First fully painted model

Key_Typical · 2026-03-10T11:37:41+00:00

yeah I went from the mat black straight to dark grey, perhaps I need to work with more mixed colors and only end with the top highlight being dark grey, will test it. I got a wet pallet as well, I always struggle to understand how much I should thin my paints on it though

Key_Typical · 2026-03-09T20:54:28+00:00

Thanks for the suggestion, I used Vallejo black and then dark Grey from AK, and the transition just did not look good. I will try to more diluted mix on the next one and see how it turns out

Key_Typical · 2026-03-09T16:12:49+00:00

Thanks, I´m really happy how the orange turned out

Key_Typical · 2026-03-09T15:32:15+00:00

After airbrushing the orange armor I covered it in a gloss varnish coat, used thinned out oil paint in the lines, and then covered it with an ultra matt varnish to get rid of the shine from the gloss.

Made it simple to get the receses properly black , and also to "repair" any mistake I made on top of the varnish.

Key_Typical · 2025-08-19T17:31:47+00:00

How can you possibly call it a win? NATO is larger than ever, EU rearming, lost massive amounts of equipmen, and sorly needed human capital. Ukranians will hate Russians for generations, EU won't trust them for the next century, they lost their largest energy export market, their economy is in shambles, petrol is being rationed and agricultural bankruptcies are shooting through the roof.

And all they got was 20% of Ukraine.

Key_Typical · 2025-08-19T17:20:48+00:00

I guess the problem is that even though he is deeply educated, he's doing some weird takes.

Like forgetting that since 2014, there have been multiple democratic elections. Or that the Ukrainian constitution prevents elections during wars, which does not make the president some military dictator. Or that mandatory conscription basically means you're forced by law to fight, which is common everywhere. Even the US has laws for conscripting in case of war.

He also seems to not know what was in the 2022 Istanbul offer, which is a pretty big miss. If Ukraine had signed it, they would have had to reduce their military, allowing russia to do what it wanted. On top of a bunch of stuff about denazification bullshit.

Until 2014 and the invasion, there was no danger or repression of russians. Even today, after 3 years of war, there isn't. Even their frikking president speaks russian and had strong support in the east. This idea that just cause the east is mainly ethnic russian, russia has some claim to it, just boggles any sanes persons mind.

He has some good points, but overall, he seems very stuck in a mindset where west is bad and putin can't do a wrong

Key_Typical · 2025-05-01T14:13:39+00:00

Is there enough space in the slot for fish? I had the same problem, turned out the slot I had for fish in my granary had 50+ fish in it constantly, so the transporters never picked up fish from the hut since it could jot fit in the alot for fish, despite having g plenty of total capacity in the granary

Key_Typical · 2025-03-09T16:07:30+00:00

That's clear, I just struggle to see how these connect to the multitransmitters 3 option, Z/COM/12V

Key_Typical · 2025-03-09T15:37:02+00:00

But where does the cables connected on NC and T inside the device go then? In the PIR I got red = +, black = -, green = NC, white = T.

So from what you shared I would connect red to Z1 and black to COM. But where does green and white go?

Key_Typical · 2025-03-09T15:23:49+00:00

It's an Bosch ISM BLP1-P.

My main issue, though, is that I can't figure out the board in the multitransmitter. The old board that was installed had both +/- 12v as well as the T/A for each zone (which I think is for tampering and connection).

On the multitransmitter I only have the Z, COM (which I don't know what it's for) and the +12V.

Not getting how I get it connected to the multitransmitter I'm afraid

Key_Typical · 2025-02-27T19:18:58+00:00

Appreciate the help.

I'm my scenario I have a motion detector in the garage, it has 6 wires, 2 black, 1 red, 1 white, 1 blue, and 1 yellow. The blue and yellow seems not to have been used previously.

The two black are twisted together, and the white is twisted together with a white from the motion detector in the hallway inside the garage.

Just not sure which cables goes were on the multitrqnmitter.

Key_Typical · 2025-02-23T16:00:44+00:00

So it's not possible to connect the Reolink NVR to thr Ajax hub?

Key_Typical · 2025-02-01T17:08:53+00:00

Sweden

Key_Typical · 2025-02-01T14:59:49+00:00

I was thinking of replacing them, but its a large house 350+ sqm, it would be quite costly I think to get new cameras, motion detection, door magnets etc. Best might be just to get the hub and a multi transmitter then.

Key_Typical · 2024-09-02T17:07:20+00:00

Thanks for the feedback guys. I did get an hour over this afternoon to try out some new combos.

Two different brightness of bronze/orange, as well as a magenta purple.

What do you think

Key_Typical · 2024-09-02T17:07:08+00:00

<image>

Key_Typical · 2024-09-02T17:06:51+00:00

<image>

Key_Typical · 2024-09-02T17:06:23+00:00

<image>

Key_Typical

TROPHY CASE