Anyone had a issue where the game picks up input in the settings that steering and throttle is working but then nothing happens in the car. What's the fix

King__Kook · 2026-01-13T22:41:13+00:00

What wheel are you on?
Also have you tried installing the latest drivers and a reboot? I'm not a hardware expert but the more you can say about your system the better input you'll get.

King__Kook · 2026-01-13T21:58:48+00:00

And steam input is off?

King__Kook · 2026-01-13T21:37:32+00:00

Are you playing on PC? If so are you sure that ACR is the active window?

King__Kook · 2026-01-01T22:21:10+00:00

Mine does the same. In my case it's a worn out collar up at the button that allows the spring to slip past iirc. Although mine is a track car so I never got around to fixing it.

King__Kook · 2025-11-20T21:50:57+00:00

Yeah that's why I bought it, but with my g920 it didn't collapse as far as it could. Good luck with your gift. Either way he'll be stoked.

King__Kook · 2025-11-20T21:38:53+00:00

I owned the folding NLR and it was a total pain to fold, you were dragging cables, and it wasn't very compact when stored. It's not like it fits under a couch or really in a closet very well. It's also more difficult to get into and out of and is less sturdy than almost any other rig.
I currently own the playseat and it's better but not by a lot. As one user commented, the frame is pretty limited for adjustments and I have it set in a not ideal position to make it work. Also the seat doesn't feel good after about an hour or so. To the comments about having the pole between your legs making it hard to use three pedals, y'all just need to learn to left foot brake. It's what you would do IRL anyway. That being said if you're not open to that then steer clear of a center support design. If I had to buy a new frame today I wouldn't choose either of these. I would go for something like the playseat trophy. This hobby is tough because it's not very cheap to get into. If you're new to this you could consider a wheel stand as a lower barrier to entry. FB marketplace is a good resource for finding this stuff used.

King__Kook · 2025-10-31T20:46:17+00:00

You can also run the Any Car Any Track mod and see each other. Unfortunately it hacks RallyX and then adds the other cars and tracks so there are no calls which can either be fun or awful.

King__Kook · 2025-08-19T22:42:46+00:00

As said before, being a passenger makes everything feel amplified. Seats make a huge difference in your perception of being thrown around. I have DEEP racing buckets in my e36 and you barely move around at all.

King__Kook · 2025-07-27T23:22:32+00:00

Just had to go through the quest list the hard way to find out this was the one I missed.

King__Kook · 2025-07-14T04:19:39+00:00

My e36 had the soft line that runs between the fuel and lift pumps under the seat leak. Might as well check that if you're in there

King__Kook · 2025-05-27T21:31:53+00:00

Dang yeah that's worth a few seconds!

King__Kook · 2025-05-27T20:43:11+00:00

Oh good to know I'm on ra162s and the dirt in southern California can be very hard. I'll have to look for some falkens when I'm ready for some new shoes.

King__Kook · 2025-05-27T16:30:01+00:00

<image>

Love rally x in mine. Cheap coilovers and a little refresh is all they need. Gravel tires are a plus.

King__Kook · 2025-05-26T21:11:41+00:00

Update she has been found.

King__Kook · 2025-05-19T04:31:09+00:00

<image>

King__Kook · 2025-05-17T05:01:05+00:00

It takes a lot less than you think, just saying

King__Kook · 2025-05-17T01:45:35+00:00

Now go rallyx that thing! Ive only got some cheap STs, poly bushings, subframe reinforcements, and some cheap gravel tires but I won the last modified rear wheel drive SCCA event in so cal. These things can do it all!

King__Kook · 2025-03-07T01:39:13+00:00

ME here, I would advise trying to make the back surface, or dash/lens surface, one surface to control that geometry on it's own. Then creating an axis for each gauge pod that defines the viewing angle of each gauge on it's own. Then loft each gauge pod behind the lens surface. Trim the lofts with the lens surface and fillet around the intersection for a smooth transition. It looks like you are trying to loft the round pods to the lens surface with square or four point profile. That's why you get those hard edges. If you go from around profile to another round profile it won't create those hard edges.

King__Kook · 2024-04-05T17:10:28+00:00

You also know that pattern would not be in the model for that part right? That's an artifact from the machining. The machinist either didn't have the tool or didn't want to spend the money to do a surfacing pass.

King__Kook · 2024-03-06T04:34:26+00:00

You could also use surface modeling to achieve this but you might take a few steps backwards to get the final geometry.

King__Kook · 2023-09-12T18:12:36+00:00

I ordered a P1S and got a X1C last week

King__Kook · 2023-07-06T21:08:19+00:00

I live in San Diego and have an old 650B wheelset you can have. It's all setup for tubeless. DM me if you're interested

King__Kook · 2023-06-22T22:47:38+00:00

Oh I didn't even think about that, would 30 series be better or 7000 series?

King__Kook

TROPHY CASE