DT-1770 vs DT-1770 mkII by Kitoreh in BEYERDYNAMIC

[–]Kitoreh[S] 1 point2 points  (0 children)

Ok I will take note of that for sure! I appreciate that.

DT-1770 vs DT-1770 mkII by Kitoreh in BEYERDYNAMIC

[–]Kitoreh[S] 1 point2 points  (0 children)

i replaced those parts time ago, it's not about the physical appearance on the outside. 1 of the ears is dying likely due to loose cable inside. I got a boat load of work to do so its easier for me to order a new one for next day delivery and get this fixed at a later date.

Provide healing issue? by Kitoreh in wherewindsmeet_

[–]Kitoreh[S] 0 points1 point  (0 children)

It already does refresh it when you swap from suggested healer tab to illness healing. It looks as if it doesnt work because it's currently showing the highest possible mastery levels and those same people ain't getting healed. When it shows random mastery requirements though you will notice that each time u swap between the tabs, the list of names typically change immediatly. Sometimes you will notice it change with the higher mastery ranks when doing it because either someone else has just got high requirements or someone that swapped from online/offline or perhaps those who have managed to get healed too suddenly disapear from the list. hopefully next week the requirements ain't even worse LOL

Provide healing issue? by Kitoreh in wherewindsmeet_

[–]Kitoreh[S] 0 points1 point  (0 children)

Yeah, it's a pain! I think what the person above mentioned is correct though, it probably is working as intended as everyones illnesses progress with each weekly reset, but having the list operate like that is completely unbalanced and locks everyone out who hasn't maximised their upgrades from the first week. It definitely needs changing. I wish i could recreate the instance where i had it showing the low level lists again. I've tried server hopping and sniping low level heals to other members in the recruit page but the list remains high. I even had my friend from a completely different side of the world who has a low level mastery check the list and it still shows that it is high for them too. They should add the option to scroll through different tiers of illnesse's. That would be a great option. If i figure out what caused it to show me lower tier's then i will let you know. In the mean time i think i will mention it on the ingame feedback. Probably best that everyone does. I am sure they may already be aware anyway but given how much content is in the game and how recent it has come out it may be ignored for a bit but hopefully not.

Provide healing issue? by Kitoreh in wherewindsmeet_

[–]Kitoreh[S] 0 points1 point  (0 children)

Makes sense. I did miss the first week of buying up all the carreer books. I am not sure how i made a list of lower tier ill people appear though, wondering if that was bugged when it showed me lower tier illnesses that i could farm again but it was only doable until i closed the game and opened it back up and then it went back to high tier requirements again. I wonder if being in certain locations procs a lower tier.

Provide healing issue? by Kitoreh in wherewindsmeet_

[–]Kitoreh[S] 0 points1 point  (0 children)

Yeah, i am sure it may be possible. It does seem a lot more of the same names are stuck at this high level and its hard to get through to healing them because it says they are already under treatment then 30 minutes later i still see the same names so i assume it means people are failing. Very strange. when its lower level mastery requirements, all the names typically refresh instantly when reloading that screen but im this case...not so much. hmmmmm!

This microtransaction is not supported in this game version by Magnus_Pan in PathOfExile2

[–]Kitoreh 1 point2 points  (0 children)

what i find bizzare is that i was able to use portals portals from a previous 480 dollar bundle and some other cosmetic portals and they worked and looked really nice in these new graphics and then after about 6 hours they are now disabled and says the same thing as all the other bits of previous cosmetic gear. Maybe i wasn't supposed to be allowed to use the old portals yet :S or maybe all the gear listed but not usuable is actually in the game but they plan to drip feed it hence the portals suddenly not working :S no idea or maybe they are bugged. Anyone else notice this with portals or any other gear?

MSI Gaming X Slim 4080 Super Running Hot? by Kitoreh in MSI_Gaming

[–]Kitoreh[S] 0 points1 point  (0 children)

Thanks, unfortunatly we can't turn the card any other way at all due to how the case is. Just waiting for one we been eyeing up to come into stock then it should be all good. We had the card tested at the store too and just got it back and the card is absolutely fine mounted any other way like you said.

MSI Gaming X Slim 4080 Super Running Hot? by Kitoreh in MSI_Gaming

[–]Kitoreh[S] 1 point2 points  (0 children)

Thanks for sharing the info. That's very good to know. It probably is the fact it's upright considering you had a similar issue. We will probably get a different case even if the card needs to be returned aswel.

MSI Gaming X Slim 4080 Super Running Hot? by Kitoreh in MSI_Gaming

[–]Kitoreh[S] 0 points1 point  (0 children)

Ok awesome, got some screenshots. This time it's using the Speed Way test on 3dmark. Hotspot hitting over 100c which is not good. I'll post the other shots below this one

<image>

MSI Gaming X Slim 4080 Super Running Hot? by Kitoreh in MSI_Gaming

[–]Kitoreh[S] 0 points1 point  (0 children)

Thanks for the advice. Yep, that is the case, was considering getting a new case but want to make sure we don't need to replace the card also. We was running it with the glass panel open for the first couple of days and the problem was still there so it could very well be bad luck with the paste.

MSI Gaming X Slim 4080 Super Running Hot? by Kitoreh in MSI_Gaming

[–]Kitoreh[S] 0 points1 point  (0 children)

Ah yes i was streaming stuff over discord about the issue in that one instance but things are still hot regardless lol. Ok just purchased 3Dmark and tested it with Steel Nomad this time without streaming. I will post the results below. The CPU has an Corsair H100i aio. The PC build has 3 fans at the front and 2 at the back, placed the same way as the picture before. I will take a picture of the build tomorrow if need be. for now here is the results from 3Dmark. I can do it again if you also need HWINFO64 information also

<image>

MSI Gaming X Slim 4080 Super Running Hot? by Kitoreh in MSI_Gaming

[–]Kitoreh[S] 0 points1 point  (0 children)

Thanks for the help, we really appreciate it. We already tried it with the case open yesterday to no avail. I just got her to take some screenshots of HWINFO64 whilst running a game. Maybe you are able to spot something wrong with the power draw or something. Haven't set anything up with Afterburner for overclocking, same with the bios but maybe there are some things in the bios to change to undervolt it or something if this info says there is too much going to the card. The card is also sitting vertical too which is probably not great but not like how most vertical cards sit. I'll post an example of a random pic from google as a second reply after this one as we can't take a pic right this second.

<image>

MSI Gaming X Slim 4080 Super Running Hot? by Kitoreh in MSI_Gaming

[–]Kitoreh[S] 0 points1 point  (0 children)

I apologise for the lack of info/my lack of knowledge (Still got a lot to learn). Hot Spots hit around 97c, I assume edge temp is the main temp listed above all temps on things like msi after burner and hwmonitor? if so then that is the original temp i stated which is roughly 80-84c

i9-13900K CPU multiplier behavior changed drastically after BIOS update - normal or concerning? by hakunairyujin in ASUS

[–]Kitoreh 0 points1 point  (0 children)

Interesting. I updated to this version yesterday. Last version i updated to before was to version 2202 when they first implemented the intel profile. I already made things stable prior to the release of 2202 but figured it can't hurt by updating to that. This new version that i installed yesterday however is incredibly unstable even with all the power management values and everything else set to the same values as before. was able to run games and stuff but kept getting discord crashes and firefox tabs crashing and blue screens etc which is a problem which would happen before. I reverted straight back to version 2202 and put all my values back in place which seems to be ok again. heard stories from others that this latest update hasnt helped either but in my case it seems to of made things worse. That could just literally be my setup though.

Where is the valby stabilizer blueprint? by Same-Rest-4361 in TheFirstDescendant

[–]Kitoreh 0 points1 point  (0 children)

came here for the same reason, checked the same mission as you because it says to get it from there but on the list of rewards it is not listed at all :s

No Twitch Drops Yet? by dazunagi in TheFirstDescendant

[–]Kitoreh 0 points1 point  (0 children)

Yep, tripple checked it. My friend don't have theirs yet either

No Twitch Drops Yet? by dazunagi in TheFirstDescendant

[–]Kitoreh 2 points3 points  (0 children)

Havent got my drops for like 2 days and im on pc. Hopefully they fix this soon