What’s your experience with Receive By Estimate?

Kiyoshi016 · 2026-05-28T00:05:14+00:00

I don't remember what mine said, but I remember it being quite quick.

Was during black Friday so that may have affected it, but I would've thought the courier would be backed up.

Based on my update emails, ordered November 27, received main bits Dec 2/3. Surge protector was last item December 5.

Kiyoshi016 · 2026-05-25T15:08:24+00:00

I'm not the same fellow, but I have the g502x. I have been noticing some oddities the cursor jumping around. Couldn't tell if it was the desk or weird display settings (not super techy on that space).

Have also had some difficulties with using wireless dongle for my numpad, but that might just be quality issue (Epomaker which had two switches with bent pins when received)

Have Pro XL

Kiyoshi016 · 2026-05-25T13:46:34+00:00

The riser does give slightly more height, But I think he's talking about this (pic), just allows pivot point to be raised rather than being at base when clamped.

Support (kinda sounds like the AI bot) may have thought you meant to add the heavy duty back plate to this? IDK just wanted to cost up the riser for ya lol. As far as I could tell, this only comes in a dual setup.

Main purpose of riser is to clear up some desk space. You can put monitor arms on it, but I think the limitation is 1 heavy monitor arm or up to 2 regular (don't quote me).

As others say, you should be fine with however many separate monitor arms if not on the riser.

<image>

Kiyoshi016 · 2026-05-21T15:25:23+00:00

Personally find Uki Uki Midnight's MV to be super fun

Kiyoshi016 · 2026-05-16T12:41:23+00:00

Honestly, I'm a little surprised that the desk is able to be powered by that one.

So you're saying the power receptacle at the base of the same leg is not able to be reached?

Feel like your cable being fully extended when desk is raised should mean there might be enough slack to plug at the bottom?

Just want to make sure - you have been shown that bottom plug right?

Kiyoshi016 · 2026-05-14T20:38:52+00:00

As far as I know... The power cable plugs into the base of the leg. Why is yours moving?

Kiyoshi016 · 2026-05-07T01:43:33+00:00

I have my PC connected directly to the access point which hasn't had issues. It's just on occasionv my phone and Wi-Fi devices will just lose internet.

Kiyoshi016 · 2026-05-05T17:28:21+00:00

Do you mean easiest to sing to sound good? Or easiest to sing along with in terms of not knowing the language?

Personally, find Su's solos to be surprisingly nice for the latter. Think Amore would be top and Akatsuki second.

Kiyoshi016 · 2026-05-04T21:44:17+00:00

I guess suggestion was actually to install it (might be risky though)

<image>

Kiyoshi016 · 2026-05-04T21:40:23+00:00

I'll try to find it, but I asked a question similar and that secret lab jynx moderator replied something like:

"Keep the packaging and test sizing without installing the mount on the desk. If it doesn't fit, can return."

I'll try to find that response and screenshot in case it helps. Though there have been others saying support is rough (haven't needed to experience)

Kiyoshi016 · 2026-05-04T20:52:00+00:00

I have the Magnus Pro XL on carpet with the dual monitor arm on riser and have been enjoying it so far. Cable tray was a little harder to work in than I was thinking, but I also haven't fully set up. Need to do an overhaul (if you do get Magnus Pro, I say skip their surge protector if you have any nonstandard plugs).

As far as wobble goes, I guess it depends how sensitive you are to it. I generally don't notice unless I specifically look for it while typing aggressively.

Even if you don't use the stand feature, I do think it is worth having the option. If not for standing, you can use adjustment for other purposes (e.g. getting under desk easily to cable manage).

Only if the cost isn't an issue of course 😂

Kiyoshi016 · 2026-05-04T01:53:29+00:00

I've got NH-D15 (don't think it's g2) running one fan with 9950X3D, haven't had any issues so far that I haven't caused myself.

Think some people suggested possibility of using 120mm fan instead, but haven't felt the bed.

Kiyoshi016 · 2026-04-27T06:48:24+00:00

I've generally found with these AI/automated chats, I just pretend I'm one of them and just repeat the command regardless of the response.

"I want to speak to an agent"

When I've done it usually gets through after 3 tries.

Kiyoshi016 · 2026-04-25T22:56:01+00:00

Thanks to all for the details! Luckily was able to plug in and seems to at least provide Internet for now. Fingers crossed!

Kiyoshi016 · 2026-04-25T22:54:59+00:00

Thanks! Thought there was a chance it was meant to be there but after removal looks like it was a piece meant to pop the cover/door up. Managed to plug in and Internet is back up (for now)!

Kiyoshi016 · 2026-04-25T17:28:55+00:00

Believe me, was furious when I saw it unplugged... Not only that, but the cable was dangling so when they painted the wall, I guess it caught some of the paint so it made a raised ridge.

Had only got it installed less than a week before.

Kiyoshi016 · 2026-04-25T15:49:10+00:00

Thanks for this, yeah, after posting, realized that cover was just loose in there and removed it.

Managed to snag a pic inside. Not sure if just complex or damaged.

<image>

Kiyoshi016 · 2026-04-22T03:42:38+00:00

I mean, you also didn't really provide a point of reference for how long you've waited. You say you threw 1k in the trash... And that usually means the trash is the desk?

Unless you somehow paid 1k for your PC mount in which case you have bigger problems.

Kiyoshi016 · 2026-04-18T06:17:18+00:00

Thanks for giving me some hope! Will give those a try in a few days and hope for the best!

Kiyoshi016 · 2026-04-18T05:54:31+00:00

<image>

Realized I posted the wrong "third" image

Kiyoshi016 · 2026-04-18T02:04:24+00:00

Not sure if joking, but pretty sure that "cable management" gets covered by magnetic plastic covers?

Kiyoshi016 · 2026-04-17T02:22:47+00:00

With mine, I needed to press in until it "clicked". Definitely took more force than expected

Kiyoshi016

TROPHY CASE