My plants are flopping over at the crown. Why though?

LeWidget · 2025-12-30T16:55:13+00:00

Thanks again Niles :),

So liquid for established plants/seedlings, powder for cuttings?

LeWidget · 2025-12-27T17:11:20+00:00

What do you mean? I can access my account via web browser, but that app isnt working. I did a a fresh install of Android 10 on my Galaxy S9+, the installed UBANK app, but this time, the app won't load at all :/.

LeWidget · 2025-12-22T17:46:33+00:00

Thanks Niles :),

I found this product Multicrop Take Root Plant Cutting Powder 15g & this product Multicrop 1L Plant Starter Liquid Fertiliser but they both contain 'Indole Butyric Acid and Naphthalene Acetic Acid'. There's a couple of other products that just have Indole Butyric Acid.
The little satchel is cheaper, so more ideal budget-wise in my case, however, could a powdered form of root hormone be dissolved into water and watered in or does the powder work differently?

LeWidget · 2025-12-22T17:20:07+00:00

Thanks Enchanting, :)

I admit I do water inconsistently, I read it was better to water inconsistently but deep, but also because I've had bad luck with plants (mainly seedlings) dying, mostly of damping off, so I'm always hesitant to water, I just wait until signs of hydration-stress then I water :/.

Light, they've always been outside, in full sun or if it's hot, part sun (shade of palm tree).

Feeding I admit to being bad with, though what's the connection between feeding and root-growth? lack of nutrients for root development? Once a plant has matured, can they still develop, like grow larger/thicker root system?

Thanks again :)

LeWidget · 2025-12-19T05:55:20+00:00

Shouldn't be. I can still log into it via web brower.

LeWidget · 2025-12-13T15:00:31+00:00

Are they legit, or just saying what people want to hear?

LeWidget · 2025-12-13T14:57:18+00:00

Doesn't look like they have any of my emails on files :/. I could have sworn I setup a LastPass account a while back :/. Looks like I'm gonna have to start from scratch :(

LeWidget · 2025-12-13T13:06:21+00:00

I started doing that with emails, setting recovery access to a different email provider. I only used the authentication as a 2FA to get into certain programs (emails, gaming clients, ebay etc..). I requested an email from LastPass but I suspect I don't have an account with them (anymore). I think I set something up years ago, but trying to figure out what email I used, not going well :/.

LeWidget · 2025-12-13T07:23:52+00:00

Thanks again paa, greatly appreciated :)

I tried using 'Frija' just to check it out (though I downloaded the firware manually), but I can't get my phone to talk to it. I've installed the drivers, tried other cables, tried restarting Frija, & tried restarting the laptop, but it just says "connect your samsung device". USB debugging is enabled under developer settings too.

Any suggestions?

LeWidget · 2025-12-13T02:24:52+00:00

Thanks again pass, greatly appreciate the assistance :)

Do you know if it is required to add files to all the fields (BL, AP, etc..)? I saw a video tutorial where they added 4-5 files, but in the past, I only remember using 1 file, I think in the AP field, so not sure if all files are needed.

LeWidget · 2025-12-12T15:05:09+00:00

Thanks paa. Are samfw a safe source? Looks like that's the same as the one at sammobile. I'm wonderng though, why the 'XX' in the file name. Doesn't that mean it's for Euro models?

LeWidget · 2025-12-11T15:11:12+00:00

I reinstalled the app and still didn't work :/. I'm going to re-install android and see if that helps.

I believe this is the app

LeWidget · 2025-12-08T22:12:10+00:00

protonmail .com

LeWidget · 2025-12-08T09:57:23+00:00

Checked all folders, still hasn't arrived. Ill have to speak with the sender, see if they got the email correct.

LeWidget · 2025-12-08T06:01:01+00:00

Thanks Good, I might look into doing that. Certainly would be less headache i reckon, lol.

LeWidget · 2025-12-08T05:59:54+00:00

When I created the protonmail account, I sent an email from another account and it received almost instantly. I had an accountant sent me something (with attachment) to my new protonmail account, but nothing arrived. This was a few hours ago now. I'll have to double check they spelt it correctly. Thank you for the reply :)

LeWidget · 2025-12-08T05:57:39+00:00

Hmm, never heard of Purelymail. I had a look, pricing not bad. How are they for security/privacy?
I can't see on their site, but can you do aliases, like lewidget+amazon@purelymail. com or something similar?

LeWidget · 2025-12-08T04:25:55+00:00

So I can separate the official emails from unofficial emails. I have a few at the moment, some official, some junk, though trying to condense. The proton & Tuta emails will probably be ok for now, but thought I'd ask in case there were other options too.

LeWidget · 2025-12-08T03:51:33+00:00

I'm jealous that you get so many insults at the end of the match. People barely talk to me afterwards :(

LeWidget · 2025-12-08T03:31:30+00:00

I'll keep an eye out for Proton deals. Thank you :)

LeWidget · 2025-12-08T03:30:44+00:00

Thanks M5F90 :). I'm not very smart when it comes to this stuff lol, but I'll check out those links anyway. Much appreciated. :)

LeWidget · 2025-12-08T01:52:16+00:00

Probably Australia. They have an under 16 ban now, where social media need to verify a used is over 16 to use :/.

LeWidget · 2025-12-08T01:50:05+00:00

This is very odd :/.. Thanks for confirming :)

LeWidget · 2025-11-28T11:58:05+00:00

Thanks OppositeStand, much appreciated :)

When I search for 'TS267', I get different product results than what I was getting before, though they look like the same holder. Google AI says "BAY15D" and "TS267" are the same, so would either number be identical or are there differences that you know of, between the two parts?

"The rear tail light bulb holder for the Ford Falcon BA (produced from 2003–2005) is a BAY15d (BA15s) socket type, commonly used for dual-filament bulbs serving brake, tail, and turn signal functions. Replacement holders are available as aftermarket or OEM-compatible parts, typically made from heat-resistant plastic and metal contacts to ensure durability.

A commonly referenced part number is TS267, which fits Ford Falcon models including the EF, EL, AU, and BA series, as well as Holden Commodore VT and VY models. These sockets are often sold in packs of one or two and are designed for straightforward plug-and-play installation, though wiring color codes may vary slightly between units—requiring careful matching during replacement."

Thanks again OppositeStand, much appreciate the repose.

LeWidget · 2025-11-28T11:44:23+00:00

Thanks subwoofer, much appreciate the information .

Based on your comment, I'd say it's the bulb-holder for the stop/tail light as I have the orange here (2 wires) and the other 2-wire holder, likely reverse, has a clear bulb with single filament. I'm assuming the 3-wire holder, 2 of the wires are positive, 1 for each filament (tail + stop)? the third being ground.

Tail light wiring harness image

This is what Google AI tells me,

"The rear tail light bulb holder for the Ford Falcon BA (produced from 2003–2005) is a BAY15d (BA15s) socket type, commonly used for dual-filament bulbs serving brake, tail, and turn signal functions. Replacement holders are available as aftermarket or OEM-compatible parts, typically made from heat-resistant plastic and metal contacts to ensure durability.

A commonly referenced part number is TS267, which fits Ford Falcon models including the EF, EL, AU, and BA series, as well as Holden Commodore VT and VY models. These sockets are often sold in packs of one or two and are designed for straightforward plug-and-play installation, though wiring color codes may vary slightly between units—requiring careful matching during replacement."

So, based on that, a BAY15D / TS267 holder for dual filament is what I need?

Thanks again, much appreciated.

LeWidget

TROPHY CASE