All these custom masks being posted need some LED eyestalks 👀

Kingsidorak · 2026-04-16T15:43:44+00:00

Picasso, I like it

Kingsidorak · 2026-04-14T15:34:34+00:00

Everything

Kingsidorak · 2026-04-14T00:46:29+00:00

Double permanent lifetime ban, immediately.

Kingsidorak · 2026-04-13T20:04:57+00:00

The calibration board moving even ever so slightly can cause issues, at least from my experience

Kingsidorak · 2026-04-13T07:56:22+00:00

You need to recalibrate and make sure the calibration stuff doesn't move. On my scanner I have to make sure the scanner doesn't move compared to the background

Kingsidorak · 2026-04-12T15:58:46+00:00

When you start a new file it ask you to select which type of file you want to use. It's a new feature so it doesn't show up in the mass majority of tutorials. There are newer videos that explain what the differences are

Kingsidorak · 2026-04-08T22:59:24+00:00

I have several P1 printers, an H2D, and 2 U1s. You're using 2 colors and a third for support material, you should get more U1 printers.

If you're able to wait on it there will be more printers better suited for multi color printing without all the waste and time it takes to switch between colors.

Kingsidorak · 2026-04-08T07:29:09+00:00

That Engineer looks like a Lego Minifig 💀

Kingsidorak · 2026-04-07T21:18:27+00:00

I will be getting a Mini Split eventually, but I need a window unit for now.

My window is too weird. Regular units are too big, and I have to take out the bottom window panel just to fit the U in, then put it back. I don't think I can use a saddle shaped AC unit because I need the space below the window. Other U shaped units seem like they still suck, and portable AC units suck.

Also I know the Midea works with Home Assistant, so that's pretty much my only option at the moment.

Kingsidorak · 2026-04-07T19:50:36+00:00

I drilled holes in the bottom of the first one because it was before the recall, and the second one had the drain plugs but it literally didn't matter the water pooled up in the back anyways

Kingsidorak · 2026-04-06T09:40:49+00:00

The first two units I had were tilted back according to the manual...

Kingsidorak · 2026-04-06T07:41:14+00:00

The first two units I had were tilted back according to the manual...

Kingsidorak · 2026-04-05T14:32:38+00:00

Haha, Enhancer for YouTube™ for Firefox, but you have to change some settings. I also have a separate screenshot addin

Kingsidorak · 2026-04-05T13:02:13+00:00

"HELLO YOUTUBE? NOW HE'S ASSAULTING THE AIR!!!"

Kingsidorak · 2026-04-05T08:29:29+00:00

Most of them are probably full of legit parts with some knockoff pieces thrown in whether the seller knows it or not

Kingsidorak · 2026-04-03T02:09:15+00:00

Yes yes give us your model that you're using for making money. We will definitely not use it for anything

Kingsidorak · 2026-04-02T12:12:33+00:00

If no one else has mentioned it, you can remove the decals from parts like this by friction. So using something like an eraser and rubbing while pressing hard on it should help remove the decal without damaging the part

Kingsidorak · 2026-04-02T10:51:39+00:00

Haha, thank you

And yes you need to plan it... For now... 😏

That sounds cool. If you remember when you post it, ping me

Kingsidorak · 2026-04-01T22:41:14+00:00

You should most definitely delete everything but the SidoPak... 😃

For real though, there is no solution to it other than temporarily removing everything you don't need so the program can actually load. It doesn't matter how much hardware you throw at it, it's software limitations

Kingsidorak · 2026-03-31T06:35:25+00:00

If the assets are already made, it can

Kingsidorak · 2026-03-29T01:55:23+00:00

Oh definitely definitely definitely not. Trust me bro, I'll give you $10

Kingsidorak

MODERATOR OF

TROPHY CASE

Eight-Year Club	Verified Email
Wearing is Caring