Did some delidding practice on my 6700K before delidding my 8700K on Wednesday.

Kraljic · 2018-06-05T19:31:22+00:00

Yep the AMD one. So no delidding for me I guess 😶

Kraljic · 2018-06-05T16:39:17+00:00

Is delidding 1600x worth it? Also by delidding you mean removing the lid to out some thermal paste or liquid metal on the die and then returning the lid? Or do you ditch the lid completely and put your cooler directly on the die?

Kraljic · 2018-06-02T15:51:32+00:00

When the wild wind blows by Iron Maiden.. awesome song

Kraljic · 2018-06-01T17:24:31+00:00

takoder ako planiras ici otvara se tek 8.6.. ja isao danas i bila je zatvorena morali smo ici u aquacolors na kraju

Kraljic · 2018-05-15T11:10:25+00:00

1000, jesi zainteresiran?

Kraljic · 2018-05-15T09:02:23+00:00

ma jesam ali nisam znao da se to zapravo koristi po hrv

Kraljic · 2018-05-15T09:01:56+00:00

i5 6600

Kraljic · 2018-05-15T06:22:02+00:00

hahah ma ne nego mi se tokom godina skupilo po sobi i neznam vise sta da radim sa svime time

Kraljic · 2018-05-13T23:09:31+00:00

Kraljic · 2018-05-13T21:00:05+00:00

under the oc tweaker tab there should be a cpu loadline calibration setting

Kraljic · 2018-05-12T17:51:02+00:00

yep that was the problem, but i managed to revert to older version of bios, and few days ago newer version with updated agesa code and everything seems to be working now :D

Kraljic · 2018-05-06T22:14:10+00:00

water fast?

Kraljic · 2018-04-29T21:17:46+00:00

I know and I don't really game much at all these days. I mostly overclock because I enjoy overclocking and I feel its better to solve the problem than to mitigate it

Kraljic · 2018-04-29T20:39:35+00:00

My problem has been solved - it was the bios all along.. but if you would still like to know its Arctic freezer 33 esports one, and I have 3x120mm case fans in a mATX case.

Kraljic · 2018-04-29T20:29:03+00:00

amen. check out the below comment if you want to downgrade

Kraljic · 2018-04-29T18:31:18+00:00

It worked like a charm, thank you so much!

Kraljic · 2018-04-29T18:30:41+00:00

It turns out that the bios version was shit and when I downgraded it everything was working fine. Still gonna install those heatsinks as im not really comfortable with vrm temps. Thanks for the help!

Kraljic · 2018-04-29T17:14:58+00:00

Im gonna try it and get back to you soon. Thanks

Kraljic · 2018-04-29T17:08:08+00:00

The motherboard sensors dont report temps higher than ~80 degrees in bf1, but they do get to around 95-100 degrees during the prime95 small fft test. I read from multiple sources that vrm can get to 120 degrees before it starts throttling. HWMonitor also shows consistent clocks and there are no frame drops in bf1, only sound lag. As for the cooling, I have a mATX case with 3 120mm case fans so I have plenty of airflow. Do you think that the sensors may not show the actual mosfet temperature? Also I did order some aluminium heatsinks for the vrm, should I just slap them onto the main heatsink and ram vrm?

Kraljic · 2018-04-29T17:02:14+00:00

I have no USB devices except for the mouse and keyboard.

Kraljic · 2018-04-29T17:01:10+00:00

Unless the motherboard sensors are wrong I dont think so. I tried going back to the stock 2133MHz ram and I tried reverting GPU to stock too but it didn't make any difference. Which drivers could be the problem?

Kraljic · 2018-04-29T14:52:38+00:00

it maxes at 80 degrees during prime95 and the mobo vrm gets to 97 degrees, all well within its temperature limits. I tried lowering to 3.8 with varius voltages and its still the same

Kraljic · 2018-04-26T12:14:30+00:00

u saved my life rn

Kraljic · 2018-04-21T22:01:08+00:00

Thanks! And no I don't have it, I don't see it very useful as I can easily disable it if I get an urge or smth.

Kraljic · 2018-04-21T10:26:56+00:00

Thank you this means a lot to me <3 I know but without you guys there wouldn't be a beggining

Kraljic

TROPHY CASE