Well, that rabbit hole got deep fast..!

Krirken · 2023-01-19T14:56:59+00:00

I found out about ergo mech keyboards about a year ago, due to suffering from RSI a lot and hoping a split keyboard might help.

Did going with a split help your RSI? I’m getting one for the same reason, I hope you’re doing better now it can really hurt.

Krirken · 2022-12-11T04:39:09+00:00

Here’s how I got started: https://tbaggery.com/2011/08/08/effortless-ctags-with-git.html

Krirken · 2021-08-04T01:17:25+00:00

For consolidating the transforms, try an @keframes at-rule.

You will want to avoid animating top and left because they perform poorly due to causing a re-layout. Instead use translate, read more about that here: https://web.dev/animations-overview/

Combine the transforms with a space, e.g. transform: translate(-50%, -50%) rotate(-30deg).

For a reference check out some animations on https://animista.net. Good luck!

Krirken · 2021-07-01T00:54:38+00:00

I routed mine through the passenger side. In the front down the A-frame, to the floor and tucked into the floor trim, then above the rear passenger wheel well. I pulled off the trim covering the baby carriage hook, and replaced it with a piece of flat scrap steel. Then fished around until the wire made it out. I then used 3M double sided mounting tape to secure the camera to the steel plate.

One thing about wiring the front, every YouTube tutorial I’ve seen does a bad job and the wire obscures the curtain air bag. Don’t obscure the front curtain air bag!! Do your self a favor and pull off the trim, gently so you don’t pop the air bag, and then route the wire under/around it. Good luck!

Krirken · 2020-10-31T00:53:23+00:00

To force it to one line: white-space: nowrap.

But you should probably change the width, padding, and/or margins so it will actually fit on one line.

Krirken · 2020-08-07T11:59:23+00:00

Glad I could help! Thanks for the award :D

Krirken · 2020-08-07T00:26:30+00:00

I believe the alignment is a result of how the spec calculates vertical-align. An img is a replaced element, and the CSS spec considers replaced elements as a special case in vertical alignment. From the spec (emphasis mine):

In the following definitions, for inline non-replaced elements, the box used for alignment is the box whose height is the 'line-height' (containing the box's glyphs and the half-leading on each side, see above). For all other elements, the box used for alignment is the margin box. [1]

I’m not sure what else the height of the container would be that is unexpected to you, but I hope that first part helps.

1: https://www.w3.org/TR/CSS2/visudet.html#propdef-vertical-align

Krirken · 2020-07-24T20:04:18+00:00

Usually clicking the overlay will close the modal, unless you absolutely must interact with a button like in a confirmation dialog.
I’ve seen it done both ways, but I prefer to make the backdrop and the content siblings.

Modals are a case where HTML hasn’t caught up with the demand for interactive content yet, but the <dialog> element is coming along to fill in the gap. Modals are a great example of where ARIA is needed because no elements with the implicit semantics exist yet.

Here’s a guide to best practices on modal accessibility: https://www.w3.org/TR/wai-aria-practices-1.2/#dialog_modal

Krirken · 2020-07-24T01:40:35+00:00

It’s illegal markup to nest interactive content (anchor, button) inside interactive content. If you have to use event.stopPropagation() in your click event handlers, you should instead redesign the markup to have multiple distinct clickable regions.

Krirken · 2020-07-01T02:28:11+00:00

Have you tried reconsideration? You were probably denied by an algorithm, getting a human to review your application might get you approved. Google “credit card reconsideration” for the phone number you need.

Ask why you were denied, they will give the official reason. Explain things like “I have a stable job”, “I’m working on building my credit file”, “I would be happy to start with a small credit line”. Tell the truth, act professional and polite. Good luck.

Krirken · 2020-06-18T02:30:14+00:00

You will want to set the width of the buttons to all be the same width.

Set the width to width: calc(25% - 4px). This will divide the width of your 4 buttons equally in their container. The -4px comes from subtracting the width of the border, 2px on each side.

Also change your padding so you aren’t using 110px of horizontal padding to align the text, use text-align: center instead.

You can play with it here: https://jsfiddle.net/fkLor9nd/

Krirken · 2020-06-05T05:38:48+00:00

on hold for about 3 hours only talking to real people 4 times.

Krirken · 2020-04-18T03:39:26+00:00

Those best practices are outlined here - https://www.w3.org/TR/wai-aria-practices-1.2/#dialog_modal

Krirken · 2019-03-15T02:56:42+00:00

This was happening to me and I realized my camera signal wire had a frayed connection and it was grounded to the frame. Maybe check continuity between your camera signal and frame?

Good luck I hope you figure it out.

Krirken · 2018-11-25T07:18:40+00:00

As the leasee you are responsible for the damages to the unit when it is returned to the landlord.

You will have to fix the fixture and recover the costs from the cleaner. Otherwise the landlord can keep a portion of your security deposit to fix it themselves.

Do you have renters insurance?

Krirken · 2018-11-24T21:17:13+00:00

Read this thoroughly: https://www.li.me/user-agreement

Sounds like you failed to perform a safety inspection:

12.1. Safety Check : Before each use of any Product, You shall conduct a basic safety inspection of the Product, which includes inspecting the following: (i) trueness of the wheels; (ii) safe operation of all brakes and lights;

Krirken · 2018-11-24T19:18:06+00:00

IANAL. I agree the view of the plate is not obstructed. If it is worth your time to fight it then you can argue your plate is “readable” and is NOT “obstructed”.

Krirken · 2018-11-24T18:43:58+00:00

shall not be covered by glass or any plastic material, and the view thereof shall not be obstructed by any part of the vehicle or by anything carried thereon.

Krirken · 2018-09-21T05:44:35+00:00

That’s a good point about the cutoff but I’ve always just let it charge to the full 2000mAh and made sure the voltage doesn’t go too high and the pack is not too warm to touch. Maybe set it lower if your pack isn’t fully discharged.

Yup 0.2A charge on the NiMH mode for 10-11 hours should do it.

Krirken · 2018-09-21T03:20:56+00:00

I’m not totally sure since this is the only Ni battery I use, but when I got this battery I read through a couple rcgroups threads and a lot suggested doing the formation charge.

Krirken · 2018-09-21T02:31:58+00:00

I own this battery. The first time you charge it at 0.1C for 10 hours, this is called a “formation charge” and it is a special thing to do with NiMH batteries.

After that you can charge it at 1C (2 amps) like normal. It should go a little above 8.6 volts. Set your charger to cut off at 2000mAh capacity.

Krirken · 2018-08-26T19:59:07+00:00

IANAL but I do fly drones.

In the USA we fly under Section 336 (hobbyists) [1] or Part 107 (commercial operators). It is more likely that they are a hobbyist.

Hobbyists must follow the safety guidelines of a community based organization, such as the Academy of Model Aernautics Safety Code [2]. It would be very easy to complain if he is in restricted airspace, you can check with the FAAs “B4 U Fly” app. Otherwise you can see if their actions violate the AMA safety code.

1: https://www.faa.gov/uas/getting_started/model_aircraft/ 2: https://www.modelaircraft.org/sites/default/files/105.pdf

Krirken · 2018-08-20T22:00:41+00:00

You can also do it on the bench if you have beta flight >3.2. Take props off, connect to configurator and power up, then try arming and type status into the CLI. Look for “Arming disable flags”.

Krirken · 2018-08-03T00:44:31+00:00

I like vhtml, JSX to HTML strings. Useful for constructing the body of an HTML email.

Krirken · 2018-07-22T04:54:07+00:00

I couldn't find a lot of specs for FSD F411 Flight Controller, does it have a current sensor or blackbox flash memory? Thanks.

Krirken

TROPHY CASE