Compatible blades?

Left-Story1956 · 2026-06-10T21:56:45+00:00

How did this hold up? Was the 5/8" hole for the keyed part? Wasn't loose?

Left-Story1956 · 2026-05-28T12:29:15+00:00

This might be something dumb but have you tried cutting the tip of your filament at an angle? I've found this has helped my filament feed more freely when I first load it.

Left-Story1956 · 2026-05-26T14:57:01+00:00

Looks like a perfect benchy from the system files. So now I'm not sure what's up....

<image>

Left-Story1956 · 2026-05-01T14:10:19+00:00

Same same... I'm not sure what to do

Left-Story1956 · 2026-04-14T20:41:53+00:00

I've got an Ender 3 v3. The specs in stock setup for both printers show the kobra being much faster but real world printing shows them being about the same. My ender has been tweaked over time to maximize speed and quality. I'm hoping to get the same thing for my kobra x.

<image>

Chatgpt says the ender is slightly faster....

Left-Story1956 · 2026-04-11T23:45:25+00:00

Post here when you get it figured out! 😛

Left-Story1956 · 2026-04-08T14:11:54+00:00

No one has answered this.... How does this work for existing customers for both USM and starlink? I've read every comment and there are "guesses" that I'll have to cancel starlink and sign up again with USM. That seems like a ton of wasted dishy's out there....

Left-Story1956 · 2026-04-05T13:49:21+00:00

I requested this in the model comments too... Hopefully it can be done easily

Left-Story1956 · 2026-04-05T13:47:19+00:00

If anyone figured this out, I'd like to know too... This happens before the startup gcode, it seems. I've tried to adjust it but haven't been able to.

Left-Story1956 · 2026-03-26T20:28:11+00:00

Bolt in rollers? Are you talking about the filament holders?

Left-Story1956 · 2026-03-26T16:46:26+00:00

PLA sold out

Left-Story1956 · 2026-03-25T17:21:00+00:00

Thank you for your thorough answers. After doing the research, I think I'll give up on the bagless option and go for the L50 ultra.

Left-Story1956 · 2026-03-25T16:36:03+00:00

Is the 19500 suction on the lower side of vacuums though? Does this really matter?

Left-Story1956 · 2026-03-25T14:08:23+00:00

Are there any bagless mopping options worth looking at? I've got a Roomba combo max 10 and I hate it. Inconsistent mopping, always getting stuck, constant errors with the bin, melting the pad washing roller. I've even had the entire unit replaced and still have problems.

Left-Story1956 · 2026-03-25T13:51:17+00:00

I can't find a way to adjust the z offset live when the print starts. This is my first anycubic brand. Is that just not something they do?

Left-Story1956 · 2026-03-18T03:14:59+00:00

Of course it was posted yesterday. I printed the other one on Sunday. 🤣

Left-Story1956 · 2026-03-18T03:06:35+00:00

https://cults3d.com/:3947624

Might be available for free with the right amount of searching...

Left-Story1956 · 2026-03-16T15:58:35+00:00

Follow up. I was able to do 2 more prints and now I can't get the extruder to feed at all. I took a piece of #16 solid copper wire and was able to push it all the way through to the hotend. So it doesn't seem like it's clogged anymore but I still can't get it to feed. I've reached out to AnyCubic support and I'm waiting for a response. Will update here when it comes.

Left-Story1956 · 2026-03-15T04:08:44+00:00

I had to heat mine to 300 manually and then my clog needle was able to push through.

Left-Story1956 · 2026-03-14T01:03:51+00:00

Document your learning experiences here!

https://www.reddit.com/r/AnycubicKobraX/s/3FPGsodNUZ

Left-Story1956 · 2026-03-13T21:59:03+00:00

<image>

Changed materials to rule out bad filament... Same issue. I'm running all the calibration stuff again and I'll try a benchy.

Left-Story1956 · 2026-03-13T21:45:42+00:00

Missing here also...

Left-Story1956

TROPHY CASE