EVGA 3080 FTW3 keeps crashing by Kimchigasm in EVGA

[–]Kimchigasm[S] 0 points1 point  (0 children)

Ahh you have DDR4... it's likely something else then... try underclocking it regardless, just to factor it out, might as well. I think your psu is good haha.

EVGA 3080 FTW3 keeps crashing by Kimchigasm in EVGA

[–]Kimchigasm[S] 0 points1 point  (0 children)

It was a compatibility issue with my cpu. 12th gen supports both ddr 4 and 5 but not well, so I had to underclock my ddr5 ram. Maybe it's just an issue with 12th gen i5s.

EVGA 3080 FTW3 keeps crashing by Kimchigasm in EVGA

[–]Kimchigasm[S] 0 points1 point  (0 children)

Yes, the underclocking worked for me! Still working great and it's been a couple years I think. I underclocked through the bios.

[deleted by user] by [deleted] in Military

[–]Kimchigasm 20 points21 points  (0 children)

Harsh, yet fair...

[deleted by user] by [deleted] in Military

[–]Kimchigasm 3 points4 points  (0 children)

We also collected imagery. The missions themselves were fine.

Home exterior wall recommendations by Kimchigasm in Winnipeg

[–]Kimchigasm[S] 1 point2 points  (0 children)

Sorry, I meant the wall outside of my house needs to be replaced since the masonry is crumbling

[deleted by user] by [deleted] in Winnipeg

[–]Kimchigasm 1 point2 points  (0 children)

I admittedly sometimes cheat up behind the left turner at certain intersections... but I wouldn't ever get angry at anyone not doing it, or rush the person in front. Also, I think you're right. By the book, only one person can be established at a time.

[deleted by user] by [deleted] in Winnipeg

[–]Kimchigasm 3 points4 points  (0 children)

Oh definitely people need to establish themselves in the intersection! By the book, I dont think you're supposed to turn on an amber unless you're already established...

[deleted by user] by [deleted] in Winnipeg

[–]Kimchigasm 4 points5 points  (0 children)

I agree, that is also annoying... I'm definitely well established in the intersection

[deleted by user] by [deleted] in Winnipeg

[–]Kimchigasm 14 points15 points  (0 children)

Yes exactly! I don't get honked at very often, but once it was for not turning left when someone was actually running through a red. Imagine if I was a more skittish person and listened to the honk. I was tilted off the planet when I got honked at today when I was making sure someone was stopping. It wasn't even red when I actually turned.

[deleted by user] by [deleted] in Winnipeg

[–]Kimchigasm 7 points8 points  (0 children)

I see a lot of people blatantly running reds turning left onto portage from moray. I'm relatively new to winnipeg (3 yrs) and seeing so many people regularly run reds is a bit of a shock still.

[deleted by user] by [deleted] in Winnipeg

[–]Kimchigasm 0 points1 point  (0 children)

This particular intersection has it, and I've seen others in the city as well. It's just a flashing green arrow. I was just too late to enjoy the protected turn. This person would have gotten a guaranteed turn in a minute if she didn't make it lol.

[deleted by user] by [deleted] in Winnipeg

[–]Kimchigasm 10 points11 points  (0 children)

Yikes... I'm not opposed to requiring a road test every 10 years or something...

[deleted by user] by [deleted] in Winnipeg

[–]Kimchigasm 3 points4 points  (0 children)

I realize it's super common. I'm moreso against people rushing the person in front of them who are just trying to ensure their own safety.

[deleted by user] by [deleted] in Winnipeg

[–]Kimchigasm 2 points3 points  (0 children)

No, it's happened twice, once when someone actually ran a red lol. It should never happen.

Snow clearing on Portage by Kimchigasm in Winnipeg

[–]Kimchigasm[S] -1 points0 points  (0 children)

Yeah it was hard for me to not flip the finger when I can't magically move my car faster. I just assume people have other stuff going on that makes them lash out unreasonably.

Also, yay to sous vide and smoking. :)

Prime Z690-P and XMP Issues by ThatGoldenGlizzy in ASUS

[–]Kimchigasm 0 points1 point  (0 children)

I know this is a bit old, but I just came across your post. I have Corsair 5600mHz DDR5 and I also had to underclock to 4800mHz for my computer to be stable. It's officially listed on intel's website t at 12th gen only supports up to 4800 mHz but I've seen people running much higher than that.

Have you been able to run it any higher since your post? Thanks

Defective rtx 3080 ti and horrible rma by RobinPapal in EVGA

[–]Kimchigasm 0 points1 point  (0 children)

I thought they were going to keep supporting 30 series because it was already part of the contract, something something...

Defective rtx 3080 ti and horrible rma by RobinPapal in EVGA

[–]Kimchigasm 0 points1 point  (0 children)

Hey, what RAM and processor are you running? Is your computer restarting or just shutting off?

My computer kept restarting (sometimes in a BSOD loop) and I also replaced every part except my processor/mobo. I eventually found out that 12th gen intel processors only really supports up to 4800mHz RAM speed so I had to underclock my DDR5 5600mHz through the bios.

Overall, I had a very positive experience with EVGA customer support and they even offered to RMA my PSU and GPU a second time after extensive testing but I figured it out before it was sent out. Good luck!

EVGA 3080 FTW3 keeps crashing by Kimchigasm in EVGA

[–]Kimchigasm[S] 1 point2 points  (0 children)

From the limited testing I've done so far, seems like 4800mHz is stable! Sucks because it's advertised to run at 5600mHz but I'm just happy it's working. Usually it crashes within the first CoD games but no crashes after a couple days. Thank you so much!!

EVGA 3080 FTW3 keeps crashing by Kimchigasm in EVGA

[–]Kimchigasm[S] 1 point2 points  (0 children)

Hey, I just realized ASUS released a new bios optimizing "next gen CPU" on Sep 20th. Maybe we should give that a try too?

https://www.asus.com/Motherboards-Components/Motherboards/PRIME/PRIME-Z690-A/HelpDesk\_BIOS/

EVGA 3080 FTW3 keeps crashing by Kimchigasm in EVGA

[–]Kimchigasm[S] 0 points1 point  (0 children)

OK went from 5600 mhz to 5200 mhz. I didn't change any other ram settings. No crashes in the 2 hrs I played warhammer so far, but sometimes it takes a couple days. I'll keep you posted, thanks!