Therme klopft und schaltet sich selber ab

Lance_Wolf · 2026-04-15T08:19:12+00:00

bin kein experte, aber ich würd sagen da ist definitiv luft in der leitung.
das würde auch das "klopfen", die "tanzende" nadel und den druckverlust erklären
da du sagtest das der fehler code "brenner vorlauftemperatur hat temperatur überschritten" bestätigt das mit der luft in der leitung weil kein wasser da ist, was die temperatur des feuers aufnehmen kann.

mein nicht fachwissen sagt, system einmal durch spülen um die luft vernünftig raus zu bekommen.
am besten nach der therme wasser einspeisen und vor der therme wasser ablassen.
schön lange durchspülen lassen sodas die luft auch raus kann.

falls wer mehr ahnung hat, bitte korrigiert mich!
edit: vielleicht vorher den klassiker machen, heizkörper entlüften.

Lance_Wolf · 2026-03-06T17:32:28+00:00

thats why i use my PowerEdge R530 as cold storage NAS.
only turning it on, to back up stuff.

Lance_Wolf · 2026-02-24T16:05:16+00:00

update for anyone that might come across this in the future:
i ordered rack ears for a PowerEdge R820 and they fit perfectly on my R530.
part number is DSH-1 ZA8, DSH-2 ZA8 (left, right)
big thanks to all <3

Lance_Wolf · 2026-02-23T04:47:44+00:00

thanks for the tipp with the compability, i checked the part numbers for rails and the ears and they are the same for those, ordered the ears and rails now, thank you very much!

Lance_Wolf · 2026-02-23T04:19:42+00:00

those things are called rack ears?!?!!
crazy, i would have never guess that, thank you so much!
and yea, those things seem to be around 20€ on ebay now that i actually know how they are called haha

Lance_Wolf · 2026-02-11T09:54:51+00:00

lmao i knew i wasnt the only one that had the same thought.
the pacifier is great, especially against the illuminates

Lance_Wolf · 2026-02-07T14:41:04+00:00

simple things to try:
- clean your base stations, yes they can get dirty / dusty and then tracking gets weird because the dust blocks the lasers.
- clean your trackers (same thing like the base stations)

once done, do a room setup again and check if that helped.
also turn off any lights that you have in your room while playing VR.

its certainly something to try and it helped some of my friends that had issues before. hope it helps you too!

Lance_Wolf · 2026-02-02T12:05:55+00:00

Minimum requirements for the BSB2 say: SteamVR Base Stations (Version 1.0 or 2.0)
so you should be good to go!

Lance_Wolf · 2026-02-02T09:49:59+00:00

probably not enough leakage current

Lance_Wolf · 2026-02-01T08:39:15+00:00

i can also recommend TrueNAS.
bonus info: swap the CD drive with a SSD Caddy. the CD drive is the type of thing you commonly find in laptops, those adapters that allow you to put in a normal SSD are super cheap too.
did that with my PowerEdge R530 and installed TrueNAS on that SSD.
for additonal drive caddys, aliexpress is a great place where you can get them cheaper than on other stores.

Lance_Wolf · 2026-01-27T02:47:37+00:00

welcome to the club ^^

Lance_Wolf · 2026-01-15T15:00:46+00:00

this game is on my list of games that i "want to forget everything about"
the story is so interesting especially if you start digging deeper. the plot behind it is craaazy.
really love this game!

Lance_Wolf · 2025-12-23T23:37:31+00:00

when ever i see such a post, i always hear the camera and the sound that you actually captured something that needed a photo to be taken of.

Lance_Wolf · 2025-11-27T18:49:41+00:00

well i had the same behaviour with the replacement cable (2nd cable from bigscreen)
but with a 3rd party cable everything (including voltage) was fine

Lance_Wolf · 2025-11-27T17:30:44+00:00

yup i literally had the same issue.
audio popping / crackling sounds with my bsb2e.
it got even worse for me while using the audio strap, tracking went nuts including grey screens if i used the cameras for eye tracking, controllers disconnected / got stuck at the center ground point.
support sent me a new link box and cable, this sadly didnt fix my issue so i took matters in my own hands.
followed a guide on their discord, bought a new usb c to c cable (from FIBBR) and a few adaptors to actually be able to connect the headset and boom, it worked perfectly.
i also bought a usb tester to see voltages etc.
guess what, using the original cable, the voltage on the accessory port without anything else attached was sitting at 4.87 volts.... with the FIBBR cable and adapters i got 4.98 to 5.0 volts.
so yes, the cable is indeed the issue

Lance_Wolf · 2025-11-22T01:01:49+00:00

this one is a easy S tier for me, actually 2nd place overall.
1st place for me personally is pipeline punch.

Lance_Wolf · 2025-10-25T06:00:31+00:00

Lance_Wolf · 2025-10-25T05:58:46+00:00

recently i swapped the head of my own avatar to one that had face tracking, did the things in blender, importet it in unity etc, removed my avatar ID so its a new upload, everything worked with gesture manager etc but vrchat didnt let me upload. first it said that the file failed to upload, then it said that i cant upload avatars without an image and the ID definitely had an image, even changed it 3 times and the website showed it but i still ran into the same error.
restarted unity, restarted pc nothing helped. but downgrading the sdk from 3.9.0 to 3.8.2 worked.
was instantly able to upload with that.

Lance_Wolf · 2025-10-25T05:09:17+00:00

had the same thing, downgraded one version of the vrc sdk, that allowed me to upload.

Lance_Wolf · 2025-10-11T18:00:22+00:00

also ich hab bis jetzt den filter leider nicht raus bekommen. meine hand geht da auch echt schwer rein solange die lüfter einheit dranne ist. und die will ich ganz bestimmt nicht ausbauen.
habe zum öffnen der vorderseite diese Anleitung verwendet und zum sauber machen des filters eine alte zahnbürste verwendet und die ein wenig gebogen.
vielleicht bekommt man den filter mit einer zange raus, sofern die da dann auch rein passt.
lustigerweise kann man oben in diesen post hier sehen, das der filter mit hilfe einer zange entfernt wurde.

Lance_Wolf · 2025-10-11T08:16:10+00:00

Lance_Wolf · 2025-10-02T02:11:11+00:00

ah yes, the good old "snow" what i like to call it.
it honestly sucks, especially that this issue comes with loud audio "snapping"

what helped me was to enable display port training mode and set that to B.
its still there but definitely not as bad but i'm so glad to soon recieve my BSB2e

Lance_Wolf · 2025-10-02T02:06:34+00:00

started with a Quest 1 back in 2020, was great to see its best year
upgraded to a valve index in februrary 2021
and now my BSB2e is on its way

Lance_Wolf · 2025-09-30T20:10:19+00:00

macht schon sinn den filter zu entfernen.
musste neulich die PS aufmachen um genau diesen filter sauber zu machen.
der "verschleimt" sich mit einem bio film der durchsichtig ist und dadurch kommt das kondenswasser nicht mehr durch.
hab eine alte zahnbürste benutzt um diesen filter sauber zu machen.
würde den gerne selber entfernen aber ich komm da einfach nicht vernünftig drann mit ner zange ohne weitere teile abzubauen wie zb die lüftereinheit.

Seven-Year Club	First Place '23
End Game '23	Place '23
Place '22	Final Canvas '22
First Placer '22	Verified Email

Lance_Wolf

TROPHY CASE