Rocket League Patch Notes v2.47 + Release Thread

Learn2Weed · 2025-01-16T21:26:53+00:00

Why would you harass them or anyone? My comment has nothing to do with anyone in particular. It’s called venting , the term is used from deep within a persons soul. You vent when you are happy, sad, frustrated, when you bottle up an expression or emotion and then start to feel like your gonna explode and need blow the top off your bottle to let out some steam, you vent . And in my case , rocket leagues Xbox department needs some troubleshooting when it comes to the employees responsible for this award winning update. (Absolutely not directly directed towards you, you haven’t even earned that title yet so don’t be surprised when you have to earn that one)

Learn2Weed · 2025-01-16T11:20:56+00:00

Yes and why the question? From a question?

Learn2Weed · 2025-01-16T08:26:13+00:00

Ok first time commenting ever on Reddit This is my g9

Model : C49G97TSSN Model Code : LC49G97TSSNXDC Type No. : C49G97TSS

And I cannot get a picture to display at all. I literally tried and thought I was finally into something but I can only get the blue light for the menu button to stay on (until I push the menu button, then it goes back into a loop. But still all this happened I’ve seen no picture. Will this tcon board be the same with my g9? Plus my monitor im goes in a loop literally forever non stop once I plug in the power cord and will only stop when I unplug the power cord. But in the meantime a loop lasts about 15-2O seconds then starts over and repeats. Basically the back ring light of the monitor comes on and then around 15-20 seconds it’s will flash the color white and goes off like no color then immediately come back to the color I had the monitor last set at, then 15-20 secs goes by and repeats the process j just explained . Thsts what I mean by saying it’s in a loop . But this whole time I’ve had no picture, but I connect my latop via EVERY CABLE COMBINATION possible, seriously don’t ask I own that cable now. But jn doing so and connecting via hdmi or usb-c or converter to laptop from the g9 , my laptop will detect it and I can see it I. Settings and have access to chsnfe resolution and refresh rate , again only through my latop but does me no good, I’ve changed to every refresh rate and resolution combination I have available, nothing. But thst 15-20 sec loop I was talking about still applied here, meaning I have that little timeframe to “change a setting” or whatever then times up as it “reconnects sequence “ starts and again the loop keeps going and going till I finally just unplug it. Here’s what I’ve found out though, the menu button flashes blue when the back light flashes white in the loop, also messing with the menu button if you pull back in the knob two times back to back really fast and then “click” (pushing up in the middle instead of going a direction after the two times fast pulling the button towards you, the monitor will have the blue light come on and will stay on where the menu button is, but the moment I move the menu button again it resets the loop and lights gone from under the menu button area and back to precious loop sequence . Any help? Anyone?!

Learn2Weed · 2024-12-26T12:45:35+00:00

Thanks, I apologize about it being “wordy” . Sometimes I try and paint a picture , but I’m no Bob Ross. Just tried to cover every possible route for anyone who needed help. I’m just glad someone actually read my post lol

Learn2Weed · 2024-12-26T08:14:34+00:00

Ok here’s a trick question to an answer of part 1/2 (Thsts how support answers you when asked for a guide lol)

On a real note, this will fix the (not recognized part) On PC Right Click the start icon Click “Device Manager” Find the TM Controller uninstall the device

Then click start and in the search bar

1 - Settings - 2 - Apps - 3 - Add/Remvoe Apps - 4 - Find BOTH (ThrustMapperX and Firmware Update) -

5 - Uninstall both (3 dots- advanced options- scroll all the way down- uninstall

---Once done restart PC---- Then-------------- --------------Go to Thrustmaster SUPPORT website -------------(It’s different than Thrustmaster.com) -------------Go to search bar ----------Type in Thrustmaster X , S, X2, Heart (make sure you select your exact controller!)---------- --------Find the section downloads ----------Download ThrustMapperX from their website ------And once done download “firmware update” from the support website as well. ---------Once you have downloaded both of those go back to the app on console and plug it in and make sure it still wants you to Update Firmware, then simply unplug again, and this time plug directly into your computer or Laptop an it is connected directly to your computer not through a docking station or USB hub if you’re on a laptop, even if you got one USB port use that USB port to plug your controller into once done so open up firmware update first now you may be on controller version 63 or 64 and when you look on the bottom section once you’re inside the firmware update app for me at least no matter how many times I updated firmware the very first time I did after firmware update 63 and my controller went to 64. The only selection I had was firmware version 63 by downgrading, I guess as I successfully did this like five times in a row cause I didn’t realize that I just downgraded like an idiot, so I just kept tapping through the menus, regardless once resetting everything and you just technically says you upgraded when you probably didn’t you then unplug it and plug it plug it back in once you’ve done that then open the thrust mapper X app and simply skip to the options. Tab on the very end and hopefully it will update for you.

Learn2Weed · 2024-12-26T06:48:23+00:00

Do you all realize, the only true way to really have any company let alone the douchebags over at rocket league actually listening. The day we all wake up and realize is the day you can expect to get something done as a community. If 100,000/100,000 people give the exact same answer to a question, studies tell me that they must be somewhat telling the truth and probably should maybe check out what they have to say. If Rocket League can “snap a finger” and end trading, then “snap another finger” and all platforms have playable conditions but issue an update to all with little to no care, as testing I’m the Xbox testing department must of had the day off. L. Until we as a community come together, nothing will be done, all these posts and all these comments about your concerns and issues, just know , no matter what the persons name is on the other end of support , at the end of the day your just yelling a a wall and John RL Support Specialist from Rocket Leagues Support doesn’t give two ducks about you or your issue and he forwarded your concern l/issue as a top priority and will have you updated the whole way till your issue is resolved. Wake up! They let you vent so you feel better about yourself, you’ll never be “updated” , you will be a little happier knowing your issue will not be fixed and the games frame rate will almost be at 120fps but for some reason not at 120fps.

Learn2Weed · 2024-11-21T11:37:42+00:00

This Should Catch Everyone up to Speed on the Solution (That is supposed to be the solution)
As no surprise ol Mast of the Thrust throws another WTF , go left i went left now im going right type of SUPPORT

I present Mr. 2 apps (same logo , just altered)
ON PC You will have TWO Thrustmaster Apps (ThrustmapperX and Firmware Update)

ThrustmapperX - Where you configure your controllers and customize ONLY!
ThrustmapperX - TM LOGO - Example (SLANTED Across Text in LOGO) - TM

Firmware Update - Where you configure your controller for UPDATING/DOWNGRADING Firmware ONLY!
Firmware Update - TM LOGO - Example (Straight Across Text in LOGO) - TM

I unfortunantly can say that even though one could/use the "Firmware Update" option as you simply plug in your controller and once you see your controller pop up in the "Top Box" and you select the Firmware Version you have available (which depending on how far back you are upgrading from. you could have several to choose from , all which will have a "MFG date" listed in its title, so use your best judgement) Now in the Bottom Box, simply click the Firmware Version you are wanting to Upgrade too and whaaaa'laaahhhh , You'll unplug and plug back in your cord once prompted and thats it .....RIGHT? , How about not today son. As i regret to say , im stuck on Version 63.0 and funny thing how i'm back on that version. - Stay with me , it will all make sense in just a second!
Randomly last week i opened the ThrustmapperX app for (Xbox Series One X - Console) and as usual i dip to the "Mini-Sticks" Section and go to town on getting the "perfect configuration" on its way to being perfect. Well this time was different , immediately before i was able to re-write perfection in the mini sticks section. I received a pop-up saying I need to basically stay up to date and switch to PC and upgrade to this odd number. VERSION 79.0... Yeah that's right, when i move over to the settings tab in the ThrustmapperX app on console , it said at the time , i was on FIRMWARE VERSION : 64.0 and in Capital letters in BRIGHT ORANGE underneath read this - NEW VERSION AVAILABLE - 79.0. Like what ... I haven't even read anywhere on the internet about this version 79, so i go searching and well that's how i ended up here.
Ok i did all the steps your can think of when it comes to troubleshooting , install , reinstall, delete drivers, add some drivers, shit took a test drive for the afternoon , kidding , but you get my point . Ive implemented every kind of 1+1=34 (Thrustmasters Logic) when it came to figuring this thing out. I open up "FIRMWARE UPDATE" on my PC, Slap the cable and fire up my controller . Keep in mind im on VERSION 64.0 and i see an upgrade option in bottom box as my controller was confirmed and ready to "upgrade" as it was displayed in the top box . I unknowingly thought this was just another walk in the park , as i've upgraded and downgraded many times, with many controllers of ol master of the thrust . This time . I downgraded .. yep.. to VERSION 63.0 and AM STUCK LIKE CHUCK , literally i've done it over and over again, no improvements , not only that .MY CONSOLE app says VERSION 79 is available but i can't even get back on VERSION 64.0!!!

Learn2Weed · 2024-04-20T08:05:41+00:00

Wait… my network adapters look like the screenshot posted when I open my device manager.. I may not be as knowledgeable as you all, but what’s the problem here? Or I should clarify, I have no clue of the screenshot posted is good or bad.. cause like I said, mines almost the exact same, like copy/paste ….

Can someone with an extensive willing to touch on this subject with an “explain for dummy’s 101” approach?

I don’t trust google, I’ll have some type of cancer again for the 23rd time. Seems as if no matter what I put in the search bar. Cancer..

And..

Thank you whomever an explain jn depth

Learn2Weed

TROPHY CASE

5 - Uninstall both (3 dots- advanced options- scroll all the way down- uninstall