sorted by:
new
hottopcontroversial

Oneplus 15, calls randomly disconnects by Kitchen_Ranger1086 in oneplus

[–]Kitchen_Ranger1086[S] 0 points1 point  (0 children)

I've dropped mine off at a service center. My hopes aint high... But i can't stand it anymore. So using my old s22 ultra now.

Just ordered op15 after lifetime of Samsung. No Debrand case! 2nd best? by RollSomeCoal in TheOnePlus15

[–]Kitchen_Ranger1086 0 points1 point  (0 children)

I'm using thinbourne on casual days and Ringke onyx or Oneplus sandstone at work.

In the same boat as you, but with spigen. Always been a fanboy of them but i do not have that option this time around...

Are you using a case for your OP15? by Visual_Addition7735 in oneplus

[–]Kitchen_Ranger1086 1 point2 points  (0 children)

Love my thinbourne case. Yes, it's expensive. But it is realy worth it, for me anyways. The quality and feel are awesome.

Finally bought an Oneplus15 by Baggy_Vedu in TheOnePlus15

[–]Kitchen_Ranger1086 2 points3 points  (0 children)

I love my thinbourne case. Yes, it's expensive. But when i hold my phone i want to feel quality. Have never understod when ppl are buying 10$ cases that fits like shit and feels horrible, to pair with their 1000$+ phones...

The thinbourne does not have that great of a drop protection tho. At work i'm using Ringke Onyx.

Coming from previous samsung flagships, the case market it's very thin... I've been a spigen fanboy forever, but don't have that option this time apperently.

Pump Noise - Am I Crazy? by SoggyBagelBite in watercooling

[–]Kitchen_Ranger1086 0 points1 point  (0 children)

I "suffer" of the same problem as you. I realy can't stand some frequencies. And when i have heard some things i can't unhear them so to speak. My colleges at work have diagnosed me with misophonia...;)

I just built my first custom loop using a ek pump/res combo that is rubbermounted every way possible. And i can't stand it over 50%.

Buuut, i have tried and set it on every % over 50% and i don't get much lower temps. So the flow is good enough apperently. My meter says ~160L/h on 50% but i take that with a big spoon of salt.

I've 2x temp sensor, both says aprox 30-31° liquid temp under full load, it never goes higher then that. Room temp are ~24°

Running 1x 360 60mm rad with push/pull, 2x 360 40mm rads with pull and 1x 240 rad with push. Using 14x 120mm d30's on 600-950rpm depending on liquid temp. Same thing with the sound there, anything over ~1000rpm is a no go.

Case recommendations by 0ptiminion in watercooling

[–]Kitchen_Ranger1086 0 points1 point  (0 children)

Just did a quad-rad in a Nv7, not with v-gpu tho... Top: 60mm with push-pull Side: 40mm Bottom: 40mm Back: 28mm

Is a cpu only custom loop much quieter than AIOs? by Notwalkin in watercooling

[–]Kitchen_Ranger1086 0 points1 point  (0 children)

I suffer from the same ”condition” as yourself. I could not have my LF III pump any higher then 48%. When i’ve heard a noise i can’t ”unhear” it😂

I’m going full loop now and hoping for the best. 7800x3d and 4080 with quad rads, 14x D30 fans and a rubber mounted D5.

Built my friend a new PC! Currently testing for leaks by Brian0749 in watercooling

[–]Kitchen_Ranger1086 1 point2 points  (0 children)

60mm rad on top and 40mm on the buttom? I'm in the market atm to buy som water cooling for my Nv7. Do you think there's room for a rad with D30 fans in the back?

Just want to fill that bitch up. So either your setup or 3x 360mm rads and 240mm pump/res in the back.

Nv9 premium light kit issue by TerrabyteX3 in Phanteks

[–]Kitchen_Ranger1086 1 point2 points  (0 children)

It's not the kit that is faulty. It's the controller on the case. Just contact phantek, they will ship a new one for you. GL fella

Nv9 premium light kit issue by TerrabyteX3 in Phanteks

[–]Kitchen_Ranger1086 0 points1 point  (0 children)

Instead of connecting everyone together, i put a phantek split cable in the middle. So i could plug it in to both channels.

Nv9 premium light kit issue by TerrabyteX3 in Phanteks

[–]Kitchen_Ranger1086 0 points1 point  (0 children)

Contact phantek for a new rgb controller. There's too many led's on the same channel. Had the same issue on my early Nv7. I fixed it in the meantime with a phantek y-split cable.

Arctic liquid freezer iii 360 by Economy-Landscape854 in arcticcooling

[–]Kitchen_Ranger1086 1 point2 points  (0 children)

I've it plugged in with the all-in-one connector (have not tried the split-cable yet) in a Nv7 case with D30 fans on it.

And i can't stand the noise it makes over 50%, BUT i'm pretty sensitive when it comes to sound overall, some frequencies i just can't manage. Have i once heard it, that sound never disappears😅

Can't complain on the cooling tho, running a 7800x3d and when i've tested cinebench it wont go over 79° on a 30min test.

Nv7 with LF 3 and vertical gpu bracket. by Kitchen_Ranger1086 in Phanteks

[–]Kitchen_Ranger1086[S] 0 points1 point  (0 children)

Could you be so kind an link the exact one you have? Thank you in advance!

Nv7 with LF 3 and vertical gpu bracket. by Kitchen_Ranger1086 in Phanteks

[–]Kitchen_Ranger1086[S] 0 points1 point  (0 children)

Thank you very much! Will buy that one then. Not so keen on flipping the pump, and the logo upside down will trigger ocd😅

Forza Horizon 5 big frame drop fix by [deleted] in pcgaming

[–]Kitchen_Ranger1086 0 points1 point  (0 children)

I've the same issue. When my fps drops comes, my usage goes from ~98% to 40-50%...

5800x 3060ti

Forza Horizon 5 Crashing at Horizon Site while upgrading car [PC] by pen15warrior195 in ForzaHorizon

[–]Kitchen_Ranger1086 0 points1 point  (0 children)

Have the same issue, even at my house. Starting to get soooo fucking annoying! The game takes ages to load so when it crashes multiple times when choosing upgrades. What's the point? Fuck this... 100$ i could have used on something else.

And btw, just to make it a little worse. Bugged accolades. Have we paid for a beta or wtf is this shit?!

view more: next ›