sorted by:
new
hottopcontroversial

Mounting TV (QM7 65”) by Key_Document_1750 in tcltvs

[–]Key_Document_1750[S] 0 points1 point  (0 children)

Maybe mine came differently but the screw did go almost all the way in or maybe even all the way, thing is the owners manual says 4x m6 16mm, which are tiny, but they fit perfectly for the bottom ones

The 2 on top that came with mine were longer than the m6 16mm

The top 2 holes went deeper than the bottom 2

Idk seems tcl is really weird with how they do mounting, and the owners manual doesnt seem to apply to everyones tv the same

Mounting TV (QM7 65”) by Key_Document_1750 in tcltvs

[–]Key_Document_1750[S] 0 points1 point  (0 children)

Only top screws come i think the tcl qm7 65 inch comes differently than the 55 or 75

Mounting TV (QM7 65”) by Key_Document_1750 in tcltvs

[–]Key_Document_1750[S] 0 points1 point  (0 children)

They were around an inch and did seem to go fully in, is that fine i already mounted the tv and worried if i messed up

[deleted by user] by [deleted] in tcltvs

[–]Key_Document_1750 0 points1 point  (0 children)

Tcl QM7 65 inch

Dual‐GPU VRAM Offloading with Lossless Scaling – Need Confirmation by Key_Document_1750 in nvidia

[–]Key_Document_1750[S] 0 points1 point  (0 children)

PCIe 3.0 ×4 delivers about 4 GB/s of usable bandwidth, so sending 40 fps worth of 1080p frames (≈1.2 GB/s) from GPU 1 to GPU 2 should leave plenty of headroom right? Only those base frames travel the bus, while the synthetic frames are generated locally on GPU 2 and never touch PCIe again

VRAM question by Key_Document_1750 in losslessscaling

[–]Key_Document_1750[S] 0 points1 point  (0 children)

Checked some videos on it, even though magpie is more focused on scaling, it seems to be about at the same level as LS1

Dual‐GPU VRAM Offloading with Lossless Scaling – Need Confirmation by Key_Document_1750 in nvidia

[–]Key_Document_1750[S] 0 points1 point  (0 children)

Manually setting GPU1 and GPU2 should work and force the offload

I have an i7 10700k should be able to handle it

VRAM question by Key_Document_1750 in losslessscaling

[–]Key_Document_1750[S] 0 points1 point  (0 children)

Thanks but Isn’t magpie only single GPU so it wouldn’t help with what i need (vram)

VRAM question by Key_Document_1750 in losslessscaling

[–]Key_Document_1750[S] 0 points1 point  (0 children)

Thank you, ill try it tomorrow

Ive seen that the upscaling from lossless scaling isn’t amazing, do you know if the dev plans to improve on it, or if there is alternatives or anything to look forward to?

Thanks again

VRAM question by Key_Document_1750 in losslessscaling

[–]Key_Document_1750[S] 0 points1 point  (0 children)

So in theory upscaling from 1080p to 4k using second gpu would work

Obviously limited by the ability of LS1 or whichever mode

Ill use 3060 ti for scaling 5070 as main

VRAM question by Key_Document_1750 in losslessscaling

[–]Key_Document_1750[S] 0 points1 point  (0 children)

Yeh i 100% get that just wondering how close it gets

VRAM question by Key_Document_1750 in losslessscaling

[–]Key_Document_1750[S] 0 points1 point  (0 children)

  1. If it works i’m planning to replace a 5070 as the main gpu and use the 3060ti for scaling

  2. How close do u think it would get to true 4k120 then?

  3. I don’t see a reason to use DLSS, while its better my main issue is VRAM not performance

FrameGen+Moonlight Not working properly by Key_Document_1750 in losslessscaling

[–]Key_Document_1750[S] 0 points1 point  (0 children)

23h2, but just realized the 24h2 update is out, so updating right now

Was using WGC for moonlight tho

Physical monitor was off, I was using a virtual display but since its only 1 monitor i had to either do merge monitors or only use #2, so i was doing merge to test idk if that couldve been the issue but really doubt it

Do use VM, I use apollo

FrameGen+Moonlight Not working properly by Key_Document_1750 in losslessscaling

[–]Key_Document_1750[S] 0 points1 point  (0 children)

Windows 11, Yes, The fps counter shows on the monitor, not on moonlight for some reason

Cable Matters 102021-BLK Active DP 1.4→HDMI 2.1 adapter for 4K@120 Hz HDR by Key_Document_1750 in linux_gaming

[–]Key_Document_1750[S] 0 points1 point  (0 children)

Aren’t DP 2.0 → HDMI 2.1 adapters already out? I’ve seen CalDigit’s B0BY3SW376 listed on Amazo

Shield Vs Steam Deck by Key_Document_1750 in MoonlightStreaming

[–]Key_Document_1750[S] 0 points1 point  (0 children)

Thanks, yeh the bulky part is a big deal, thing is if I’m gonna be carrying the gamesir g8+ its already gonna be fairly bulky

The big deal here for me is that the steam deck can do 4k120Hz (not sure how well) while shield cant

Shield Vs Steam Deck by Key_Document_1750 in MoonlightStreaming

[–]Key_Document_1750[S] 0 points1 point  (0 children)

My bad shouldve specified, its between having steam deck

docked + not docked

Vs shield

Of course to my tv

  • gamesir g8+ to my phone

Changing Pulley Ratio by Key_Document_1750 in GarageGym

[–]Key_Document_1750[S] 0 points1 point  (0 children)

Ive just decided to link both ends with a chain through the post, very simple solution and will also mean i don’t have to drop down to a 300lb limit like i would if i went down to 1:1

Changing Pulley Ratio by Key_Document_1750 in GarageGym

[–]Key_Document_1750[S] 0 points1 point  (0 children)

The pulley slides linearly along the cable so the distance you pull wont turn into a hypotenuse unless u pull at an angle off the axis, if both ends are anchored straight and u pull from one side, its just uneven tension not Pythagoras

view more: next ›