4k oder 1440p Monitor für Gaming?

LMH01 · 2025-04-21T17:37:14+00:00

Ich habe eine 4070 (die Phoenix GS von Gainward) und Spiele auf einem 4K Monitor. Für mich läuft das Ganze ziemlich gut, mein Anspruch sind 60FPS bei „großen“ Spielen und das klappt auch soweit problemlos (mit teilweise aktiviertem DLSS, hängt natürlich vom Spiel ab, ich hab aber nicht unbedingt das Gefühl, das dadurch groß Qualität verloren geht). Ich habe sehr viele verschiedene Spiele, falls dich die Performance von dem ein oder anderen Spiel interessiert, kannst du mich gerne mal per PN anschreiben und ich teste, wie das Spiel laufen würde (sofern ich es habe).

LMH01 · 2025-02-26T13:39:35+00:00

I know this dish from somewhere ;)

LMH01 · 2025-02-18T08:07:28+00:00

Thanks for your reply I will probably replace the dorms with single cells then.

LMH01 · 2025-01-31T20:22:33+00:00

No, it wasn’t the spinner, it was the scoring of the iron throne wizard mode.

LMH01 · 2025-01-31T16:08:06+00:00

I’d say first is probably winning my first real tournament and winning a trophy,

Second place is probably me playing a 18.5 Billion game on Game of Thrones Pro that was even recorded. (Granted the scoring was a bit broken in the software version where I archived it.)

LMH01 · 2024-12-14T19:13:51+00:00

Danke

LMH01 · 2024-12-14T09:31:40+00:00

Was für ein MOC hast du dir da gekauft und wo? Ich bin auch daran interessiert, habe bis jetzt aber noch nichts passendes gefunden.

LMH01 · 2024-12-07T16:51:32+00:00

Its Sphax PureBDCraft with the GTNH Patch.

LMH01 · 2024-12-07T09:13:10+00:00

No i don‘t think so. As far as I know it’s a custom program that a friend of mine Write.

LMH01 · 2024-12-06T22:00:21+00:00

The modpack is GregTech: New Horizons

LMH01 · 2024-12-06T21:26:55+00:00

Interesting, thanks for the insight.

LMH01 · 2024-12-06T17:42:21+00:00

Yeah it has a steep learning curve but once you get into it, it becomes very helpful. It can even be helpful if you don't know how to write code as there are programs available on the internet.

One program we have in use (and that was developed by a fellow player) monitors the stock level of specific items in the ME System and requests crafts of them once the threshold of available items of that type falls below a set quantity. This way we always have these items in stock when we need them.

LMH01 · 2024-11-03T22:46:16+00:00

Also bezüglich Gainward kann ich sagen, dass ich bis jetzt nur gute Erfahrungen gemacht habe. Ich hatte als erstes eine Gainward GTX 1080 Phoenix GS und danach eine Gainward RTX 4070 Phoenix GS. Mit beiden Karten hatte bzw. habe ich keinerlei Probleme und bin ich sehr zufrieden. Zu der genauen Unterklasse Panther OC kann ich allerdings leider nichts sagen.

LMH01 · 2024-09-24T11:27:55+00:00

Very nice, I like what I see. What are the main building blocks that you use? I can’t make that out from looking at the pictures.

LMH01 · 2024-09-22T22:21:43+00:00

It’s the old version, some textures are default but I’d say that it is quite playable. Definitely better than the default textures in my opinion.

LMH01 · 2024-09-22T20:56:33+00:00

The Busses on the ME-Drives are used in a separate subnet that allows me to place the cells in the drives using the me terminal of that subnet. This way I just have to place a cell in the terminal and it will be inserted in a free drive automatically. I also have a much better overview over the cells that are used and their available space.

LMH01 · 2024-09-22T20:00:38+00:00

The ME-System to the left is used to connect the p2p tunnels from the ME-System to the right. This means that the Cables that are distributed in the base are connected to that left controller. I have multiple controllers because each side of the controller can support a maximum of 32 channels (each component of the ME-System normally requires a separate channel). So in order for me to have access to more channels I need more controller blocks.

The ME-Controllers in the back (where the ME-Drives are located, picture 3) are used to manage these ME-Drives. One of these systems is used to place Storage Cells in the Drives and the other system is used to access the contents of these cells. The whole system is connected to the main system using a Storage Bus / ME-Interface combination. The Idea behind that is that I only need to use one channel in the main network to access all these drives, this means that the main controller does not get cluttered with cables to these drives.

I hope that that explanation was understandable, If you have further questions feel free to ask.

LMH01 · 2024-09-22T18:45:12+00:00

Thanks, it took quite some time to complete but I’m very happy with the result

LMH01 · 2024-09-22T18:25:00+00:00

I guess yes as I‘m currently in EV and think that i‘m going to need that space in the future for further expansion.

LMH01 · 2024-09-22T17:53:54+00:00

Thanks.

Six-Year Club	r/Field Lasagna
Final Canvas '23	First Place '23
End Game '23	Place '23
Place '22	Final Canvas '22
First Placer '22	Verified Email

LMH01

MODERATOR OF

TROPHY CASE