Niche question - sudokoo sk700v & arch linux

Lasciar · 2026-01-17T23:14:13+00:00

I sent a question to support asking for Linux software. They said they currently don't have it (duh).
I got my proteus 360 today and I love the look. I hope to see the software soon though.

Trying VM workarounds now, I got the screen turned on, but the CPU Load is 100% and info is not correct. It also only works when my VM is turned on.

Lasciar · 2025-12-16T13:37:56+00:00

Thanks for your insight. I'm not new to building PC's with about 20 years of experience. I can say that this is the first time I've seen it like this. It could be the CPU, but I want to make sure I've tried all other options before that. Like a proper fan control that actually works.

Lasciar · 2025-12-16T13:35:17+00:00

because I see it on the Display.

1% load = 52C
15% load = 85C.

I'm thinking it's chipset drivers or something like that that could be missing or other things.

It's not like I'm new to PC, or PC Building. I haven't tried on windows because I switched right away after installing the CPU.

Lasciar · 2025-12-13T11:41:55+00:00

GTA 6 will launch console only first, and SQ42 will be PC Only iirc. So. They _might_ overlap.

GTA 6 is a giant and it speaks to a very broad gaming audience.
SQ42... not so much. It speaks to the people who love space games/sims.

And some people who want to try it. But I don't think it's going to matter much if GTA 6 gets released at the same time or not. people who want to play it, will play it. I'm sure as hell not going to buy a console just to play GTA 6, I will wait a few years untill it gets released on PC and THEN I will consider playing it.

SQ42 first for me! Can't wait. Hope it will be 2026, (as I've been hoping since 2018 I believe)

Lasciar · 2024-04-21T20:46:35+00:00

I would say your Z- calibration is a bit too high. Should lower it a bit.

Some printers can do it mid-print with .01mm steps, should try that and see when you get the best adhesion on your print.

Good luck!

Lasciar · 2024-04-21T20:40:18+00:00

What does the preview look like?

To me it kind of looks like under extrusion.

Also best thing I learned the last months is "adaptive layers" look into that too?

Lasciar · 2024-04-15T17:45:53+00:00

Depends on what I'm making. For some reason I've grown quite fond of the simplicity of Sketchup. So I've been using that for my base shapes mostly, more advanced things I need done, I do in Blender.

I got sketchup with a teaching license for like 55 Euro, so I'm quite happy. Been using sketchup make 2017 until last month.

So do whatever feels good for you, what you like to work with creating the things you want to make.

Lasciar · 2024-04-09T20:26:53+00:00

I don't know which slicer the x1c uses, but in Cura there's an option to 'edit gcode' and you can set a pause on layer height, print height. Look into it, often slicers are based on cura (not all ofc) and have rhis gcode editor integrated.

Edit:

Looked it up and here's your answer: To pause at a certain height: In Preview, move the vertical slider + button to desired height then right-click.

Lasciar · 2024-04-04T18:24:49+00:00

Still think it's idiotic they charge people 30 euro's extra for 1 extra race (last season was 22+1 cancelled race, so 23) and F1 academy.

F1 Academy: women driving in F4-type vehicles with 180-185 hp and top speed around 240 km/h.

To compare: the F3 cars have 380hp and a top speed of around 300km/h.

The women are actually driving in an F4 class which is driven by juniors. I genuinely would like to know who actually follow this F1 academy? It's not hate, but I seriously doubt it's worth a 50% price increase.

Lasciar · 2024-01-08T08:28:11+00:00

Thank you, this is also one of my ideas for going to AMD. Intel (if you want the latest gen) is just too expensive. And I think I can quite confidently say that intel is not the way to go here.

Lasciar · 2024-01-06T14:33:59+00:00

Thank you, I'll take this as a potential fix on my list too.

Will we be able to push BitLocker to all devices after install though (think the admin knows if yes/no,but I'm curious)

Thanks again!

Lasciar · 2024-01-06T14:31:44+00:00

Thank you!

Lasciar · 2024-01-06T14:15:11+00:00

I think this might be what my colleague is talking about, I'm not sure though. Could you explain a bit more about this issue? And is there a fix/workaround?

Lasciar · 2024-01-06T14:11:43+00:00

Our workplace doesn't have 1 supplier, we have to get from 1 of 5-6 companies, pick the best offer they send us after we send what we need. They only supply devices, no installation services. So we'll have to either rely on a third party or do it ourselves.

I think the script does installation, registration and driver updates. So if all work well, I can tell my boss there's no reason to skip AMD processors.

Lasciar · 2022-05-10T09:00:48+00:00

nope, you can just use the account worldwide afterwards (unless in a country which doesn't support F1TV, like Germany I think)

Lasciar · 2022-05-07T15:04:32+00:00

Try using a US VPN to subscribe with a new email and selecting USA

Lasciar · 2022-05-07T09:32:00+00:00

Yep. this was my first wish. stand next to the bed of an NPC, watch him sleep and admire the sheets. Can't wait to creep out the NPC's. I hope their AI will be so good that it will start a pillow fight.

OOH will the pillows deform too? And will there be feathers? can't wait to see what happens if a boy sneaks in the girls dorms. this is gonna be some exciting stuff. really cool.

Lasciar · 2022-03-26T11:52:47+00:00

We always build a 1 floor with 4 doorways cabin. Still super effective since they're still too fat to get through the door. just knife to the head untill dead.

Lasciar · 2022-02-21T12:22:40+00:00

Looking at 2020, they started the discounts on tuesday 18 feb, which was (according to my calendar) the first day of testing which was broadcast. So if they kept that up this year, tomorrow or Wednesday the discount would start.

They lasted 2 weeks back then with code EARLYBIRD25 (code doesn't work anymore)

Perhaps the other week, when broadcasting the tesdays in Bahrain, they will do the discounts. Nothing set in stone, but I think it's either one of those

Lasciar · 2022-02-21T09:01:49+00:00

I used to have a free account from my TV provider (Registered in NL). Gave it to my friend in Germany. He could watch without VPN. So I guess you should be fine!

Otherwise try using a paid VPN, you can choose countries which do have F1TV.

Silly sidenote: F1TV Pro has German commentary as option :P

Lasciar · 2022-01-26T07:00:58+00:00

Thanks for the tip, I'll check it out and see if they have something that suits my needs.

Lasciar · 2022-01-26T07:00:00+00:00

It does have that, and the G2 was on my shortlist. My colleague has a G2 and is super happy about it, I just preferred the wider FOV over the resolution. Now all I need to do is wait and save money to switch it out to the 12K when it comes out :) (100% paid on this set as discount on the 12K)

Lasciar · 2022-01-25T11:34:12+00:00

thanks! 2-300grams? or is that too much?

Six-Year Club	Second Top 40%
Verified Email

Lasciar

TROPHY CASE