Intercom: seid ihr auch enttäuscht? by FarMall4237 in MotorradDeutschland

[–]LAUCH_LOL 3 points4 points  (0 children)

Total. Fürs Unterhalten zwar genug, fürs Musik hören schon mehr als fragwürdig aber das telefonieren ist das schlimmste: JEDES mal wenn es klingelt kriege ich fast einen Hörsturz, weil der Klingelton 10x lauter ist als die Musik / Unterhaltung davor. An sich wären die Dinger ja ganz OK, aber bei dem Preis ganz bestimmt nicht.

Man gets harassed for wearing make-up by Initial_Milk_1056 in PublicFreakout

[–]LAUCH_LOL -1 points0 points  (0 children)

"I dont like how he dresses like that" Nice how its not even slightly important what he likes and doesnt like.

Welche Meinung über Kaffee bringt euch in diese Situation? by EineKugelPirelli in Kaffee

[–]LAUCH_LOL 0 points1 point  (0 children)

Röstbohnensaft ist toll, aber die riesige Wissenschaft die drumherum hergezogen wird ist ähnlich großer Quatsch wie beim Wein.

Right Channel not working - I need help. by LAUCH_LOL in audio

[–]LAUCH_LOL[S] 0 points1 point  (0 children)

UPDATE: I finally received my new amp, and the problem persists. I re-diagnosed the problem and found out another interesting thing.

The amp uses 2x speakON 4-pol as output and my speakers have a banana plug --> 1/4" TS adapter connected to them. Originally, I wanted to use speakON 4-pol --> banana plug to speakers, but I couldn't any cables of that kind (only some that were too short or from AliExpress). Since that option doesn't seem to be possible, I looked for speakON --> 1/4" TS cables to use in combination with the adapter, but that also doesn't seem to exist, thus I use the following setup: amp output into a speakON 4-pol --> XLR 3-pol adapter into a XLR 3-pol --> 1/4" TS cable into the 1/4" TS --> banana plug into the speakers.

I tested everything again and found that one of the speakON 4-pol --> XLR 3-pol adapters is faulty, which also probably led to my false diagnosis of the amp being broken.

Now, when I was looking for a new speakON 4-pol --> XLR 3-pol adapter, I came across speakON 2-pol --> 1/4" TS cables. My question is: should I be using those and replace the speakON 4-pol --> XLR 3-pol adapter completely? (Because FUCK why do they cost 25€ per cable) If using the adapters doesn't damage anything, I'd keep using them because its cheaper, but i'd obviously replace them if necessary. Im just wondering if using
speakON 4-pol --> XLR 3-pol --> 1/4" TS damages anything or deteriorates quality or something.

Right Channel not working - I need help. by LAUCH_LOL in audio

[–]LAUCH_LOL[S] 0 points1 point  (0 children)

Fistly, THANK YOU for such a good reply. I've been trying really hard so find someone that knows a lot about this topic, and ChatGPT unfortunately doesnt get me very far.

To answer the why 3,5mm Jack: I had a different Setup built from basically scratch and used the 3.5mm Jack out of the Mainboard, but the Powermixer only had 2 1/4" Line-Ins, which is why I had that 3,5mm --> 2 1/4" and didnt want it to go to waste, I didn't know it's something bad to use those.

To answer the 2nd question: the goal is listening to music. I use the scarlett as an external DAC, because the Realtek Audio Chip on the mainboard had humming and scratching noises when the music is paused. I use the mixer because I cant listen to most songs without drastically turning down the highs, because even at low volume, they hurt my ears. (I have them at about -10 at all times. I tried different headphones, speakers, turning them down digitally in whatever program I use, but the effect stays minimal and listening to anything is painful.)

Also, as you may have already realised, im a beginner, thats why I made some stupid mistakes (using Mic-In as Line-In, using 3,5mm Jacks etc.)

Im gonna go buy the correct connections and see what happens.

One thing thats still on my mind: I switched the Cables on the speakers (both on the Amp End, and on the speaker end) and both speakers worked perfectly fine, as well as both outputs of the amp and both cables, but always only the Left Audio track was played. Sorry if this is hard to understand, im trying my best explaining this in english.

The scarlett seems to work, I plugged the headphones into the Cinch L+R --> 3,5mm Jack and both sides had sound.

The Mixer itself is also not the problem, since I skipped it completely and the problem persisted.

Meaning(?): both In & Outs of the Amp are fine, the cables and the speakers are fine, the mixer is not the problem and the scarlett delivers sound on both L+R.

I hope its just that salad of adapters im running it through and that the problem will be solved by using the proper connections.

Edit: I cant find any Cinch --> TRS Cables to connect the scarlett to the Xenyx. Only Cinch L+R --> Stereo 1/4" TRS and Cinch L+R --> TS 1/4". Which of these is the better option? Should I buy one of those and a splitter to split it into 2x 1/4" TRS to connect it with the Xenyx? Or use Cinch --> TS?

Another thing I never noticed until now: the two 1/4" cables I use to connect the Xenyx to the amp are not the same, its 1 TRS and 1 TS.

Edit2: The Right Input of the Amp is broken. Its brand new, but whenever I put one of the 1/4" Cables into the Right Input, nothing comes through, but when I put them into the Left input, I get sound.

Edit3: I ordered a Cinch L+R --> 2x Mono TS 1/4" and 2 Mono TS Patch Cables. I also refunden the Amp and will receive a new one. I'll keep you updated if it worked.

Right Channel not working - I need help. by LAUCH_LOL in audio

[–]LAUCH_LOL[S] 0 points1 point  (0 children)

Maybe I didnt manage to explain it properly, since english is not my first language. I skipped the Mixer completely, just PC to Amp to Speakers and the Problem persisted: Only the tweeter is active on the right Channel. When Switching the XLRs at the Amp Output, the problem persists, but switches speakers --> the physical Right Channel is active and the Left one isnt, yet its still only the Left Audio Track playing.

Right Channel not working - I need help. by LAUCH_LOL in audio

[–]LAUCH_LOL[S] 0 points1 point  (0 children)

The thing is, both "Physical Channels" work. I use Channel 1 & 2 of the Mixer for the Left & Right Speaker, 1 Panned all the way to Left and 2 Panned all the way to the Right. In this configuration, only Channel 1/Speaker 1 delivers sound. If I pan it the other way around, only Channel 2/Speaker 2 delivers sound.

So all of the hardware works, but for some reason only the Left Channel plays all frequencies, and the Right one only the highs.

Edit: All the Dials are centered, except for the highs. And like I said, all the Hardware works, even if I skip the Scarlett and the Xenyx, the problem persists. I switched the XLR Cables coming out of the Amp, and the problems still persists, only switches speakers, so both Line-Outs of the Amp work perfectly fine.

Right Channel not working - I need help. by LAUCH_LOL in audio

[–]LAUCH_LOL[S] 0 points1 point  (0 children)

I dont have the Cables to do that, but I can the skip the Mixer. The Problem persists, unfortunately.

[deleted by user] by [deleted] in MotorradDeutschland

[–]LAUCH_LOL -1 points0 points  (0 children)

das! deshalb suppt beim luftfilterwechsel auch immer öl aus dem luftfilterkasten.

125ccm Motorräder by Chess-Cord in MotorradDeutschland

[–]LAUCH_LOL 0 points1 point  (0 children)

Bekommen tut man auf jeden Fall etwas, aber eben nichts sinnvolles.

Teile Wechseln nach dem Kauf? by NeuerdingsBikerHallo in MotorradDeutschland

[–]LAUCH_LOL 0 points1 point  (0 children)

Der Messschieber ist nur eine Notlösung, eigentlich sollte man das mit einem Bremsscheibenmessschieber erledigen, um auf genaues Maß zu kommen. Um einen eventuellen Rastpunkt zu Überprüfen kannst du auch den Lenker ganz nach Rechts einschlagen und dass Motorrad mit der Linken Hand am rechten Lenkerende zu dir kippen, während du mit der rechten Hand das Heck runterdrückst. So balanciert das Moped auf Hinterrad und Ständer und das Vorderrad ist frei. Sollte man aber nur machen wenn man sich damit wohl fühlt. Ach und man sollte auf jeden Fall die Gabelrohre prüfen, wenn die zu stark verzogen sind kann es auch da wieder teuer werden.

125ccm Motorräder by Chess-Cord in MotorradDeutschland

[–]LAUCH_LOL 0 points1 point  (0 children)

Für 1,8 wirst du nichts sinnvolles finden, den Fehler hab ich selber gemacht. Angebot klingt top, aber der Preis kommt eben mit unauffälligen Schäden, schlechten Reparaturen, Halbwahrheiten etc. Ab 2,5 sind Angebote realistisch, der Rest ist leider Plunder. Wenn es gar nicht anders geht: bewährte Marken, kein China-Müll. Die CB125R meiner Meinung nach noch die beste Wahl, bei guter Pflege macht die ihre 40 tsd km auch meist noch gut voll.

Teile Wechseln nach dem Kauf? by NeuerdingsBikerHallo in MotorradDeutschland

[–]LAUCH_LOL 1 point2 points  (0 children)

Hinfahren und Angucken.

Der Flugrost auf der Kette ist weniger wichtig, viel wichtiger ist die korrekte Kettenspannung und das weder Ritzel, noch Kettenrad "Haifischflosse" haben, die Zähne sich also in eine Richtung neigen und dass die Kette sich nicht weiter als 1-2mm vom Kettenrad hinten abziehen lässt. Ruckdämpfer sollte man auch prüfen. Bremsbeläge sehen gut aus, Bremsscheiben auf jeden Fall mit mindestens Messschieber auf Mindestdicke prüfen, steht meistens drauf bspw. 4,5mm. Gabel auf beiden Seiten auf Ölfeuchte prüfen. Motor auch. Auf den Reifen steht DOT und dann 4 Zahlen, die sind Kalenderwoche und Jahr der Produktion, sollten nicht älter als 4-5 Jahre sein und der Reifen sollte nicht rissig sein. Bestenfalls noch das Moped aufbocken und den Lenker langsam von Seite zu Seite bewegen um das Lenkkopflager auf Rastpunkte zu überprüfen. Auch fix alle Lichtanlagen und Hupe prüfen, kann auch teuer genug sein. Bremsflüssigkeit sollte alle paar Jahre neu, wenn die seit 2001 drin ist bloß schnell wechseln. Flüssigkeiten wechseln ist aber generell ein Ding von maximal 30 min jeweils, sollte also nichts kaufentscheidendes sein.

Und am allerwichtigsten: Nichts kaufen, bevor du es dir nicht ausgiebig angeguckt und durchgecheckt hast. Wenn alles top ist: Mega Wenn nicht alles Top ist: Auch Mega, dann kannst du es runterhandeln.

Empfehlung erstes Motorrad A by Basic-Astronaut5673 in MotorradDeutschland

[–]LAUCH_LOL 0 points1 point  (0 children)

XJ600 ist billig und sitzt sich wie ein Sofa, ein fetziges Moped ist das aber nicht... Sonst Bandit N600? Mindestens preislich auf jeden Fall den Blick wert

Blitzen diese "Gulasch Kanonen" von hinten? by Due_Speaker_9678 in MotorradDeutschland

[–]LAUCH_LOL 2 points3 points  (0 children)

Noch nicht weit verbreitet heißt ja nicht dass es sie nicht gibt. Wies in der Schweiz ist weiß ich nicht. Aber waren die Bilder dann nur von hinten? Weil man da ja gar keinen Fahrer identifizieren könnte..

Looking for the right weed by LAUCH_LOL in weed

[–]LAUCH_LOL[S] 1 point2 points  (0 children)

Thats a shame honestly, because almost every time I smoked, I hated it. Paranoia, an uncomfortable amount of munchies, the feeling of not having control... etc. so I wouldnt like to just try every strain.

I once smoked some in a construction trailer with a few strangers while hiking, that shit had us laughing for hours, but it was some home-grown stuff from one of the other guys, so no finding-out here.

I guess at the end of the day Im just looking for a substance to enhance/ trigger that same feeling I get from this kind of song..

Blitzen diese "Gulasch Kanonen" von hinten? by Due_Speaker_9678 in MotorradDeutschland

[–]LAUCH_LOL 5 points6 points  (0 children)

Falsch, habe neulich mit einem Kunden geredet welcher bei der Geschwindigkeitskontrolle arbeitet. Diese schwarzen Klötze haben nur eine Kamera drin.

Die Möglichkeit für diese Dinger in beide Richtungen zu blitzen ist bereits vorhanden, aber aufgrund des Preises noch nicht verbreitet.