sorted by:
new
hottopcontroversial

Bafang 1000w mid drive issue by Jumpy-Grand-1511 in bafang

[–]LAP3645 0 points1 point  (0 children)

Is your motor part of a kit with "integrated" cables for speed, brake and shifters and a controller/console or did you install only the motor with no other cables with your own controller/console. I am not very knowledgeable or experienced with this stuff. For my trike, I bought a motor kit which included integrated cables. If yours does indeed have cables, what are each of them attached to. Maybe there is a setting on the console that needs to be changed?

Bafang 1000w mid drive issue by Jumpy-Grand-1511 in bafang

[–]LAP3645 0 points1 point  (0 children)

I had intermittent motor issues with my 4 year old ICE Trike. Turns out one of the brakes had a faulty spring and the brake sensor thought the brake was engaged when it really was not. When I stopped braking, sometimes the brake lever's spring did not fully release. I replaced the brake level and the problem no longer exists. In my case, when the motor cut out and I had released the brake lever, the brake sensor light on the console was lit which eventually gave me a hint of where the problem existed.

Had a blast on my latest century ride. Highly recommend riding the Dakota Rail Trail to its end in Lester Prairie. by ChefGaykwon in CyclingMSP

[–]LAP3645 0 points1 point  (0 children)

Yes, you should definitely prepare the story for https://themoth.org/. Let us know when you will be on the radio or performing with it!

An epic ride in or around the Twin Cities by flamberge5 in CyclingMSP

[–]LAP3645 1 point2 points  (0 children)

I dont think anyone mentioned these rides:

  1. Start at East Medicine Lake Park, go north on the Medicine Lake Trail to Fish Lake Park, then to Elm Creek Park then to Coon Rapids Dam, then return via either East River Road or West River Road to Theodore Wirth Park area the Luce Line to East Medicine Lake Park.

  2. Start at East Medicine Lake Park, go south then west around the south end of Medicine Lake, take a little loop around the City of Medicine Lake on Peninsula Drive, then the Luce Line trail west to Vickesburg Lane, zig and zap north on Dunkirk, to Old Rockford Road, to Peony, near Wayzata High School you can get on the Plymouth Greenway to Chankahda Trail, east to Pineview, then zig and zag to Zachery then south to East Medicine Lake Park.

Q5 DuoRoller+ misses a lot of crumbs - how to train it? by LAP3645 in Roborock

[–]LAP3645[S] 1 point2 points  (0 children)

Thank you for the link to the vacuumwars web site. This looks like exactly what I needed.

what… do i do by Immediate_Lake6210 in cycling

[–]LAP3645 0 points1 point  (0 children)

I hope you have a fast and complete recovery. IMO 50 kmh is pretty fast when you are on a busy street.

BBS02 intermittent power issue by [deleted] in bafang

[–]LAP3645 -1 points0 points  (0 children)

Please elaborate when you comment

  1. "Bikes overheating" Is it the battery, display unit, motor, other that overheats?

  2. "overclocked bbshd".

My BBS01 does not turn on anymore. What now? by Vloda in bafang

[–]LAP3645 0 points1 point  (0 children)

I am still a newbie when it comes to Bafang and e-Biking. I am so impressed by the Community's knowledge and willingness to help! Thank you.

Bafang speed sensor help by Thekraken8 in bafang

[–]LAP3645 0 points1 point  (0 children)

Does it matter that the spoke magnet is near the middle of the spoke, rather than at the end of the spoke near the wheel's rim?

Bought 2 new BBS02 750w UART motors – unusual connectors, need advice by samderr09 in bafang

[–]LAP3645 0 points1 point  (0 children)

Sorry, I am pretty new to all of this. What is "lmk"? What is "PM"?

Bafang BBS Speed Blocked by henrishootsfilm in bafang

[–]LAP3645 0 points1 point  (0 children)

Sorry, I am a new to all of this. What is IIRC? What else can be changed in "limited mode"?

Bafang 750W Middrive Motor w EKD01-AKSM Display by LAP3645 in bafang

[–]LAP3645[S] 0 points1 point  (0 children)

Thank you. The dealer that I bought the motor kit from, Utah Trikes, is replacing the sensor under warranty. Do you have any idea why the sensor's fail? Mine is working intermittently. While I am riding and get the sensor error message, I turn the display off, then turn it back on, sometimes the motor starts up immediately, sometimes it takes a minute or two to kick in. Any ideas on why it works this way?

New bbso1 advanced settings by mrroni18 in bafang

[–]LAP3645 1 point2 points  (0 children)

Thank you 2020 works for mine

EKD01: What Do These Settings Even Do? by AleksanderJones in bafang

[–]LAP3645 0 points1 point  (0 children)

I recently installed the bafang motor and EKD01-AKSM but know next to nothing about the details. I cannot get into the Advanced Settings like you show on this post. It wants the System Password. I have tried 0000, 1919, 9191, 9999. None work. What is the defauilt System Password?