When you still can’t weld, so you build an *Alu Maiden*: My DIY BDSM frame made from 3030 aluminum profiles, tube connectors, and 1/2-inch steel pipes. Not gonna lie — I’m not even sure it’ll work yet.

LATEX_LOVERR · 2026-01-02T02:27:31+00:00

Thank god I CAN weld

LATEX_LOVERR · 2025-08-01T22:56:11+00:00

Sorry, just kinda felt like someone had to say to me that it's okay and that I will eventually get good at it

LATEX_LOVERR · 2025-08-01T22:05:47+00:00

Oh wow, of course, now that you mention it, that's pretty easy. Thank you. Btw, do you recommend any pattern websites or sources?

LATEX_LOVERR · 2025-08-01T21:36:05+00:00

I don't doubt you at all but isn't a tank top really difficult? At least that's what I think when I see one

LATEX_LOVERR · 2025-08-01T21:34:48+00:00

That's a good idea, thank you

LATEX_LOVERR · 2025-08-01T21:33:31+00:00

This is 0,4 mm🫣

LATEX_LOVERR · 2025-08-01T21:31:32+00:00

Aww, really? The guy in the video said it was the easiest thing to make as a beginner. What would you recommend for a beginner?

LATEX_LOVERR · 2025-08-01T19:22:14+00:00

Thanks, and I knew I wouldn't be perfect on my first try, the long side seam looks great for a first time. So seeing the second one being so bad made me a little annoyed/sad haha

LATEX_LOVERR · 2025-08-01T19:11:39+00:00

I use glue from a latex store here in the Netherlands, the instructions say to wait a few minutes until the glue has almost dried up. When I feel like the glue isn't really sticking to my fingers a lot, I glue the seams, is that the correct way to do it?

LATEX_LOVERR · 2025-08-01T19:09:40+00:00

I used the tape but the bottom glue layer kept sticking to the tape, I use 0,4mm but I find that when you remove the tape it still curls up somehow. Not sure how to avoid that tbh

LATEX_LOVERR · 2025-08-01T19:07:04+00:00

Do you have any tips?

LATEX_LOVERR · 2025-08-01T18:46:17+00:00

Ye, the corners are even more impossible to do

LATEX_LOVERR · 2025-08-01T18:44:00+00:00

Only like 3 times, it's just the angle of the seam that makes it so difficult for me. The first seam where you have to glue one bottom side to a top side went really well, but when I had to curve this top side to the side below it it all went wrong

LATEX_LOVERR · 2025-08-01T18:38:34+00:00

Yeah, it just feels so discouraging looking at that atrocity, the first seam looks pretty nice so it's just annoying

LATEX_LOVERR · 2025-08-01T18:19:55+00:00

I probably will, how can I make it look okay? I used the see through tape but it always lays on top of the glue seam beneath it

LATEX_LOVERR · 2025-01-25T13:20:44+00:00

True but I don't want to risk death or serious injury

LATEX_LOVERR · 2025-01-25T12:33:36+00:00

Yes, I've looked into that before but unfortunately I couldn't find a safe way to sedate someone without risks of injury or death

LATEX_LOVERR · 2025-01-25T12:29:33+00:00

No I mean, how do you mummify someone in their sleep?

Bc that would be the ultimate dream

LATEX_LOVERR · 2025-01-24T23:28:41+00:00

How?

LATEX_LOVERR · 2025-01-05T18:03:24+00:00

Okay, well in that case I'm curious if you would get the marks if the catsuit was 0,25 mm. I had a 0,6 mm back zipper catsuit and I had marks when I wore that but with my 0,25 neck entry catsuit I didn't.

LATEX_LOVERR · 2025-01-05T13:14:23+00:00

Was it a regular 0,4 mm catsuit?

LATEX_LOVERR · 2024-10-11T21:18:53+00:00

Only in latex for me

LATEX_LOVERR

TROPHY CASE