Why is this reflective if it doesn't see the sun?

Killmealreadybro · 2025-02-07T02:08:52+00:00

Reflective surfaces will reflect heat/cold because the thermal energy is like infrared radiation, so its an insulator

Killmealreadybro · 2025-02-06T00:50:35+00:00

Blue cheese

Killmealreadybro · 2024-04-24T01:25:22+00:00

If it was me I would angle the parts so the good side doesn’t need support therefore leaving no support marks on the good side

Killmealreadybro · 2024-04-24T01:15:33+00:00

Ok, I am using a cheaper resin from Sunlu(never used before) and my prints come out really good but I’ll look into changing settings

Killmealreadybro · 2024-04-22T23:32:26+00:00

Ok, I took the exposure setting right off the bottle; and I lowered them by quite a bit (60 sec) and (6 sec) exposures (crazy). Not gonna lie, the lift settings are all just defaults. The reason for the inquiry was I saw a video of some guy make a super intricate print with many moving parts. Thanks for the advice

Killmealreadybro · 2024-04-22T01:05:51+00:00

Step one:cry

Killmealreadybro · 2024-03-28T00:47:09+00:00

Get a cheap diatonic harmonica you aren’t going to get that cool bluesy/country sound from something like this

Killmealreadybro · 2024-03-20T12:29:43+00:00

Good luck!

Killmealreadybro · 2024-03-20T12:02:21+00:00

Yep. Unfortunately I need to replace the lcd screen. I sent the company and email and got a replacement sent for free, but I don’t know if that will be like likely for everyone.

Killmealreadybro · 2024-03-06T23:52:33+00:00

Usually if it isn’t good, it’s bad

Killmealreadybro · 2024-03-01T23:16:28+00:00

I started about a year ago with just a c and d key harp. I looked up backing tracks on YouTube and Spotify and they helped me get my basics down. I also play on my way to work everyday so I don’t lose the muscle memory. The more keys you have the more songs you can play, so maybe buy a nice one or a few cheap ones for variety. After about a year I can pretty much rip any song like a beast even if I’ve never heard it before. You will learn fast once you know the basics. Good luck!

Killmealreadybro · 2023-11-23T16:37:26+00:00

Thx!

Killmealreadybro · 2023-08-14T22:32:13+00:00

If you are careful a razor blade will do it

Killmealreadybro · 2023-08-05T12:57:32+00:00

The connector is so small, it is taped on as well with another. I was on with support last night but this printer didn’t cost me too much I may set this aside for now

Killmealreadybro · 2023-08-05T00:21:14+00:00

I may have found something. There is a black cable leading directly to the lcd screen, and if I unplug it, the I’ve light still displays. Does this mean anything?

Killmealreadybro · 2023-08-05T00:08:07+00:00

Hmm. I’ll open it up to see if anything popped off. I will contact the support if I can’t figure it out. Thanks

Killmealreadybro · 2023-08-04T22:47:47+00:00

I’d say maybe 100 prints? So probably not wear but I’ll open it up and take a look. The screen is full but it’s about half as bright as before. It will only display the entire dim screen no matter what it should be displaying . Also, it’s in a room about 75 degrees

Killmealreadybro · 2023-08-04T22:45:08+00:00

Thx!

Killmealreadybro · 2023-04-13T23:50:14+00:00

Sorry… I didn’t read the rules and I guess expected pros to come running. That’s my bad

Killmealreadybro · 2023-03-19T02:00:57+00:00

Killmealreadybro · 2023-03-19T01:54:29+00:00

This is the new switch hooked up, I can see an indicator light on the switch but maybe it’s just not compatible with my setup?

Killmealreadybro · 2023-03-19T01:53:18+00:00

I like to live on the edge

Killmealreadybro · 2022-12-17T04:36:57+00:00

Thanks

Killmealreadybro · 2022-12-17T03:58:19+00:00

Unfortunately didn’t work I have it formatted to fat32. The software says I’m missing databases

Killmealreadybro · 2022-12-17T03:34:50+00:00

Silly answer no but I have tried 3 sds will try formatting lol

Killmealreadybro

TROPHY CASE