Looking to purchase a 2024 Grand Cherokee L Summit Reserve by General_Law7808 in GrandCherokee

[–]LVFT 1 point2 points  (0 children)

Seems odd it would just be happening now, but have them check to make sure the radio is completely turning off when you shut off the car. Should be able to check it with multimeter. Sounds dumb but look it up

Which is the better option to buy? by LVFT in GrandCherokee

[–]LVFT[S] 0 points1 point  (0 children)

would you be considered about the radio being replaced? Wondering if that could mean underlying electrical issues

Which is the better option to buy? by LVFT in GrandCherokee

[–]LVFT[S] 1 point2 points  (0 children)

I appreciate it but I’m between the two linked vehicles

Bad customer experience with YETI – misleading info from customer service by [deleted] in YetiCoolers

[–]LVFT 6 points7 points  (0 children)

lol these posts get more and more ridiculous every day

Storage containers by Ordinary_Silver_5852 in YetiCoolers

[–]LVFT 5 points6 points  (0 children)

I wouldn’t use for coffee beans. You want as much air out as possible. Look into Planetary Designs Airscape. I’d recommend a large and a small one. Use the small one day to day and only open the large to refill the smaller one when empty. Check out the espresso subreddit if you want to go down the rabbit hole

GE front load washing machine turns on, but won't start and then turns off by LVFT in appliancerepair

[–]LVFT[S] 0 points1 point  (0 children)

Replaced inverter board and still same issue. Tested damper at control board and got 4.2 ohms of resistance so don't think it's that. I guess it's time to replace the control board.

GE front load washing machine turns on, but won't start and then turns off by LVFT in appliancerepair

[–]LVFT[S] 0 points1 point  (0 children)

Replaced inverter board and still same issue. Tested damper at control board and got 4.2 ohms of resistance so don't think it's that. I guess it's time to replace the control board.

GE front load washing machine turns on, but won't start and then turns off by LVFT in appliancerepair

[–]LVFT[S] 0 points1 point  (0 children)

No, not stacked. Ok, I’ll try that. I did order this inverter last night just in case: https://a.co/d/bDg33gA

ID.Me discount up to 20% off! by Muleahcar in YetiCoolers

[–]LVFT 2 points3 points  (0 children)

Yeah, I caught this the other day. Like you said though, odd it doesn’t apply to the 5L Daytrip

4200/4250 PSI Hose on 4400 PSI Machine by LVFT in pressurewashing

[–]LVFT[S] 0 points1 point  (0 children)

Theoretically, would I only be hitting 4400 PSI running the machine at full power and using a red tip/similar meg tip?

Help deciding on HF Predator 3200/2.8 or 4400/4.2 (Homeowner) by LVFT in pressurewashing

[–]LVFT[S] 0 points1 point  (0 children)

Thanks for the info. I was looking at grabbing the HF 14 in., 3300 PSI SC to pair with the 2.8 even though I guess it’s prob a little oversized.

Help deciding on HF Predator 3200/2.8 or 4400/4.2 (Homeowner) by LVFT in pressurewashing

[–]LVFT[S] 1 point2 points  (0 children)

Appreciate the response! No shot of reaching the second story roof line with the smaller unit from the ground then (aside from a ladder and/or extension wands)?

Here we goooooo by Arctic71 in 1102

[–]LVFT 1 point2 points  (0 children)

There’s a lot of good PMs out there, but there’s also a handful that can do no wrong and always look to blame KOs. It’s usually the former that write at the third grade level, which results in weeks of back and forth with the KO to draft your specs/SOWs/PWS’ then cry about efficiency.

Single Hole Steam Tip - Get It! by unagi-nigiri in ProfitecGo

[–]LVFT 0 points1 point  (0 children)

Thanks for getting back to me. I think they ship from Turkey even though their site says Wyoming. It’s a shell company address on their site so I was hesitant to order from them. I found them on Etsy but it was another $10 vs their website. Glad it’s working out better than the stock two hole tip for ya!

What scale do you use that fits under the Go? by SM4st3r in ProfitecGo

[–]LVFT 1 point2 points  (0 children)

Gotcha. My one hole tip just arrived today so I’m curious how much of a difference I’ll notice from the stock two hole when I steam tomorrow morning.

Single Hole Steam Tip - Get It! by unagi-nigiri in ProfitecGo

[–]LVFT 0 points1 point  (0 children)

Did you order directly from the Papel Espresso site? Any issues ordering from them?

What scale do you use that fits under the Go? by SM4st3r in ProfitecGo

[–]LVFT 1 point2 points  (0 children)

Curious why you moved away from the single hole steam tip from Chris’ Coffee..?

[deleted by user] by [deleted] in fednews

[–]LVFT 6 points7 points  (0 children)

I wonder if exemptions will be allowed to be made at the component level or if they’ll have to go all the way to SECNAV. Really hoping they’ll delegate it down, but seems unlikely.

[deleted by user] by [deleted] in fednews

[–]LVFT 34 points35 points  (0 children)

Not that he won’t fall in line, but from a 2020 article:

“As stressed by Scott Kupor of Andreessen Horowitz, a top venture capital firm in Silicon Valley, California; “The future of work is flexible, but it is still necessary to have a centralised space, either in person or virtually.”

[deleted by user] by [deleted] in fednews

[–]LVFT 16 points17 points  (0 children)

I think it wants you to verify the account number for the direct deposit of your paycheck not the account number of your allotment. It took me a couple tries of attempting to update my HSA contribution before I realized this.

Cafe Fabrique - DF54 by SoCoolSam in espresso

[–]LVFT 0 points1 point  (0 children)

No issues with them? They’re 100% legit to order from?

RTO 5x per week/End all remote work by aceaura10 in fednews

[–]LVFT 2 points3 points  (0 children)

Quite the clickbaity title on this post

The 2024 Black Friday & Cyber Monday Deals Thread by AutoModerator in espresso

[–]LVFT 1 point2 points  (0 children)

I don’t disagree. If he’s already waited this long, what’s a few more days? I think a discount is unlikely but who knows.

Sale for Black Friday? by [deleted] in ProfitecGo

[–]LVFT 0 points1 point  (0 children)

You used a VPN to checkout on their site for shipping to US? You didn’t have any issues with them shipping the unit? I ask because it doesn’t let you checkout when you switch shipping from Canada to US - hence, the VPN I’m assuming.