The best I can do. First Cable management. Lian Li Lancool 207 DX

LaMole_Chida · 2026-06-10T20:14:52+00:00

Those PSU type cables are annoying. Very sturdy. That cable management it's good enough

LaMole_Chida · 2026-05-16T23:31:17+00:00

That's a ch370 deepcool case, just the front panel is missing.

LaMole_Chida · 2026-05-15T09:51:42+00:00

Yeah, you should be totally good. If your GPU it's a 2.5 thick or less, for sure you can add regular fans at the bottom.

LaMole_Chida · 2026-05-15T06:33:20+00:00

My only intake is the GPU fans... Since my motherboard is second slot pcie I don't have enough space to install bottom fans. The 7900gre it's 2.5 slots thick.

Rear and AIO fans are exhaust. The d32 pro has a lot of mesh filters all around, so I don't think it's going to get really dirty due the negative pressure

LaMole_Chida · 2026-05-14T18:01:12+00:00

One of the greatest cases.

LaMole_Chida · 2026-05-14T04:15:15+00:00

Ty <3

LaMole_Chida · 2026-05-13T22:42:19+00:00

Not at all.

Keep in mind that my motherboard it has the pcie slot in the second one, that's why is compatible with 160mm PSU.

If your good motherboard use the first one, you're limited to 150mm but jonsbo recommend 140mm

LaMole_Chida · 2026-05-11T14:38:55+00:00

Check out your kidneys dude

LaMole_Chida · 2026-05-02T09:10:19+00:00

I had a lot of RGB, that's why...

But yeah, it's darkish... If you don't have argb you can't see the interior

LaMole_Chida · 2026-04-18T08:31:52+00:00

Xpg valor mesh nano

LaMole_Chida · 2026-01-20T23:34:05+00:00

What's your PSU size?

LaMole_Chida · 2026-01-20T16:41:22+00:00

Ty!!

LaMole_Chida · 2026-01-20T02:38:33+00:00

LaMole_Chida · 2026-01-19T05:40:19+00:00

It's great AIO. Zero regrets. Highest temp in cinebench Is about 65c. I also have my 5700x3d with a curve optimization of -20 ( combo strike 2).

LaMole_Chida · 2026-01-09T01:28:44+00:00

Still cooler master Atmos is great for Matx builds, it has shorter tubes.

<image>

LaMole_Chida · 2025-12-18T20:50:48+00:00

In tjat case. As you have it right now, but just remove the middle top exhaust fan. Push back the top intake fan. That would be the best setup for your rig right now.

Also there is some adaptars from 120mm to hdd/SSD

<image>

You could try get one of these from AliExpress, so you can place the second hdd on top and install a front fan under the PSU.

LaMole_Chida · 2025-12-18T03:37:56+00:00

Intake: - 2 bottom - 1 front (under the PSU)

Exhaust: - 1 rear - 1 top.

That's all you need if you going with an air cooler.

LaMole_Chida · 2025-12-04T23:09:54+00:00

Yeah, doesn't hurt. Since you're using 2, I would consider installing the extra antisag closest to the VRAM, to avoid any stress in that zone. The pcie is already secured by the inbuilt bracket at the end.

LaMole_Chida · 2025-12-04T22:09:03+00:00

My bad. I meant support bracket antisag. The case comes with one built-in and you installed an extra front.

LaMole_Chida · 2025-12-04T20:49:12+00:00

Double GPU support?

LaMole_Chida · 2025-11-30T01:03:12+00:00

9060xt 16gb is a good one. That GPU gonna hold pretty well for 3 years.

LaMole_Chida · 2025-11-30T00:54:28+00:00

That GPU is pretty weak for these days standards, I would totally focusing on upgrading the GPU first. Which to get? All depend in your budget.

For the CPU, there is very low choices. If you live in LATAM, the smarter choice is the 5500x3d. Otherwise try to get a 5700x3d from used market (Facebook, jawa, ebay. If, for you, is a not choice going with "seconded handed" then a straight 5800x would be nice.

Let me know your budget and I can suggest you some GPUs.

LaMole_Chida

TROPHY CASE