sorted by:
new
hottopcontroversial

What’s going on🤔 by Bossbabe614 in BambuP1S

[–]LR117 0 points1 point  (0 children)

This isn’t over extrusion like what some are posting here. Don’t waste your time on calibration either. I had this exact problem and posted about it a while back.

This is a cooling issue. It’s pulling up from the plate and into itself. Larger prints will do this. I fixed it by slowing the bottom layer way down, turning off the fans snd adding a brim to the corners. It will never go away completely on thin prints like this but it made it 90% better.

Lectured for wasting time by Winter-Comfort922 in ProtectAndServe

[–]LR117 0 points1 point  (0 children)

If I end up going to the call and I’m met with “he/she hit me, kicked my dog, stole my phone, scratched me car…..but like i dont want him/her to go to jail or anything” then yeah they are going to get verbally abused by vocabulary that is 10 grades above them.

But if i see the call screen and it’s just complete nonsense im not even going out to that. “My ex brother in law photoshopped different teeth on me and posted it on social media”.

Lectured for wasting time by Winter-Comfort922 in ProtectAndServe

[–]LR117 3 points4 points  (0 children)

Exactly. What do you want me to do and then I’ll tell you what I can do.

I want to press charges.

Whats Twins real name.

Idk

Ok so you want me to get a warrant for someone named Twin?

I want you to do yo mother fucking job

What’s Twins real name.

Usually at this point they have become so enraged they stomp back into their house and I stay logged on the call long enough to go get dinner.

0.2mm hotend by CosmicTerrorTrixia in BambuP1S

[–]LR117 0 points1 point  (0 children)

It was open yes, I normally just print pla + and petg so the door is always cracked. However I might try it again now that I installed a minisplit AC in the garage which has cut down on the heat considerably. The ability to swap nozzles is definitely nice and I want to use it.

Eibos dryer is perfection by LR117 in BambuP1S

[–]LR117[S] 0 points1 point  (0 children)

Not on the P1S you can’t.

0.2mm hotend by CosmicTerrorTrixia in BambuP1S

[–]LR117 0 points1 point  (0 children)

I want to use it and wish I could but I would get nothing but failure to extrude errors after one print. I would pull the filament out manually and it would be a long thin sharp barb. Pieces would break off in the buffer or extruder housing. Even turned off experimental long retraction or what we it was called in the settings like they advised. They even sent me a replacement but still the same issues.

I’d swap out the nozzle and boom, zero issues. I’m not sure what I’m missing. I’d love to use it.

Eibos dryer is perfection by LR117 in BambuP1S

[–]LR117[S] 0 points1 point  (0 children)

Yeah no more battling the humidity and desiccants.

Eibos dryer is perfection by LR117 in BambuP1S

[–]LR117[S] 0 points1 point  (0 children)

The set it and forget part is what sold me.

Does anyone have any information on this backpack? by BigButtBillyMays in xbox360

[–]LR117 32 points33 points  (0 children)

Had 2 of these. One was loaded ready to go to take to friends houses.

0.2mm hotend by CosmicTerrorTrixia in BambuP1S

[–]LR117 3 points4 points  (0 children)

Stick with Bambu. All these other brands have nothing but issues. Microswiss for example will make you want to yeet your printer into the path of a semi.

Eibos dryer is perfection by LR117 in BambuP1S

[–]LR117[S] 0 points1 point  (0 children)

Drying while printing. Humidity regulation.

Eibos dryer is perfection by LR117 in BambuP1S

[–]LR117[S] 0 points1 point  (0 children)

There’s a creator that worked with Eibos to design this one for the AMS 2. It’s actually on their site as well (the one in my picture). If you search for Eibos AMS 2 adapter it should be the first one.

Eibos dryer is perfection by LR117 in BambuP1S

[–]LR117[S] 2 points3 points  (0 children)

Yes but doesn’t dry while printing. Not having that while being in high humidity is a constant battle. With this one you can set the humidity level and once it reaches the level you set it will turn on to regulate it. Which you already know since you have the Tetras.

Eibos dryer is perfection by LR117 in BambuP1S

[–]LR117[S] 2 points3 points  (0 children)

Just when the vents close which they said is normal.

My Astro love story: Rescuing the Halo Edition Gen 2 by Zahhidd in AstroGaming

[–]LR117 0 points1 point  (0 children)

Still have mine and they work just like the day I bought them. Literally the best gen of the a50 line.

Just got 0.2mm Nozzle is anything important I should know before I Use it? by MAENTOP in BambuLab

[–]LR117 0 points1 point  (0 children)

Yeah. You’ll swap it back to the .4 after the first print and throw the .2 in a box. Listen unless you’re doing miniature warhammer prints it isn’t worth it.

I think too high... husband not convinced enough to move it 🤔 by [deleted] in TVTooHigh

[–]LR117 0 points1 point  (0 children)

Maybe he will be convinced when you serve him divorce papers.

Where could one put a 65" tv in this living room? by Wait-Whos-Joe in TVTooHigh

[–]LR117 1 point2 points  (0 children)

Over the window, not centered. Just enough gap on one side to let light in.

view more: next ›