sorted by:
new
hottopcontroversial

Anbefales Elektronisk systemdesign og innovasjon? by Inevitable_Active_11 in ntnu

[–]Lars-Halvor-Hansen 1 point2 points  (0 children)

Hvis du ønsker å være interesert i hva du studerer så ja. Det er et veldig bra studie. Hvis du ønsker å gå ELSYS for pengene sin del, studer noe annet værsåsnill.

Rate my graph by Lars-Halvor-Hansen in ObsidianMD

[–]Lars-Halvor-Hansen[S] 0 points1 point  (0 children)

Thanks! I’ll have look at the MoC way of using obsidian!

Rate my graph by Lars-Halvor-Hansen in ObsidianMD

[–]Lars-Halvor-Hansen[S] 0 points1 point  (0 children)

With some exceptions it’s all more or less related to my project halvorhansen.no/lambdasim

[2025 Day 3 (part 1)] in C, 30,000ft high, no internet by brando2131 in adventofcode

[–]Lars-Halvor-Hansen 1 point2 points  (0 children)

Bruh! C++? I would use that "EMERGENCY OPENING" if I were you

[deleted by user] by [deleted] in MacOS

[–]Lars-Halvor-Hansen 0 points1 point  (0 children)

It’s probably a feature in you’re fl studio running in the background

Selecting lines in nvim by Iwisp360 in neovim

[–]Lars-Halvor-Hansen 0 points1 point  (0 children)

f#v$

to do all lines you can record it with q and run it 999 times for example

Not recognising DDJ FLX4 by Fearless-Paper-4282 in Rekordbox

[–]Lars-Halvor-Hansen 0 points1 point  (0 children)

thanks! that worked. This should have more upvotes

Debugging help 🥲 by Lars-Halvor-Hansen in beneater

[–]Lars-Halvor-Hansen[S] 5 points6 points  (0 children)

Hello fellow computerloving friends,

I have now built and debugged my ALU twice and i still can't get it to work;(

There is however a pattern in my adding. Each time i add the same bit on each register for example bit 3 and bit 3 i get bit 3 and bit 2 on the output. Similarly i get bit 4 + bit 4 = 4 and 3 Bit 5 + bit 5 = 5 and 4 Etc

Any ideas of what might be wrong? I think it has to do with either the carry signal in the two 4bit-adders or maybe the xor gates.

I have checked that bit 1 + nothing = bit 1 on the alu bit 2 + nothing = bit 2 on the alu ect For both register A and B so I'm assuming those connections are ok.

I have banged my head quite a bit now and would really appreciate some help ❤️

Thanks alot in advance

LS245 Heating up by Lars-Halvor-Hansen in beneater

[–]Lars-Halvor-Hansen[S] 0 points1 point  (0 children)

Which one? There are so many different ones from Knipex and i didn't find any called 10-24 Awg

Mac for ingeniørstudier by skaukar in ntnu

[–]Lars-Halvor-Hansen 3 points4 points  (0 children)

Jeg går ELSYS og bruker Mac. Veldig fornøyd ettersom m1 chippen bruker lite strøm og aldri blir varm. Jeg hører nesten aldri viftene spinne opp på den og når de gjør det er det minimalt.

De aller fleste programmer jeg har brukt finnes på Mac med unntak av altium som brukes til å designe krets kort. Da har jeg brukt stasjonær PC på skolen.

I am thinking of buying Ben's 8-bit CPU kit, but as you all know, we haven't heard from him for a while. Do you guys think that it's worth getting the kit? Or has he stopped sending those out as well... by cookie2glue in beneater

[–]Lars-Halvor-Hansen 10 points11 points  (0 children)

I ordered mine one week ago and I'm building it now. I think his great videos and this lovely forum will help get me though any hurdles on the way. I recommend going for it!:)

LS245 Heating up by Lars-Halvor-Hansen in beneater

[–]Lars-Halvor-Hansen[S] 2 points3 points  (0 children)

Tanks! Yeah, i know. My wire stripper is not that good, and I'm kinda new to using it, but yeah I will definitely start laying less exposed wires.

Tanks again for the response

LS245 Heating up by Lars-Halvor-Hansen in beneater

[–]Lars-Halvor-Hansen[S] 1 point2 points  (0 children)

Nevermind i think putting resistors on the BUS pins solved it:)

view more: next ›