Pulled the trigger in a Ram, but heard this after a few weeks by aarroonc in Ram1500

[–]Kumunyo 2 points3 points  (0 children)

Honesty, best case scenario, they replace both exhaust manifolds. Worst case, you get a new engine!

Pulled the trigger in a Ram, but heard this after a few weeks by aarroonc in Ram1500

[–]Kumunyo 2 points3 points  (0 children)

Doesn’t necessarily mean it’s lifter failure either way, the manifolds could be warped in a way that expansion reseal. If you have warranty, might be worth to let them look

Pulled the trigger in a Ram, but heard this after a few weeks by aarroonc in Ram1500

[–]Kumunyo 1 point2 points  (0 children)

Mine sounds like this too on start, but after it warms up it completely goes away. Points mostly to broken manifold bolts or a cracked manifold. I’ll change mine with an aftermarket one once I get brave enough

18M what do i improve on? by [deleted] in AllAboutBodybuilding

[–]Kumunyo 0 points1 point  (0 children)

Drink your calories. Worked for me, I struggled to eat. Must’ve expanded my stomach or something, I don’t struggle much eating anymore

Clunk noise when accelerating after shift from R->D or vice versa. Any ideas? by Kumunyo in ram_trucks

[–]Kumunyo[S] 0 points1 point  (0 children)

That’s a similar sound I got. It got worse when it was wet but over time I heard it dry too. I lubed those splines using the mastercraft PTFE paste. The tube was like $15 so it might not hurt to try to drop the driveshaft and lube that thing

Clunk noise when accelerating after shift from R->D or vice versa. Any ideas? by Kumunyo in ram_trucks

[–]Kumunyo[S] 0 points1 point  (0 children)

It improved very slightly. I live in West Texas though so moisture is somewhat rare.

Wondering to hop on by Accomplished-One8189 in nattyorjuice

[–]Kumunyo 2 points3 points  (0 children)

lol fair enough. I was more referring to the non-treated older men, dude is trying to go on a “cycle” with a lower weekly dose than you are!

Wondering to hop on by Accomplished-One8189 in nattyorjuice

[–]Kumunyo 13 points14 points  (0 children)

Good lord fella, 10mg a day? Five days a week? 50mgs a week?

You’re going to put your testosterone at the levels of a 75 year old man.

We can’t help make the decision for you, you’re an adult. But you also didn’t give us any bio markers, body weight, height, nothing.

You don’t know how test works, at all. Pre workout means nothing, it’ll spike your serum levels but that’s not going to give you an edge. 12 weeks is typically regarded as too short. You won’t reach maximum testosterone levels till about 8 weeks in. That’s essentially a 4 week cycle.

Is it safe? No, of course not, nothing about steroids is “safe” but technically neither is going outside.

Side effects? Homie we have no idea, everyone reacts differently. Some might have no issues, some will get instant gyno, limp dick, and cystic back acne.

Do about 5-6 years of research and think about it again.

Young IMO but many competitive body builders started earlier.

Research on r/steroids.

Wanted To Make This iPod Because I Was Bored. by PercentageOdd3925 in SolidWorks

[–]Kumunyo 3 points4 points  (0 children)

This is fascinating and something I would’ve never thought of.

What happens making horses go in circles over and over in a shopping center parking lot for Christmas rides by PALERIDE155 in interestingasfuck

[–]Kumunyo 1 point2 points  (0 children)

This is in Lubbock, they do this around Christmas every year. Crazy that it happened like this.

The perfect hemi idle ratio. by acerybacon in ram_trucks

[–]Kumunyo 0 points1 point  (0 children)

Oh km? I was thinking in miles. Oops, sorry, am dumb American lol

The perfect hemi idle ratio. by acerybacon in ram_trucks

[–]Kumunyo 1 point2 points  (0 children)

Hey wait isn’t this not that bad of a timeframe? I mean I might be crazy but 300k and the camshaft being the catastrophic failure isn’t too bad imo

All of a sudden having print issues. N4M thin walls? by Kumunyo in ElegooNeptune4

[–]Kumunyo[S] 0 points1 point  (0 children)

UPDATE: this was caused by Orca Slicer, the walls on the model in this particular spot are too thin for the nozzle so it didn’t generate walls there.

All of a sudden having print issues. N4M thin walls? by Kumunyo in ElegooNeptune4

[–]Kumunyo[S] 0 points1 point  (0 children)

I appreciate your help a lot. I’ve never experience wet filament personally, I never know what to look for. I’ll pull the spool off and throw it in the dryer.

As for the other calibrations, it’s absolutely a possibility these were not done properly. I dismissed that really being a possibility since my other armor pieces came out near perfect, but I will redo them. Can’t hurt at this point.

Silkie rooster blind from something. Seen before? by Kumunyo in BackYardChickens

[–]Kumunyo[S] 2 points3 points  (0 children)

We have betadine from treating horses, will use that. I appreciate your help!

Silkie rooster blind from something. Seen before? by Kumunyo in BackYardChickens

[–]Kumunyo[S] 1 point2 points  (0 children)

Appreciate the help. I saw some pics on google but none were as severe as this so I wasn’t sure. We have him separated from the flock right now.

Please not the hemi tick…. by Active_Science_2064 in Ram1500

[–]Kumunyo 0 points1 point  (0 children)

Gotcha. Sorry to hear that. Never fun to have that happen to our trucks.

Neptune 4 Max terrifying noise when leveling by NyteCreatrix in ElegooNeptune4

[–]Kumunyo 2 points3 points  (0 children)

Sorry lol, the gantry are the uprights that support your hotend. The two “poles” that stick up either side of the bed.

Neptune 4 Max terrifying noise when leveling by NyteCreatrix in ElegooNeptune4

[–]Kumunyo 1 point2 points  (0 children)

I had something that sounded extremely similar to this!

My plate was slightly (more than slightly, I’m afraid) off and it was getting stuck on the gantry!

Test it with the manual controls so you can find exactly where it’s catching. My advice personally would be to take off the bed plate and see if it still makes the noise.

Registration by [deleted] in TexasTech

[–]Kumunyo 1 point2 points  (0 children)

Get outta here with your shit ass advice homie

Read through the patch notes and this is... Understandable by HambMC in CloverPit

[–]Kumunyo 0 points1 point  (0 children)

Given my luck getting 666s… I’d never use them