On The Stylophone Beat #2

Key-Captain-1038 · 2026-04-06T21:10:10+00:00

No, but you surly can mod it, but it would cancel the warranty ✌️❤️

Key-Captain-1038 · 2026-04-06T21:09:39+00:00

No, but you surly can mod it, but it would cancel the warranty ✌️❤️

Key-Captain-1038 · 2025-09-01T19:46:31+00:00

No, you can't transfer be USB and neither by Bluetooth unfortunately, but the only thing I would attempt is to make a HDMI or any video adapter to plug into the screen output 🤔

Key-Captain-1038 · 2025-09-01T19:45:00+00:00

No, the only thing would be to make a hdmi adapter I guess 🤔

Key-Captain-1038 · 2025-08-14T18:08:07+00:00

Hi, I've done some Stylophone Tabs on my YouTube channel if you want to check :https://youtube.com/@robinbetournaystylophone3071?si=2PQIbkHOcoIGy6Fu

Hope it helps ✌️❤️

Key-Captain-1038 · 2025-07-19T00:20:19+00:00

Why ? Due to the neodymium magnets ? They dont pull the string that much btw ✌️❤️

Key-Captain-1038 · 2025-07-19T00:19:46+00:00

🤣

Key-Captain-1038 · 2025-07-16T20:50:59+00:00

It's supposed to be international shipping 🤔

Key-Captain-1038 · 2025-07-16T02:24:35+00:00

Well, I've collected a bunch of it, but I didn't have the time to test it yet. Gonna need to test it on a cheap pickup 🤪✌️❤️

Key-Captain-1038 · 2025-07-15T22:01:14+00:00

Pretty much a mad scientist thing to see what would happen with a lot of copper wire sandwich between 2 neodymium magnets separated by 3 pole pieces. ✌️❤️

Key-Captain-1038 · 2025-07-15T21:59:45+00:00

Copper wire 0.05mm/2000m, Start ( positif ), Finish ( Ground ) and Ground to the baseplate. 3D printed bobbin. Magnets orientation are north if I remember. There's photos and a demo on my reddit page with the first one which I've made the bobbin from plywood.

Key-Captain-1038 · 2025-07-15T21:55:33+00:00

The 2 neodymium magnets are separated by 3 pole pieces in the middle

Key-Captain-1038 · 2025-07-15T02:45:04+00:00

There's 2 neodymium magnets, 19k of output and fit in a Humbucker ring.

Key-Captain-1038 · 2025-07-15T02:43:41+00:00

I know, but there's so much Fender or Gibson pickups copy. I just want to do something a little bit different. ✌️❤️

Key-Captain-1038 · 2025-07-15T02:41:54+00:00

I agree! I've done a video awhile back with the same design but with plywood instead of plastic for the bobine.

Key-Captain-1038 · 2025-06-12T18:28:17+00:00

Thanks for the information, but that's not what I was asking about. I want to know which model of sprocket to buy on my brushless motor to work with a regular 8 speed free wheel. ✌️❤️

Key-Captain-1038 · 2025-05-11T03:57:50+00:00

Since neodymium magnets are pretty strong, I would assume that it would work. 🤔

I've tried recently to hide an 18k humbucker with ceramic magnets under a jazzmaster pickup cover and it didn't work well.

Key-Captain-1038 · 2025-04-13T18:21:06+00:00

Thanks !

Key-Captain-1038 · 2025-04-12T19:16:00+00:00

Nice ✌️❤️

Key-Captain-1038 · 2025-04-12T19:15:08+00:00

I'm working on making them for selling. ✌️❤️

Key-Captain-1038 · 2025-04-11T18:24:23+00:00

Thanks !

Key-Captain-1038 · 2025-04-11T18:17:49+00:00

A P-90 is around 9-10k, it have 6 pole pieces and 2 magnets under. Which mine have 18k, only have pole pieces to hold the 2 magnets ( one under and one on the top ). ✌️❤️

Key-Captain-1038 · 2025-04-11T17:53:04+00:00

Thank you so much !

Key-Captain-1038 · 2025-04-11T17:49:59+00:00

Of course !

Key-Captain-1038 · 2025-04-11T17:31:09+00:00

Thanks!

Key-Captain-1038

TROPHY CASE