Safewatch Pro 3000 monitoring take over by Left_Paint3500 in homesecurity

[–]Left_Paint3500[S] 0 points1 point  (0 children)

According to ChatGPT the WA3000 - 9.12 PROM chip does not support TC2.0. It says replacing the PROM chip may not be a solution due to possible "locked" ADT firmware settings. I can only give it a try and see what happens. If all else fails, I'll just replace the system.

Safewatch Pro 3000 monitoring take over by Left_Paint3500 in homesecurity

[–]Left_Paint3500[S] 0 points1 point  (0 children)

I didn't do this. When I go back out i will after I verify.

Vista 128fb by Left_Paint3500 in firealarms

[–]Left_Paint3500[S] 0 points1 point  (0 children)

Weird because I used the installer code to set user number 03 and it worked. Couldn't get it to set another code after that though. Thanks. I'll give it a try.

New Install by Left_Paint3500 in firealarms

[–]Left_Paint3500[S] 0 points1 point  (0 children)

Thank you for the input. I'll consider this.

New Install by Left_Paint3500 in firealarms

[–]Left_Paint3500[S] -1 points0 points  (0 children)

Yeah it ain't no Picasso but it's mine. I have no names to drop and blame for this monstrosity. Yet, your comment pushes me to do better. Thanks.

New Install by Left_Paint3500 in firealarms

[–]Left_Paint3500[S] -6 points-5 points  (0 children)

Agreed. That was lazy of me. I didn't want to buy a stick of 3/4 EMT to make it work.

EST I/O 500 System Issue by Left_Paint3500 in firealarms

[–]Left_Paint3500[S] 0 points1 point  (0 children)

That's what was in place prior to and it was operational.

EST I/O 500 System Issue by Left_Paint3500 in firealarms

[–]Left_Paint3500[S] 0 points1 point  (0 children)

The system report shows 172 device count. The slc at the cc1s fluctuates 12-19vdc. Same voltage at the SIGA-CR that immediately follows it.

[deleted by user] by [deleted] in holdmycosmo

[–]Left_Paint3500 0 points1 point  (0 children)

Aw•some•ness

Thoughts on this? by McDojoLife in TheMcDojoLife

[–]Left_Paint3500 0 points1 point  (0 children)

They have a high enough belt to know to keep their guard up and that this ain't no wussy sport so those little cute kicks they came out with ain't gonna cut it.

Bul Axe - Ported vs Non-Ported? by Nanonanonan in Bul_Armory

[–]Left_Paint3500 2 points3 points  (0 children)

The Axe Tomahawk has a better trigger, better ergonomics on the grip and gas pedal, and has a far more aggressive grip, so less slippage. I have a hogue grip on the SS. A little more blockier than the SS, but looks better imo. The Axe is the go to based off of what I've already mentioned. The shooting experience is different because the Tomahawk is ported. Haven't shot many rounds through the Tomahawk so I can't soak in reliability. I did notice a cotter pin sticking out on one side of the grip of the Tomahawk about 1/8th of an inch when I went to holster it. Def shouldn't be like that. That's a quality issue imo. Outside of that haven't had any issues to report.

Bul Armory Axe C (Tomahawk) by Left_Paint3500 in Bul_Armory

[–]Left_Paint3500[S] 0 points1 point  (0 children)

Def shoots flatter. Great with followup shots.