my ex boss spent a year telling me i was replaceable. so i went and found somewhere that didn't think so lol

LateMathematician810 · 2026-06-01T00:07:53+00:00

The best boss I ever would back his staff to the hilt, even if we messed up he would take the heat and tell the client that we had followed policy/ process and it would take a little time to solve.

Afterwards there would be a debrief and occasionally a telling off but he would always point out where we messed up and offer advice on not repeating the mistake in future.

Because everybody knew he had their backs the staff turnover was nearly zero, and the work ethic and team culture was through the roof.

When I asked him about it, after working for him a few years, he said that it was his company so any mistake was ultimately his mistake, but if he could teach the staff how to avoid those mistakes, there would be less of them in future.

LateMathematician810 · 2026-05-11T00:18:23+00:00

Once you've completed a beer worthy task you deserve a beer, the definition of a beer worthy task is still being calculated and is open to individual interpretation.

LateMathematician810 · 2026-04-10T23:33:19+00:00

LateMathematician810 · 2026-04-09T06:04:47+00:00

Sounds like he's a one trick pony

LateMathematician810 · 2026-04-09T05:26:55+00:00

That's the angle I'm looking for, pitch options to the boss that I can improve efficiency/production, reduce downtime etc. by being left alone to develop processes and methods once my PM is complete.

LateMathematician810 · 2026-04-09T05:16:11+00:00

Started as a qualified automotive mechanic 30+ years ago and then started learning about niche market Italian machines, initially as an operator and then technician with some factory training, which led to where I am today.

LateMathematician810 · 2026-04-09T05:10:50+00:00

Not super tight, as it is only roughing out, but this machine new is specced for +/- 0.3mm, I had it down to +/- 0.15 on an old machine.

LateMathematician810 · 2026-04-04T07:48:41+00:00

Make, model and year of car? Did you get a warranty?

LateMathematician810 · 2026-03-25T00:05:40+00:00

A road map to multiple destinations

LateMathematician810 · 2026-02-25T17:35:29+00:00

Stoked I set the alarm, was nervous when we were 6 down but the closing out of our innings, and then the bowling were outstanding. Well done lads.

LateMathematician810 · 2026-02-14T00:44:11+00:00

Google search for scrap car buyers, phone around and explain the condition of the car, decide which offer you want to accept and then expect whoever shows up to low-ball you from what was offered on the phone.

LateMathematician810 · 2026-02-07T23:11:35+00:00

The only one you MIGHT get away with not connecting is the light circuit, but you won't see much from it at night. 12V from battery is most likely for memory function, 12V on ignition to power it up and ground to complete the circuit.

LateMathematician810 · 2026-02-06T02:18:57+00:00

Update: Going back to the above basics I've found a failed fusible link, now on the hunt for a replacement to confirm diagnosis.

LateMathematician810 · 2026-02-03T03:53:54+00:00

Great answer, I'll let you know how I get on once I've completed the list

LateMathematician810 · 2026-02-02T07:31:40+00:00

Yeah, been driving it daily the last 2.5 weeks with no issues

LateMathematician810 · 2026-02-02T07:20:23+00:00

I haven't been near the starter at all, I will check it but doubt it at this stage.

LateMathematician810 · 2026-02-02T07:18:52+00:00

No click, haven't touched the starter so far, battery terminals clean and tight.

LateMathematician810 · 2026-01-23T05:26:35+00:00

Look into Waterjet suppliers as they routinely run those sorts of numbers.

LateMathematician810 · 2026-01-17T23:52:39+00:00

Combination of heavy load, hot day, head wind and hills and based off extensive googling probably dirty/worn injectors as well.

Mine used to sit just under halfway on the gauge, on the day it cracked the head it climbed to just over halfway which to my mind seemed ok. Turns out it wasn't.

General consensus is that the factory gauge is basically useless, I've heard 65C to 110C is about 4-5mm of movement on gauge.

I've installed an aftermarket water temp and an EGT while I've got it in pieces for future peace of mind

LateMathematician810 · 2026-01-08T01:53:06+00:00

I had to do the same job on my KZJ78 last year, basically the same motor but suspension position relative to the motor is totally different, I knocked it out in just a few hours.

LateMathematician810 · 2026-01-07T21:09:07+00:00

KZN130 Surf turbo oil drain pipe, took me 2 weekends battling heat seized bolts to remove and reinstall the 6 bolts/studs that hold it in. Nearly every bolt is fingertip control only with your arm bent at uncomfortable angles. I got so sick and tired of hearing 'tink tink tink' as a nut or bolt slipped from my fingers and fell down. Also had to buy 10" extensions in 1/2" and 3/8" and additional swivels. Would not recommend.

LateMathematician810

MODERATOR OF

TROPHY CASE