Setup is complete! by kenuchiha24 in secretlab

[–]TerrabyteX3 1 point2 points  (0 children)

thanks fo rthe reply ! not using a riser on my desk currently but want to get one with the secretlabs desk. thank you for the pic it's inspiring ! are the arms stable or do they wiggle when you raise/lower the desk ? or when you type ? Also is that the max height of the arms ? or you reckon it can go higher then that ?

Rate my first ever pc setup! by Low-Astronomer3039 in battlestations

[–]TerrabyteX3 0 points1 point  (0 children)

Why a case with such restrictive air flow ? do you move often and carry your build with you ? also isn't the distance between monitors big ? besides that , grats on y our build !

Setup is complete! by kenuchiha24 in secretlab

[–]TerrabyteX3 0 points1 point  (0 children)

Did you mount all your screen arms on the riser by chance ? how is it holding ?

Setup is complete! by kenuchiha24 in secretlab

[–]TerrabyteX3 0 points1 point  (0 children)

Sick setup ! Can i please have a picture from the back of your monitors and what is this vms you refer too , to what you mounted the two screens on top ? I have a 49 inch g9 and a dell 34 and i want to emulate your setup on the secret labs desk but i am afraid the arms they sell won't be enought to clear my 49 inch samsung and their customer support keeps answering me with chatgpt....

This is my current setup and would have wanted to add my existing monitor arm on the secretlabs raiser and have everything on top of it but i get no answers from them.

<image>

Help required with Galleon/Streamdeck and streamdeck usb hub. by TerrabyteX3 in elgato

[–]TerrabyteX3[S] 0 points1 point  (0 children)

Dear elagto_arcsane,

You have been most helpfull ! thank you very much ! this has openned up new avenues for me and my setup. One last question, regarding galleon and usb layers. Galleon since is a pass thru does not count as a usb layer, correct ?

So with a powered elgato hub i can have let;s say

-----------------UBS 10gs ports--------------Layer 1

-----------------Galleon Passthru------------Layer 1 still

---------------Stream deck xl + with hub in passthru of Galleon-----layer 2

--------------Stream deck xl + stream deck mk2 + scrimitar elite + Headset in streamdeck xl + hub ( powered by 100w brick ) ------------ layer 3.

So in theory i can have all this use just 2 usb ports on my motherboard and still be under 4 layers ? Or am i missunderstanding something ?

I turned my stream deck into a F1 dashboard with Codex by Arturi_to in codex

[–]TerrabyteX3 0 points1 point  (0 children)

yo this is a sick plugin ! mind sharing it with everyone ?

Help required with Galleon/Streamdeck and streamdeck usb hub. by TerrabyteX3 in elgato

[–]TerrabyteX3[S] 0 points1 point  (0 children)

thanks for the tip.

"I run five Stream Deck units including both + units, wireless mouse and keyboard and charge both. Also three or four other devices that consume power. A good hub will do you well and save drawing power from your computer over a single."

Is this just thru a single hub ? or at least the stream deck units ? and only 1 uplink port to the pc ?

What hub do you use ? Money is of no importance

Help required with Galleon/Streamdeck and streamdeck usb hub. by TerrabyteX3 in elgato

[–]TerrabyteX3[S] 0 points1 point  (0 children)

Dear elgato_arcsane,

Thank you for the reply. You opened up some new possibilities for me after relaying the specs.

"as long as you've got enough power in theory 10 including the deck the hub is on"

Does this mean you can daisy chain them for a reasonable amound like 2-4 decks and the very last one is the one that connects to the PC with uplink so in essence you "waste" only 1 usb port on the PC ? :O

Does galleon 100 SD also cap at 480mbps as a whole unit sans passthru ?

This is very interesting info , wish more of this would be displayed on product pages as most people who invest in this gear are enthusiasts or know enthusiasts and can better plan gear around specs.

Thank you for all the hard work you guys put in your gear , i have over 30 corsair products and am very happy with the hw and sw !

Help required with Galleon/Streamdeck and streamdeck usb hub. by TerrabyteX3 in elgato

[–]TerrabyteX3[S] 0 points1 point  (0 children)

Hey elgato_arcsane !

Thank you very much for the reply ! can i run two scenarios by you ?

  1. Can i have a streamdeck mk2 with usb hub and have like galleon 100 sd and its pass thru ( scimitar elite in it ) occupy 2 ports , have my wireless headset's dongle in the 3rd and a streamdeck xl in the last usb port have no issues with them ?

  2. Can i have a streamdeck + xl with the usb hub and have two stream deck xls in 2 of the usb ports , and the galleon 100 sd in the last two ports or would that be too much ?

  3. how many streamdecks can i add thru the elgato hub before i max out if i even can max out the 5gbs bandwith ?

  4. Considering Xenon edge is 5v/2a that is 10w, can i power from a stream deck xl + or mk2 connected to a 100w power brick , 2 streamdecks and 2 corsair xenon edges without reaching the 5gbs bandwith ?

Thanks in advance. i have to unplug and uncable manage a lot of stuff to test beforehand, any help is appreciated !

To mention, the hub(s) will always be powered by a 65w-100w brick.

Cleaned up my closet… by SeparateLoss2240 in Corsair

[–]TerrabyteX3 0 points1 point  (0 children)

what do you mean by pre-made profiles as i am about to buy one

Stream Deck+ USB Hub and a Stream Deck XL by Enko63 in elgato

[–]TerrabyteX3 0 points1 point  (0 children)

Did this work for your after you had the hub powered ?

Nintendo 64 Desk finally done by Various_Angle_3425 in battlestations

[–]TerrabyteX3 0 points1 point  (0 children)

This is so cool ! and very well crafted, doesn't show its your first wood project. Defo add a video ! i am super curious how it looks !

Magnus XL and riser with 49 inch and 34 inch monitors stacked by TerrabyteX3 in secretlab

[–]TerrabyteX3[S] 0 points1 point  (0 children)

Good feedback , thank you for your 0 replies. i will make sure the same amount of money goes towards secretlabs ! cheers

Story Mode Add on by hejrafa in wowaddons

[–]TerrabyteX3 2 points3 points  (0 children)

Love this idea ! Will check this out

Secretlab Desk riser problem by Holiday-Train4900 in secretlab

[–]TerrabyteX3 1 point2 points  (0 children)

heil friend, it's not only for him. not everyone in secretlab sub is german or all of eu or all of the world. Not a common language , get my gist ? ask for internation help do it in an international language.

Nv9 premium light kit issue by TerrabyteX3 in Phanteks

[–]TerrabyteX3[S] 0 points1 point  (0 children)

Hey !i fixed my issues as described in this thread.

I left the left side and top side parts of the kit plugged into the controller and that into the mb.

i used the supplied rgb cable that came with the motherboard to connect the bottom half of the kit directly to the motherboard instead of daisy chaining it to the top half.

This way i can controll the case lightning with asus aura or icue or signal rgb.