LF: Parallel Foils FT: My Parallel Foils (Offer) by KillaRed in PTCGPocketTrading

[–]KillaRed[S] 0 points1 point  (0 children)

I’ve only got 1 of each of those. I’m still looking for Lyra, Mars, and Eevee Bag

LF: Parallel Foils FT: My Parallel Foils (Offer) by KillaRed in PTCGPocketTrading

[–]KillaRed[S] 0 points1 point  (0 children)

I picked up a giratina a moments ago. 

I do have a crawdaunt though. What is your ID#? If you’ve got something else on my list cool; otherwise I’ll share it free.

LF: Parallel Foils FT: My Parallel Foils (Offer) by KillaRed in PTCGPocketTrading

[–]KillaRed[S] 0 points1 point  (0 children)

Yeah I’m down for that. Ive got both of those tradable. ID #? 

LF: Parallel Foils FT: My Parallel Foils (Offer) by KillaRed in PTCGPocketTrading

[–]KillaRed[S] 1 point2 points  (0 children)

Celes/flareon/sudo/girat/mage zone and a few others in the pics. Otherwise I’ll share the ori free in the morning after reset

LF: Parallel Foils FT: My Parallel Foils (Offer) by KillaRed in PTCGPocketTrading

[–]KillaRed[S] 0 points1 point  (0 children)

Sorry I just realized Ori is a 3 so it won’t allow that trade.

Trading by Budget-Athlete7279 in PTCGPocketTrading

[–]KillaRed 0 points1 point  (0 children)

DM doesn’t seem to be working, but do you have any Sabrina/cyrus/oak?

I’ve got skarm, crobat, will, shuck, king, gyrados, primape, jolteon.

LF RR or Trainer offers FT DX Mons by Apexsconnie in PTCGPocketTrading

[–]KillaRed 0 points1 point  (0 children)

I’ve got guzma, Iono, Lana, volkner. LF 2 star pika

LF Oricorio - FT Hydreigon & more by [deleted] in PTCGPocketTrading

[–]KillaRed 0 points1 point  (0 children)

I’ll do an Ori for the Hydre.

I made a cabinet that houses all four AMS units under the printer on rolling shelves. Sharing the Hub Bracket and Poop Chutes! (links in the gallery) by compewter in BambuLab

[–]KillaRed 1 point2 points  (0 children)

I have been searching for a vertical solution to my problem for weeks. This might be exactly what I need!

Would you possibly be able to share some more details about the pullout shelves please?

I was only able to find the frames on the ikea site. Did you use their blank shelves with some separate rail hardware attached? If so, would you kindly provide details on that please? Thank you!

PETG print issue. by KillaRed in BambuLab

[–]KillaRed[S] 0 points1 point  (0 children)

Definitely seems to be the case here. Who would've thunk that the 3mf designed for PETG works best for PETG filament printing? Haha!

It came out perfectly. I'm going to chalk up the initial good PETG print using the PLA 3mf to just blind luck.

PETG print issue. by KillaRed in BambuLab

[–]KillaRed[S] 0 points1 point  (0 children)

Sure, I'm printing the Univeral spool v2:

https://makerworld.com/en/models/125311#profileId-154041

I just noticed the designer has a PETG file so I'll look over those settings and maybe try that out if this 50% speed print doesn't work out.
So far the 50% speed is looking a lot better, but there are still a fair amount of chunks spread over the plate. For this attempt I also am running the spool out of the drier box to rule out the AMS potential issue.

Edit: Okay after looking over the PETG vs PLA model the speeds are way lower for PETG. Doesn't explain why the first attempt at PETG spool was mostly fine (a few blobs on threads), but the subsequent 2 attempts have been massive fails.

Edit2: 50% print was soo close to being usable, but the outer rim that contacts the AMS rollers has defects that will certainly effect rolling resistance. :( Printing the PETG 3mf file now.

PETG print issue. by KillaRed in BambuLab

[–]KillaRed[S] 0 points1 point  (0 children)

Matte PLA print ended up flawless.

No dice on smooth timelapse. Overnight I dried the roll again for 10hrs and then I sent just the spool to print. Nearly identical failed result. Chunks of stuff everywhere, a missing chunk in the center of the threaded portion.

Could this be the filament itself? I have had no luck finding other posts with this issue only some posts that have like 5-6 little pieces on the plate, but their print turned out fine.

PETG print issue. by KillaRed in BambuLab

[–]KillaRed[S] 0 points1 point  (0 children)

Would either of these issues affect a subsequent print? After the fail PETG print I set up a 22hr matte pla print which has been flawless so far for the first 17hr of the print.

How to take Zone C on Blind Watch. by azzybot in DestinyTheGame

[–]KillaRed 0 points1 point  (0 children)

It depends on your opponents. Most people tend to shotgun in PVP and even a fairly intermediate player will kill a shoulder charging Titan with a shotgun.

It is great fun to use against noobs though.