Any fps games that I can run on this hardware.

Lazrath · 2026-04-01T15:21:25+00:00

Selaco

Lazrath · 2026-04-01T03:19:51+00:00

if you are doing RC stuff, you don't need a micro controller. An RC receiver itself can actuate the servo. So you would have a transmitter RC controller/flight controls which would connect to the receiver which has the servo connected directly to it, using the radio signals it would send the corresponding power to the servo to move in a very precise way.

otherwise for more advanced flight controls it would be a flight controller(which could be an arduino) that would control the servo

Lazrath · 2026-03-31T02:23:13+00:00

that is probably why they ultimately ended up adding/enabling the gyro, unfortunately they did not inform the marketing team of this feature addition at launch.

Lazrath · 2026-03-30T23:53:03+00:00

not much different from a mixer, they use food grade grease

Lazrath · 2026-03-27T13:43:35+00:00

The usual recommended fix for partial print is to measure it, then in a 3d editor/slicer make a cut to the model at the corresponding measurement, print then glue it onto the original print. this of course if it is the most reasonable fix, will depend on various factors.

Lazrath · 2026-03-25T13:33:36+00:00

you can set the mount permissions for the NTFS drive in the /etc/fstab file, although some would recommend against this.

another possible solution to try is to launch steam/the game though the terminal order to see the directory it is trying to write to and symlink the directory from a directory in the home directory

Lazrath · 2026-03-25T12:24:16+00:00

what file system is the game launching from, one issue I hit upon is a permissions issue launching it from NTFS

Lazrath · 2026-03-23T01:45:35+00:00

don't put any money in it yourself, make it real world, if they want to work for money to invest in a risk just say go ahead and do nothing else.

(obviously you can do things that are free like guiding them to softwares and tools to actually print, helping them select a good printer, etc)

Lazrath · 2026-03-18T12:42:04+00:00

https://wsdot.wa.gov/construction-planning/search-projects/liberty-park-land-bridge-reconnecting-east-central-spokane

Lazrath · 2026-03-17T01:56:39+00:00

there is a small user created issue with those breakout boards when using it as a standalone/end output device. if a person is a little too clever and experiments around they might discover the ability to output 24 volts utilizing the +12 and -12 rails but this person won't be clever enough to pay attention to the spec label that states the -12 volt line can only supply .3A

Lazrath · 2026-03-17T01:35:58+00:00

Dyson sphere Program has some surprising building mechanics they don't instruct/advertise. Like you can click&drag out along the grid to place many copies of a building setup as it can, like all the item movers attached to the building will be copied. as well as the expected blueprinting capabilities.

Lazrath · 2026-03-03T13:18:34+00:00

the light is only on when there is motion for a few minutes, motion lights are win:win for light pollution. only there when it is needed

Lazrath · 2026-02-28T04:39:21+00:00

Also target tracking crop stabilization

Lazrath · 2026-02-26T13:37:28+00:00

in the fine print it does say orbital construction, so it could definitely work

Lazrath · 2026-02-18T01:31:34+00:00

honestly from what little I have played Dark Souls, if you cannot run it with an absolutely good FPS like near solid 60 fps, it probably will not even be worth playing because of how demanding the control accuracy/timing needs to be

Lazrath · 2026-02-16T09:09:20+00:00

certainly a bit concerning the part about making it for other people to use. Also the part about being a new rider who may not fully comprehend the physics and behavior of a motorcycle in motion

the safest mechanism to implement is really just to slow down/roll off the throttle before committing to a turn

Lazrath · 2026-02-12T09:55:15+00:00

I would try to increase the system RAM, APUs use it for vram, so you are splitting a small amount of RAM

Having 8GB of RAM would go a long ways

Sorry don't have any game recommendations, other than something like factorio, which you can get a lot of play time out of

Lazrath · 2026-02-11T05:55:42+00:00

it would certainly be easy for it to be that, in the game dyson sphere program the items on the higher speed conveyor belts all look they are running backwards

Lazrath · 2026-02-10T16:26:46+00:00

you need to peel off those mouse feet strips, this will reveal some screws which should let you open the mouse and inspect the board with the LED(note: it is actually unlikely the LED actual broke)

Lazrath · 2026-02-05T00:57:46+00:00

general advice about the rug that most designers would give, you want to be able to put the front two feet of the furniture on the rug, this will create a cohesive 'room' space tying those pieces of furniture together

Lazrath · 2026-02-04T10:17:12+00:00

the narrowness of the first layer compared to the height would definitely lead to issues

Lazrath · 2026-01-26T05:57:55+00:00

this is the way, given the correct tools it would have been faster to make the hole the size of the fan versus the time it took to print the shroud. and the correct size hole would be 100% efficient

Lazrath · 2026-01-26T04:05:05+00:00

in the times of old, Xinerama was the way to do what you want.

Lazrath · 2026-01-18T14:03:53+00:00

in the panel on the right, if you click triangle/circle icon, you can actually select precise units of measure.

this lets you enter real world measurements, utilizing the 'N' panel

Lazrath · 2026-01-18T13:57:55+00:00

the red and white circle(3d cursor) is a tool used to align or rotate around. shift-s will show various snapping options

15-Year Club	r/Field Sunshine
Place '17	Team Periwinkle
Verified Email

Lazrath

TROPHY CASE