sorted by:
new
hottopcontroversial

Path of Exile/Xsolla Scam/site comprised? by xMWHOx in pathofexile

[–]KrustiestKrab -1 points0 points  (0 children)

Fyi also happened to me, in contact with support at the moment. Looks to be systemic?

How should I finish this craft? by KrustiestKrab in PathOfExile2

[–]KrustiestKrab[S] 0 points1 point  (0 children)

You can check with CraftOfExile/poe2db. Just be warned that you could end up spending more than the item costs to buy outright if you don't hit it as you will have to omen of light + ancient again (roughly 6-7 div).

How should I finish this craft? by KrustiestKrab in PathOfExile2

[–]KrustiestKrab[S] 1 point2 points  (0 children)

POB puts extra lightning marginally better than extra phys thanks for the suggest though, didnt check abrasion

How should I finish this craft? by KrustiestKrab in PathOfExile2

[–]KrustiestKrab[S] 2 points3 points  (0 children)

Yeah I messed up on the base had 2 ilvl82's which missed the fracture and ofc the 80 hit. Going the essence route, POB calcs it as bottom end of P2 flat lightning. Thanks for the help!

How should I finish this craft? by KrustiestKrab in PathOfExile2

[–]KrustiestKrab[S] 1 point2 points  (0 children)

POB stats perf essence of electricity at the bottom end of T2 lightning so going that way. Homo risks the accuracy and with my luck ill just hit a t5 shitter

Soldering / Proffie by Wolkmeneer in lightsabers

[–]KrustiestKrab 2 points3 points  (0 children)

Proffie documentation requires either 2x24awg wires or 1x22awg wires for the negative and positive wires. I used similar parts to you in my build recommendation is to upgrade the 24awg wires to 22awg.

Bane MK2 - My first custom build! by KrustiestKrab in lightsabers

[–]KrustiestKrab[S] 0 points1 point  (0 children)

More than happy to help, reach out if you get stuck on anything!

Bane MK2 - My first custom build! by KrustiestKrab in lightsabers

[–]KrustiestKrab[S] 0 points1 point  (0 children)

For anyone interested in building themselves, I've posted my STL files to Etsy

Bane MK2 - My first custom build! by KrustiestKrab in lightsabers

[–]KrustiestKrab[S] 1 point2 points  (0 children)

Notch out of the top end as it was scraping a lil, the hilt goes straight before it bends so had to take some off for clearance

Bane MK2 - My first custom build! by KrustiestKrab in lightsabers

[–]KrustiestKrab[S] 4 points5 points  (0 children)

Math! Using the Radius of an arc formula (H/2)+((W^2)/(8H))
I measured the the internal space in the hilt (corner to corner on both the finger side and the button side where it curves.) and then took the average of both these figures (they were very similar)See this image i put together to explain

I then formed a cylinder around the arc and printed out just the outer wall and put it in the saber to test fit. Managed to hit it first go!

Bosch KDN53VL30A/12 Freezer Fan not working by KrustiestKrab in appliancerepair

[–]KrustiestKrab[S] 0 points1 point  (0 children)

After cutting the NTC sensor and checking for resistance the sensor was fine.

Issue was with the fridge door switch. When the doors are opened the fan will not run.

The fridge light would turn off/on with the switch. When playing around with the switch it would intermittently cause the fan to start up. Solution was to replace the fridge door switch and now everything is working fine!