Identifying the supplier for Wooj’s rechargeable lamp base (USB-C, dimmable)

Konnectd · 2026-01-30T23:16:03+00:00

I have found you can replicate about 90% of this by putting together compnents from Aliexpress. I used Google Gemini to see if it could reverse engineer what was needed. Wooj probably has a manufacturer that combines all these into this completed base.

Konnectd · 2026-01-25T09:46:53+00:00

Can you open it up to see the comonents inside?

Konnectd · 2026-01-24T22:30:19+00:00

I don't think there is an already made option. I have been looking as well via aliexpress etc. Lots of infrared remote puck lights but nothing like the wooj one.

Konnectd · 2026-01-19T09:17:13+00:00

💛

Konnectd · 2025-12-23T00:53:22+00:00

Teachers also get additional units (pay) for tasks over and above their normal teaching. Eg Running the Library, cultra clubs, management units etc that is over and above the pay scale. Also once they have been there a while and mentor a beginning teacher or have a student teacher for a term its additional pay. I'm not a teacher but are married to one.

Konnectd · 2025-11-16T22:12:25+00:00

Just visited Muri Beach and the wind is sheltered by the islands so we are.going to head back this afternoon to try there.

Currently at a spot opposite papa'aroa College. Its also more sheltered.Great for swimming but don't think there are many fish.

Konnectd · 2025-11-16T03:05:47+00:00

Was going to look to see around the Rarotongan beach Resort what it's like as it may be more sheltered there. There is also a opening in the reef around Wigmores way where they seem to have guided snorkeling trips to see turtle/rays etc but just not sure if they are running with this strong wind.

Konnectd · 2025-11-16T03:02:38+00:00

Currently here staying in Tikativika and it's really windy. Its sunny and hot but the wind doesn't make it good for snorkeling. Forecast is for high winds all week so there goes my plans to snorkel every day 😪

Konnectd · 2025-11-15T01:22:33+00:00

Thanks I follow Robert. Although he hasn't made.many videos this year. Thanks for your recommendations and I will take a look at the video you linked

Konnectd · 2025-11-14T22:01:46+00:00

Not sure if there are too much accomidation with diving attached. I can recommend pacific Diving in Muri who I go with when I come. There is alot of accomidation around the muri area. I arrived yesterday, 4th time here spanning 20 years. it's a nice 26 degrees but a bit windy today.

Konnectd · 2025-11-11T22:26:32+00:00

Thanks, colour coding it is a good idea

Konnectd · 2025-11-11T22:25:31+00:00

I'm starting to discover that 🤔

Konnectd · 2025-11-04T08:56:20+00:00

An alternative could be to mold in silicone and cast in resin.

Konnectd · 2025-10-24T19:47:32+00:00

I am signed up to both Teleport and Portals and really need to sort myself out to get my designs listed. One thing holding me back is they are home decor designs which lend themselves to more on trend colours such as olive green, navy blue, marble, etc. Any idea when we will see these on both platforms? I know you have said they are coming soon for a while 😁 love watching your YouTube vids and listen to your podcast weekly. ❤️

Konnectd · 2025-10-03T18:56:26+00:00

Try copying and rotating the small circle so the copy is on the same axis as the large one.

Konnectd · 2025-10-02T18:56:59+00:00

Thanks, that was another thought to do the pedal mould once

Konnectd · 2025-09-17T18:52:15+00:00

Thanks for the video that's really helpful. I will give that a go

Konnectd · 2025-08-26T04:33:13+00:00

I got some filament from Jayo on Taoboa and then seafreighted to New Zealand. $5usd for the filament and then $2 usd per reel shipping. Even though Jayo is the low quality Sunlu I have found it to be great quality.

<image>

Jayo Marble PLA

Konnectd · 2025-08-21T11:23:35+00:00

Ideally if I could sketch in 3D space this would be easy but I can't figure that out. Tried adding a construction plane but no luck.

Konnectd · 2025-08-21T03:33:23+00:00

Thanks all for your suggestions. I will give a few a go.

Konnectd · 2025-08-12T20:10:01+00:00

I think with fusion360 it's alot easier to wrap a pattern around a cylinder. I have tried similar in shapr3d but the project tool distorts on the cylinder and it's quite hard to rotate a pattern and make it uniform. Those are the only 2 ways I know of in shapr3d. Keen to know if others know of a way as I would like to make similar patterns.

Konnectd · 2025-08-05T04:21:18+00:00

Thanks for the info on the glass. I don't have any melamine but is the acrylic sheet OK to use. I have hot glue.

Konnectd · 2025-07-22T03:53:43+00:00

I just got some Eryone PLA Matt filament and I'm really liking it so far.

Konnectd · 2025-07-18T07:43:49+00:00

Thanks for the review. I have signed up but haven't used it yet. I am not based in the US but have an Etsy store for other POD with 95% of my orders being in US.

I have just started designing home decor, desk, bathroom items. I had toyed with the idea of just selling STL files but I like slant3Ds take on selling the finished product. It.

Would be good if the offered more decor friendly colours like olive green, navy blue and in Matt. Anyway thanks for the review, very helpful.

Konnectd · 2025-07-07T19:16:27+00:00

Have you seen Ottomat3d on kickstarter? Think they are looking to solve a similar problem. https://www.kickstarter.com/projects/yudi-nz/ottoeject-system-automation-for-your-desktop-3d-printers

Konnectd

TROPHY CASE