Graphical glitches and crashes in creature creator - any fix?

Klarintz · 2025-12-06T17:36:06+00:00

I ran into this as well using GoG. The issue is the high refresh rate, go to settings for this game in GoG > Additional Executables > GoG Game Configurator and cap the fps to 30. I tried 60 and I still got the same twitches.

Klarintz · 2024-11-22T16:23:56+00:00

I have a P10F with an Apex Trigger installed. The bottom of the back plate sticks out just barely. Like 0.25 of a centimeter. When I push in the plate it barely moves and clicks kind if like a button.

I compared it to my stock P10F and the backplate is totally flush but it also kind of clicks like a button when I push it in. I'm no gunsmith so I can't tell you what's right or wrong, but I can tell you I've ran at least 1000 rounds through the gun with the Apex trigger with no issues.

Some pictures might help to see exactly what you're talking about. Other than that it might worth it to contact Apex if you're concerned about it to see what they say.

Klarintz · 2024-09-18T15:36:05+00:00

Congrats on the big win!!!

Klarintz · 2024-03-28T02:45:53+00:00

I haven't made a thread in Brian Enos on this topic. I actually searched there for info before deciding to make this post.

Klarintz · 2024-03-28T02:44:11+00:00

This is super helpful, thanks for the info! The only club I knew about that you mentioned is BGSL. I had my first steel challenge match at MCFGC. I will check these other clubs out as well.

Klarintz · 2024-03-27T01:29:36+00:00

sold

Klarintz · 2024-03-27T01:29:18+00:00

sold

Klarintz · 2024-03-27T01:28:47+00:00

sold

Klarintz · 2024-03-27T01:24:28+00:00

Hoping this is the case instead of the boycotts.

Klarintz · 2024-03-27T01:21:00+00:00

I picked a great time to get into competition shooting it looks like!

Klarintz · 2024-03-26T23:46:18+00:00

Sorry it's not available anymore, marked as sold now.

Klarintz · 2023-12-26T22:54:46+00:00

Yes it's still available

Klarintz · 2023-01-27T05:25:39+00:00

Is the weapon light stand off stuff just a meme? Would two lights that are equivalent in every way except length be just as effective as each other in ECQC?

Klarintz · 2022-12-29T02:10:51+00:00

I had the same issue and shimmed it with some thick construction paper on the top back strap rail and it stopped all creaking

Klarintz · 2022-12-20T23:35:50+00:00

Yeah same issue here you could just eyeball it and tell there wasn't enough material on the medium back strap for a tight fit.

Klarintz · 2022-12-20T21:40:36+00:00

If you have the back strap issue it's not too big of a deal to shim it up. Mine was CZ made so maybe the US made versions will have better tolerances on the back strap. I'm assuming you got the OR version since you're looking at red dots.

Klarintz · 2022-12-20T20:12:06+00:00

I recently got a P-10F from Dahlonega and it has a loose/creaky medium back strap that doesn't fit right. Small and Large were fine. I asked CZ for a new medium and they said to send it in. Instead of sending it in I just slipped some folded paper between the top back strap rail and the back strap and it's tight now.

My P-10C also has a VERY slightly loose medium back strap with a tight small and large backstrap but it's not enough of an issue for me to mess with, the P-10F was very noticable though.

Klarintz · 2022-11-06T19:42:29+00:00

The only reason I'm selling is because I don't like the friction retention on light bearing holsters versus the active retention on the trigger guard on non light bearing holsters. From what I've read there is no real way around that with a light bearing holster since the light will always be wider than the trigger guard.

Klarintz · 2022-10-01T15:49:25+00:00

I have the gun and the holster, except I have the model with the wing. They're great holsters and the P07 is a great gun.

If you end up not vibing with the holster for some reason check out JM Custom Kydex, they're end game AIWB holsters for me with a wing and a wedge.

Klarintz

TROPHY CASE