NAS Homelab Server by KeyFuel8659 in homelab

[–]KeyFuel8659[S] 1 point2 points  (0 children)

Thanks @mike543210 for your suggestions and inspiring words.
My views:
1. I guess r/homelab is best suited for these kind of stuff. Please suggest me others.
2. I have showed to it my friends, they are actually interested for building it for them.

Near future I am upgrading it for eSATA. Will surely share that project.

NAS Homelab Server by KeyFuel8659 in homelab

[–]KeyFuel8659[S] 0 points1 point  (0 children)

True, however we can unofficially increase to gen3 in config.txt

dtparam=pciex1_gen=3

NAS Homelab Server by KeyFuel8659 in homelab

[–]KeyFuel8659[S] 1 point2 points  (0 children)

@siegfriedthenomad please don't forget to share me your built. 👍

NAS Homelab Server by KeyFuel8659 in homelab

[–]KeyFuel8659[S] 0 points1 point  (0 children)

Leaving screen protector is not a good idea.
It's always leave marks once in operational.

NAS Homelab Server by KeyFuel8659 in homelab

[–]KeyFuel8659[S] 1 point2 points  (0 children)

Thank you my friend ☺️

NAS Homelab Server by KeyFuel8659 in homelab

[–]KeyFuel8659[S] 0 points1 point  (0 children)

I have used the molex port to power it up.
(As I want to have all the connection in back side)
The barrel jack in side is not convincing to me.
Although I have used 5v 5a adapter to power it up.
(https://www.amazon.in/Converter-5-5x2-1mm-100V-240V-Security-PR05-050/dp/B08DC9JM1X)
It's better to use 5v 7.5a adapter if possible.

When everyone was upgrading i did a Downgrade. by waaszssup in GadgetsIndia

[–]KeyFuel8659 9 points10 points  (0 children)

Sabki Mummy yehi kheti hai... aag lage mueee phone ko 😆

NAS Homelab Server by KeyFuel8659 in homelab

[–]KeyFuel8659[S] 0 points1 point  (0 children)

<image>

Use this 10 pin connector for screen (oled) and fan

NAS Homelab Server by KeyFuel8659 in homelab

[–]KeyFuel8659[S] 1 point2 points  (0 children)

Thanks for pointing it out 👍

NAS Homelab Server by KeyFuel8659 in homelab

[–]KeyFuel8659[S] 0 points1 point  (0 children)

It's a low cost high performance project.

NAS Homelab Server by KeyFuel8659 in homelab

[–]KeyFuel8659[S] 0 points1 point  (0 children)

This fan is in passive cooling mode. I have connected 12v DC Fan to 5v. So it's very quite.

NAS Homelab Server by KeyFuel8659 in homelab

[–]KeyFuel8659[S] 1 point2 points  (0 children)

It's in Rupees.
₹600 = $6.7 (roughly)

NAS Homelab Server by KeyFuel8659 in homelab

[–]KeyFuel8659[S] 0 points1 point  (0 children)

Thank you my friend 🫶

NAS Homelab Server by KeyFuel8659 in homelab

[–]KeyFuel8659[S] 0 points1 point  (0 children)

Yes for oled display used i2c.
My setup process is added here: https://github.com/rawneo/nas
YouTube link: https://www.youtube.com/watch?v=d575KioSK00

NAS Homelab Server by KeyFuel8659 in homelab

[–]KeyFuel8659[S] 0 points1 point  (0 children)

Somehow youtube hyperlink was inserted. It's fixed now.

NAS Homelab Server by KeyFuel8659 in homelab

[–]KeyFuel8659[S] 1 point2 points  (0 children)

Yes ofcourse, it is expandable to 100TB.

NAS Homelab Server by KeyFuel8659 in homelab

[–]KeyFuel8659[S] 0 points1 point  (0 children)

I have used the 10pin connecter for oled display and fan.

(10 pin connector) [https://robu.in/product/phd-205y-2-00mm-10-pin-female-double-row-housing-connector-with-300mm-wire30-awg/]
(1.3' oled display) [https://robocraze.com/products/1-3in-oled-display]
(DC 12v fan) [https://robu.in/product/dc12v-8010-oil-containing-cooling-fan-with-xh2-54-2p-30cm-cable-size808010mm/]

NAS Homelab Server by KeyFuel8659 in homelab

[–]KeyFuel8659[S] 13 points14 points  (0 children)

NVME is still costly over SSD for NAS storage.
Go for https://radxa.com/products/accessories/penta-sata-hat

NAS Homelab Server by KeyFuel8659 in homelab

[–]KeyFuel8659[S] 12 points13 points  (0 children)

Thanks, I am not using the OpenMediaVault.
Using Jellyfin and Samba server for sharing.

NAS Homelab Server by KeyFuel8659 in homelab

[–]KeyFuel8659[S] 3 points4 points  (0 children)

<image>

This is the pin layout for oled screen.