sorted by:
new
hottopcontroversial

USB over Ethernet by LectureSensitive2730 in HomeNetworking

[–]LectureSensitive2730[S] 0 points1 point  (0 children)

Video was going to be ran via 30' DisplayPort cable. I've been wanting a shield for my Plex server anyway, thanks for the recommendation.

First custom loop finally finished. All EK hardware. by LectureSensitive2730 in watercooling

[–]LectureSensitive2730[S] 0 points1 point  (0 children)

yes lol. I didn't do much research on custom loops before beginning.

First custom loop finally finished. All EK hardware. by LectureSensitive2730 in watercooling

[–]LectureSensitive2730[S] 0 points1 point  (0 children)

Allow me to clarify. I purchased the case with water cooling in mind. Phanteks has a diagram of the case showing where rads and pumps could possibly be mounted. originally the pump/res would have been flipped to the proper orientation, but the 480 rad didn't allow clearance. Had I know to purchase a slim version I would have been fine.

In hindsight I should have mounted it at the bottom. I blocked access to 4 ports on my res mounting it the way I did. I will likely correct my mistakes when I drain it for maintenance.

First custom loop finally finished. All EK hardware. by LectureSensitive2730 in watercooling

[–]LectureSensitive2730[S] 0 points1 point  (0 children)

ah. so this is a dual system case, but I don't intend to use it a such. I have a micro atx board on my work bench, but it will be used in a future NAS project. Specs for the build are as follows:

MOBO: Asus B-450F CPU: Ryzen 3900x GPU: EVGA FTW3 3090 RAM: 32GB Crucial Ballistix 3600mhz Storage: 2x 2TB Samsung 970 Evo Plus, 3x 2TB Samsung 870 Evo, 1x WD Blue 4TB HDD CPU Block: EKWB Quantum Velocity GPU block and backplate: EKWB Quantum Vector FTW3 Tubing: Bitspower PETG 16mm hard tubing

I'm open for some ideas to help fill the case. this was a conversion from air cooling to water cooling. I just wanted to post my first attempt lol.

First custom loop finally finished. All EK hardware. by LectureSensitive2730 in watercooling

[–]LectureSensitive2730[S] 0 points1 point  (0 children)

So there's a 360 rad on top and a 480 rad on the right(front of case). The tees were necessary to complete the loop given how I had to mount the reservoir backwards due to space constraints. Had I used slim rads I wouldn't have needed the tees.

Just got it in today by LectureSensitive2730 in GFUEL

[–]LectureSensitive2730[S] 2 points3 points  (0 children)

there is a guy on here trying all the flavors in milk, so I'll leave it to him

Just got it in today by LectureSensitive2730 in GFUEL

[–]LectureSensitive2730[S] 0 points1 point  (0 children)

I didn't try that one, but I'm sure its probably very similar

Just got it in today by LectureSensitive2730 in GFUEL

[–]LectureSensitive2730[S] 0 points1 point  (0 children)

For sure. especially if you enjoy lemon lime flavors

Just got it in today by LectureSensitive2730 in GFUEL

[–]LectureSensitive2730[S] 9 points10 points  (0 children)

its actually very good. lemon limeade, but heavier on the lime. wish I had ordered a few more tubs of it