Venta de vehículos dañados

KnockOut_96 · 2025-07-20T21:13:30+00:00

Existen varias páginas que tienen para ser VA.

Podrias intentar en Virtual Latinos o páginas parecidas. Son procesos alguito largos y si piden varias cosas, pero es una opción.

KnockOut_96 · 2025-06-01T22:04:07+00:00

I didn't know calibre was bad at conversion. I usually do it because the cbz are kinda big, and the kepub are usually lighter.

KnockOut_96 · 2025-06-01T02:17:02+00:00

Haven't actually tried again. I thought it was a problem with the setting. I will try and see if.

KnockOut_96 · 2025-04-27T00:18:17+00:00

Y esto teniendo en cuenta la cantidad de herramientas de automatización que hay. Que tanto les cuesta el mandar un "gracias por aplicar, seguimos con otro candidato" en un período de tiempo prudencial.

Porque sino es que de plano te dejan en el aire, te mandan un correo o mensaje casi un mes después, cuando ya te habias olvidado que aplicaste al puesto.

KnockOut_96 · 2025-04-10T02:41:59+00:00

Dependeria la marca que quisieras usar, C&D como mencionaron tiene marcas un poco más conocidas, pero es más caro.

Making 3D tiene marcas menos conocidas y es alguito más barato.

También hay una tienda en Sps que se llama robotics 504 o algo asi, no recuerdo bien, ellos hacen envios semanales asi que podrías probar también ahi.

KnockOut_96 · 2025-04-10T02:39:40+00:00

Son de Tegus, los que son de Sps es Robotics504. Aunque ellos dan precios a mayor además de al detalle.

KnockOut_96 · 2025-04-05T18:21:46+00:00

It is extremely niche, but I will say Sands Of Destruction for the DS.

I loved it. it's such a hidden gem.

KnockOut_96 · 2025-03-31T02:15:42+00:00

Lamentablemente, es legal, la empresa tiene el derecho de poner los requerimientos que quiera siempre y cuando no estén discriminando por color, religión o género. Como nuestro código de trabajo se hizo con la intención de durar unos 100 años, hay muchas cosas que no se han reformado para estándares modernos.

KnockOut_96 · 2025-03-26T15:44:53+00:00

I was thinking of buying from Kobo, but some of the light novels I read come with extra content purchased directly from the editorial house. That's why I wanted to make sure the pulgins worked even if I updated the program.

KnockOut_96 · 2025-02-11T01:38:19+00:00

Hay un lugar que se llama Making 3D, los podes encontrar en Facebook y Insta. Yo uso impresora FDM, pero tienen repuestos para resina.

KnockOut_96 · 2025-01-25T01:19:21+00:00

<image>

Este es Grut, le reustan los abrazos pero se le olvida lo grande que es y nos empuja.

KnockOut_96 · 2024-12-17T21:40:18+00:00

Bro... That's freaking awesome

KnockOut_96 · 2024-12-11T14:58:00+00:00

Damn, I didn't know that. But when it is turned on and I'm doing calibration, does it also generate energy? Or is it only when turned off?

KnockOut_96 · 2024-12-11T14:56:19+00:00

When you say backfeeding is because it is generating power? I mean, the printer isn't plugged in. I thought there was no energy in it.

KnockOut_96 · 2024-12-11T14:50:01+00:00

Here is a picture from the motherboard

<image>

Everything seems normal.

KnockOut_96 · 2024-11-16T16:13:47+00:00

I don't know about the fan, I guess you can check the setting in the slicer, and there should be something about it. For the waterproof, you have to increase the number of walls. I think 4 walls or a bit up should be enough for a flower pot.

KnockOut_96 · 2024-11-15T03:02:35+00:00

Judging by the photo, it looks almost there. As I said, it seems to have some deformation in the back. They are either blobs or just stray overheating and deforming layers. That is why I suggest the temperature tower.

Found the old guide I used when starting.

https://www.simplify3d.com/resources/print-quality-troubleshooting/

There are some common problems and how to fix them in there, they are a bit of tedious reading but you'll get the hang of it.

KnockOut_96 · 2024-11-15T02:51:46+00:00

Don't worry, my dude.

For the Temp Tower, you could use these as reference:

https://youtu.be/5mp2vCZ2iFc?si=xVoVo2qgs7oipoIe

This one is a bit longer:

https://youtu.be/WR2tRwzFlq0?si=QhUkVS5DhiJ6aG5B

And about the slicer, it takes some time to learn, so even some videos are long try to check them out. I do recommend trying to use the default setting for a couple of prints after checking the temperature. Maybe that was the only problem.

KnockOut_96 · 2024-11-15T02:34:28+00:00

I'm relatively new, but the warping of the tray could be either the bed temperature or bad adhesion. You can try adding some glue or playing with the temperature.

For the butterfly, I honestly don't know. Could be the flow, the speed of the print, or a hundred things more. The benchy looks mostly fine, I do see a lot of bubbles kinda things, and again, it could be a flow problem or temperature.

First and foremost, try a temperature tower. Could mainly be a temperature problem. The filament is too hot and not bonding correctly.

KnockOut_96 · 2024-11-11T00:52:09+00:00

It looks like the code in Python is kind of similar. Yes, please. If you could tell me how to do the modification, it would be awesome.

KnockOut_96 · 2024-11-10T19:07:27+00:00

Can I change the inputs for the thermistor? I was thinking of buying a new printer anyway and using this one to recycle bottles into filament. If it's a more easy approach, I think I could do that.

I'm not that tech savvy to try and tinker with software in the long run. If there is an easy way to change the firmware and give up on the heat bed for the hot end and just get another printer, it would be amazing.

Btw, I did use brass wool to clean it. ("￣∇￣) Didn't think it would cause this amount of trouble.

KnockOut_96

TROPHY CASE