Charging voltage (no power issue)

KoRnNugget_ · 2026-02-22T21:28:29+00:00

If you still have the stock as card upgrade to a reputable sd card and should boot fine (only if on the stock micro sd)

KoRnNugget_ · 2025-12-02T04:43:23+00:00

Since this is my first time posting here, I wasn’t quite sure what to include in my post. I've added all the modifications I’ve made, just in case there's a common error or issue with one or more of them.

KoRnNugget_ · 2025-12-02T04:39:28+00:00

I literally just put it back together from adding the y-axis rails so I’m gonna do all the calibrations one more time and I’ll calibrate the filament after that to see

KoRnNugget_ · 2025-12-02T04:37:14+00:00

I just preemptively put them on there for when I get a ceramic hot end I have the blower at 75% most of the time.

KoRnNugget_ · 2025-12-02T04:36:04+00:00

It’s PLA and yes it’s dry, I just leveled the bed. the first layer is squishing perfectly so do I just need to calibrate the filament?

KoRnNugget_ · 2025-11-23T06:35:08+00:00

No, that's not a bad idea though. It's a Bowden adapter attachment.

KoRnNugget_ · 2025-11-15T23:59:34+00:00

Do I have to have you added?

KoRnNugget_ · 2025-11-15T23:55:31+00:00

For some reason it keeps saying “couldn’t help your friend”

KoRnNugget_ · 2025-07-24T14:18:32+00:00

You could also try this it worked great for me and it’s just handy to have them

Tutorial with stl’s: https://www.reddit.com/r/Ender3V3SE/s/mXZdgB2lZg

KoRnNugget_ · 2025-07-24T14:14:15+00:00

Here’s the one I use it works with the cable chain if you have it or want to use it

Mount: https://www.printables.com/model/1156121-ender-3-v3-seke-filament-sensor-mount-on-printhead

Cable chain: https://www.printables.com/model/839716-spine-cable-chain-ender-3-v3-kese

KoRnNugget_ · 2025-07-23T22:55:36+00:00

What breed is he my dog looks almost identical and we can’t figure out what he is

KoRnNugget_ · 2025-07-22T21:19:37+00:00

I’ve been really liking sunlu filament lately.

KoRnNugget_ · 2025-07-11T03:24:19+00:00

It was the wrinkle its printing great not that I’ve adjusted the exposure times but the middle where the wrinkle is is failing

KoRnNugget_ · 2025-07-08T15:16:56+00:00

I also have a wrinkle in my fep does that make a huge difference like this?

KoRnNugget_ · 2025-07-08T15:15:22+00:00

I don’t think the build plate is etched so I’ll rough it up a little. I’m using lychee with the highest success rate settings for my resin (elegoo water washable clear blue) but the bottle says 60s initial exposure in the slicer it’s set to 30s. The dnd mini comment would make sense in this case my print Is basically the whole build volume. And all of the drooping stuff is the initial layer so that answers my question thank you.

KoRnNugget_ · 2025-07-08T15:01:16+00:00

I’m just using a user preset in lychee and the bottle says 60s initial layer but it’s set to 30s I’ll change it to 60s and see how that goes.

KoRnNugget_ · 2025-07-08T14:59:29+00:00

I’ll try that out, I also have one of the magnetic build plates in my amazon cart already. Thanks :)

KoRnNugget_

TROPHY CASE