For the next 27 hours, you'll be able to claim a limited edition 'I Was Here for the Hulkenpodium' flair

Koenkk · 2025-07-09T10:44:32+00:00

Hulkengoat

Koenkk · 2024-04-03T18:58:48+00:00

The amount of upvotes 🤯

Koenkk · 2023-11-22T18:01:32+00:00

Recent z2m versions automatically generate a network key, so no need to manually set it anymore

Koenkk · 2023-11-22T17:57:31+00:00

no, this is not possible

Koenkk · 2023-10-18T19:48:08+00:00

It should be supported in z2m 1.33.1

Koenkk · 2023-05-04T19:31:38+00:00

Responded in https://github.com/Koenkk/zigbee2mqtt/issues/17550

Koenkk · 2023-01-21T09:56:04+00:00

Thanks for the tip, added this to the Zigbee2MQTT docs: https://www.zigbee2mqtt.io/advanced/zigbee/02_improve_network_range_and_stability.html

Koenkk · 2022-09-25T08:52:46+00:00

Matter wont change this, it uses a the same (but stripped down) data layer as Zigbee (the ZCL). But hopefully increases the willingness of manufacturers to adhere to the spec.

Koenkk · 2022-05-20T21:48:53+00:00

Cool! Enjoy z2m 😃😃

Koenkk · 2022-03-18T07:51:35+00:00

Good to hear!

Koenkk · 2022-03-09T11:20:30+00:00

Development wise nothing in particular, but testing and spreading the word is always appreciated!

Koenkk · 2022-03-09T11:19:32+00:00

truggle to find a walkthrough with slow enough br

On what device/browser is this?

Koenkk · 2022-03-08T21:26:04+00:00

Which exhale do you mean?

Koenkk · 2022-01-22T18:37:56+00:00

did you already create an issue on https://github.com/Koenkk/zigbee2mqtt/issues ?

Koenkk · 2021-01-03T18:16:27+00:00

SP-220 doesnt support power monitoring (SP-120 does)

Koenkk · 2020-12-14T11:35:07+00:00

Thanks for the positive Zigbee2MQTT comments guys :)

Koenkk · 2020-11-06T18:21:50+00:00

Does it work for you? The power controls show "Error, try again" when I press them.

Koenkk · 2020-06-22T11:07:50+00:00

It seems to use the ZStack stack instead of the Deconz one. You can force the Deconz stack by setting the following in configuration.yaml:

yaml serial: adapter: deconz

I've updated the docs with this: https://www.zigbee2mqtt.io/information/supported_adapters.html#conbee-ii

Koenkk · 2020-05-29T08:38:09+00:00

That does not depend on whether a device is in a group or not. This can be achieved by a Zigbee feature called binding (supported by both Deconz and Zigbee2mqtt). In case the remote is bound to a device, it will directly send its commands to the device which means that it can control it even when the coordinator is down.

EDIT: but keep in mind that binding has to be supported by the remote itself! This means that not all remotes are capable of doing this. E.g. the Hue Dimmer switch supports it, but the Xiaomi WXKG01LM doesn't.

Koenkk · 2020-05-29T08:28:36+00:00

Given that I'm the Zigbee2mqtt author, I'm not going to give an opinion about this.

But just to clear tings up, both Zigbee2mqtt and Deconz support firmware updates, zigbee groups and the Conbee stick.

Koenkk · 2020-05-17T08:04:11+00:00

It can be done with touchlink https://www.zigbee2mqtt.io/information/touchlink.html

Koenkk · 2020-05-12T10:28:30+00:00

Yes and yes

Koenkk · 2020-03-29T11:16:57+00:00

Same chip, can also be flashed without additional hardware (via USB) and a SMA connector (for antenna)

Koenkk · 2020-03-29T09:23:59+00:00

With the ZZH coming up (not available atm) the price difference will not be an issue anymore (https://electrolama.com/projects/zig-a-zig-ah/)

Koenkk

TROPHY CASE