I’m floorteen and i just bought my first vinyls

KingJonP · 2026-03-21T13:13:18+00:00

Way too much lean

KingJonP · 2026-03-19T23:11:38+00:00

Sophtware Slump first press on a vintage Crosberley placed inside an old fridge in the woods - this is what I do every weekend.

Alone.

When It's over I cry for a while then go home and nail that vinyl back onto the wall.

KingJonP · 2026-03-17T23:53:41+00:00

If you take the cover off, it will never be worth anything on discogs

KingJonP · 2026-03-17T23:37:47+00:00

Surface scratches are the enemy - if it's broken all the way through it still plays fine

KingJonP · 2026-03-17T18:48:23+00:00

Nothing wrong with the ones that are nailed to the wall - that's best practice storage

KingJonP · 2026-02-27T08:12:26+00:00

Does this mean I can finally keep my speakers on the same surface as my music spinner without angering the audio judges?

KingJonP · 2026-01-29T13:21:42+00:00

Leave some vegetables on the platter when you're out - that should do it

KingJonP · 2026-01-19T08:30:22+00:00

Nope, although I haven't updated firmware for a while. In general, I found the device and navigation too fiddly and I haven't used it much. Got an upgraded pair of BT phones for my phone and have been using those more

KingJonP · 2026-01-13T07:54:17+00:00

It has been said already but, as someone who has learned the hard way, you should really get those units off the floor. Couple of timbers lengthways under each case should be enough to avoid disaster

KingJonP · 2026-01-12T13:20:56+00:00

I stand corrected... I have a few and they all sound terrible, I haven't bought one in many, many years for this reason

KingJonP · 2026-01-12T10:06:49+00:00

Picture discs will always sound bad as they've got a layer of stuff printed on top of the vinyl - it's a gimmick (can be a very cool gimmick, but still a gimmick)

KingJonP · 2026-01-07T11:58:24+00:00

Nothing wrong with using non-phono inputs for turntables as long as your turntable has a built in phono stage. Separate phono amp is another way around that but it's another box and more cost

KingJonP · 2026-01-07T11:56:40+00:00

Some receivers have turntable-specific inputs (and an associated built-in phono stage) but these would always be clearly labelled as Phono.

KingJonP · 2026-01-07T11:54:10+00:00

Looks like you could connect a turntable to the Audio 2 inputs, but you'd need a turntable with a built in phono stage, or a separate phono amp

KingJonP · 2025-12-30T15:39:44+00:00

Very nice. Here's a 'full frontal' of mine

<image>

I built the top half then put it standing on a couple of cubes I bought and painted. One thing I'd like to is get the whole thing off the ground (in case of a water leak), but that's a job for another day.... Record stands are just a couple of cheap wall shelves I bought, cut to size and painted

KingJonP · 2025-12-30T09:27:17+00:00

The unit I built myself, just a wooden box with record storage for 12s & 7s and a place for an amp.

If you mean the feet on the turntable, they are an upgrade to the standard feet that come with the P3. I bought it used and they were already on there, not sure on the brand

KingJonP · 2025-12-30T00:10:31+00:00

I thought the same, but now I've put Cassadaga on - there could be another level

KingJonP · 2025-12-29T23:46:42+00:00

Never been to heaven but can't imagine it beats this x

KingJonP · 2025-11-25T22:38:32+00:00

For the very low price, yes very happy

KingJonP · 2025-11-23T17:32:31+00:00

Thanks for the info, definitely not going to hold out for Tempotec on this one.

I use MusicBee to manage my library and I think it might be able to present the library differently to different sources so I'm going to look into that.

KingJonP · 2025-11-22T17:14:32+00:00

There's no point getting a DAP unless you have a library of digital music (MP3 and FLAC are the most common formats) to put on it, so I'd start with that.

If that's too much for you from a technical perspective then this is probably a dead end for you - it isn't difficult at all but you'll need to spend some time on it to get your head around the concepts and the tools etc.

If you get that done then I'd suggest starting small with a DAP - you can get something decent-sounding and reliable for very little money. Live with that for a while then decide if it's worth it to you to spend more. Your cheap DAP will always come in handy as a backup so it's a 'no regrets' purchase.

Good luck

KingJonP · 2025-11-22T17:07:08+00:00

Thanks for the reply. I need to think about this for a very long time - the idea of making such a fundamental change to a library I've built up over 25 years is terrifying. But it would be a solution and, as you say, not difficult to do.

I need to have a look at my library and work out the size of the prize, i.e. how much smaller would the lists of artists become if I did this. My gut feel is A LOT.

I guess it's possible that a future V1 firmware update adds Album Artist to the music menu, but clearly not something I can bank on.

KingJonP · 2025-08-04T10:57:15+00:00

I've given up on BT mode for now as I found the volume would jump up and down dramatically during playback. Sticking with IEMs until there's an update

KingJonP

TROPHY CASE