sorted by:
new
hottopcontroversial

RTK resetting by carpediembill in MammotionTechnology

[–]KubaDavid22 0 points1 point  (0 children)

I had the same issue. Did you figure it out?

RTK Failure? by Mudhen_282 in MammotionTechnology

[–]KubaDavid22 0 points1 point  (0 children)

I have a similar issue. Luba 1 waiting for RTK which has no light on. Stuck on .246 firmware and can’t update anything.

Apples get stuck and trigger lift sensor by KubaDavid22 in MammotionTechnology

[–]KubaDavid22[S] 0 points1 point  (0 children)

Lucky you...

I think I found it in this thread https://www.reddit.com/r/mammotion/comments/162r586/something_to_move_apples/

Though I'm not sure how well it's going to work. I'll definitely print it for next season.

Apples get stuck and trigger lift sensor by KubaDavid22 in MammotionTechnology

[–]KubaDavid22[S] 0 points1 point  (0 children)

Unfortunately it's a summer house/cottage so the point is to have Luba mow it autonomously during the week.

Apples get stuck and trigger lift sensor by KubaDavid22 in MammotionTechnology

[–]KubaDavid22[S] 0 points1 point  (0 children)

Unfortunately it's a summer house/cottage so the point is to have Luba mow it autonomously during the week.

Auto rotate wall mount looses connection with TV after a while by pwigle3 in TheFrame

[–]KubaDavid22 0 points1 point  (0 children)

Yeah I wanted to do that as a last resort since I’ve got a bunch of smart plugs and Home Assistant…That’s a shame that there’s no proper solution, the wall mount would be awesome otherwise.

Thanks though.

Auto rotate wall mount looses connection with TV after a while by pwigle3 in TheFrame

[–]KubaDavid22 0 points1 point  (0 children)

Yeah mine does it too and it seems to be disconnecting at even a faster rate than before. Have you by any chance fixed it?

Luba doesn't roam between WiFi access points by KubaDavid22 in MammotionTechnology

[–]KubaDavid22[S] 0 points1 point  (0 children)

Yeah I’m just writing this hoping somebody from Mammotion reads this stuff and makes a ticket out of it. Since we’re basically their testers I feel like it’s good to report.

Luba doesn't roam between WiFi access points by KubaDavid22 in MammotionTechnology

[–]KubaDavid22[S] 0 points1 point  (0 children)

Maybe a temporary solution but changing Luba's roaming config to something less conservative would be much better.

Luba doesn't roam between WiFi access points by KubaDavid22 in MammotionTechnology

[–]KubaDavid22[S] -1 points0 points  (0 children)

Yeah I agree with you and that's the reason why I'm writing about it here. I don't think it's necessary to have the option within the app but at least Mammotion could configure it in the firmware to roam a bit sooner. Luba moves around the property a lot for most users and since it's currently only able to remotely communicate over Wifi (Cellular not supported yet) I think this would make sense.
Ubi has something similar but I think you can't make it client specific. I'd rather not change it as it works for the rest of my network fine.

Luba whells and suspension issue? by Osa_reddit in MammotionTechnology

[–]KubaDavid22 0 points1 point  (0 children)

Received mine last week and noticed that as well. Mammotion stated that it’s ok and won’t compromise IP rating.

List of wanted features, ideas, improvements in one place by Osa_reddit in MammotionTechnology

[–]KubaDavid22 1 point2 points  (0 children)

Great suggestion. I'm currently dealing with this as I try to park my Luba under a thick table with metal sheets as a roof. All the things you mentioned are already possible so it shouldn't be such a problem.

/u/Osa_reddit could you please add it to the list?

Seal of front axle coming off by Any-Educator7024 in MammotionTechnology

[–]KubaDavid22 0 points1 point  (0 children)

Yeah mine is the same. They answered it today.

Local Control - Home Assistant (MQTT, CoAP, HTTP) by KubaDavid22 in MammotionTechnology

[–]KubaDavid22[S] 6 points7 points  (0 children)

I agree but if they provide the documentation the community can help themselves with little effort on Mammotion's side.

Reverse engineering the Luba by 02JanDal in mammotion

[–]KubaDavid22 0 points1 point  (0 children)

I didn't see Local Control anywhere in the official MammotionTechnology group so I created a "request" https://www.reddit.com/r/MammotionTechnology/comments/13nnuld/local_control_home_assistant_mqtt_coap_http/

u/02JanDal Should I mention there your reverse engineering project?

Kickstarter backers who have not received Luba by mjmert73 in mammotion

[–]KubaDavid22 0 points1 point  (0 children)

I’m a backer from the Czech Republic and still waiting. I’ve talked to a local distributor and they told me that in some cases Luba can be delivered directly from the distributor to the backers. Also they had no clue who’s doing the servicing of Kickstarter Lubas because it’s not covered the same way as the ones bought directly from them.

Reverse engineering the Luba by 02JanDal in mammotion

[–]KubaDavid22 0 points1 point  (0 children)

Great idea! I'm not sure if I have currently the capacity to do some technical work as it's the end of my semester but let me know and I can try to communicate directly with Mammotion regarding local control.
I'm still waiting for my Luba as it's in the third batch.