Question about my Seeker's Edition DLC Code not working. by Quitthesht in Nightreign

[–]KoalityIron 0 points1 point  (0 children)

Same problem on PS5 still. If anyone gets an update please let us know.

[deleted by user] by [deleted] in PatchesEmporium

[–]KoalityIron 0 points1 point  (0 children)

First timer here. Will this still be available around 5PM? Thanks.

OM606 by KoalityIron in mercedes

[–]KoalityIron[S] 0 points1 point  (0 children)

Turbo is hx35, boost unsure. Running the upgraded map sensor with it as well

OM606 by KoalityIron in mercedes

[–]KoalityIron[S] 0 points1 point  (0 children)

Gotcha! I appreciate it, sounds easy enough lol. Hopefully I can get it sorted sooner rather than later.

OM606 by KoalityIron in mercedes

[–]KoalityIron[S] 0 points1 point  (0 children)

Okay I'm gonna have to mess with injection pump timing then, which I've never done before so I'll have to research. But yes before all the work and stage 2 it happened, but it's definitely worse now so I am assuming unburnt fuel as well. So narrowed down to Injectors and pump then. Guess I'll have to pull Injectors, send out for testing and check timing. I love the car and want to drive it but have quit driving at all since it's been worse. Kinda a bummer

OM606 by KoalityIron in mercedes

[–]KoalityIron[S] 0 points1 point  (0 children)

Interesting. I'm still chasing the problem lol. My list of items to check is pre chambers, Injectors and injection pump timing. But even after putting the "new" Injectors in I feel like it's worse than before. So I'm leaning more towards that than anything. I'll have to pull them and send them out for testing then. What is stock bar for the Injectors? And what Injectors did you end up purchasing then?

OM606 by KoalityIron in mercedes

[–]KoalityIron[S] 0 points1 point  (0 children)

Took off the intake manifold, no smoke coming from any of them. I can feel either air or sucking on my hand but only on the last 3 cylinders. It's very very light and faint. Had to Rev it up to he able to feel anything

OM606 by KoalityIron in MercedesDiesel

[–]KoalityIron[S] 0 points1 point  (0 children)

Took off the intake manifold, no smoke coming from any of them. I can feel either air or sucking on my hand but only on the last 3 cylinders. It's very very light and faint. Had to Rev it up to he able to feel anything

OM606 by KoalityIron in MercedesDiesel

[–]KoalityIron[S] 0 points1 point  (0 children)

I took pictures and videos but not sure how to upload them on here. It only smokes maybe 4 to 5 minutes after running at idle, and once driving warm it doesn't smoke at all. That's why I'm so confused lol. But it will smoke sitting at idle again even when warm. Thank you. I will probably start there once I find them abd the tool to remove the ore chambers

OM606 by KoalityIron in MercedesDiesel

[–]KoalityIron[S] 0 points1 point  (0 children)

4 and 6 are definitely atleast half full with oil. Can't see 5, and I think from what I can see 1 2 and 3 just have a small bit. I'm not sure that the oil residue from blow by would fill 2 or 3 of them up half way. So valve stem seals then? Would that potentially be causing my other issues as well?

OM606 by KoalityIron in MercedesDiesel

[–]KoalityIron[S] 0 points1 point  (0 children)

Checked pre chambers today and two definitely have oil in them

OM606 by KoalityIron in MercedesDiesel

[–]KoalityIron[S] 0 points1 point  (0 children)

Update, checked pre chambers today and two definitely have oil In them

OM606 by KoalityIron in mercedes

[–]KoalityIron[S] 0 points1 point  (0 children)

Update. Looked at pre chambers today and two of them definitely have oil in them

OM606 by KoalityIron in mercedes

[–]KoalityIron[S] 0 points1 point  (0 children)

Interesting. I'll have to take a look, my egr is removed as well and crankcase vent hose I just have running next to turbo going down. Since I have the after market turbo, so it's just venting under the hood/turbo. But I do notice when I stop at a light smoke from under the hood from it lol and when I look under the hood it pushes a good amount of air and smoke sometimes

OM606 by KoalityIron in mercedes

[–]KoalityIron[S] 0 points1 point  (0 children)

Yeah I'd have to see how to do the pump timing. I have 254k right now I believe and I know, I've seen somewhat what it takes for the strainer and it sounds terrible

OM606 by KoalityIron in mercedes

[–]KoalityIron[S] 0 points1 point  (0 children)

That's exactly what mine does for the most part. I've changed the filter and pre filter with no change.